This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Rule
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
584
as of
11/16/2026 at 12:15 pm EST
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2021-27008 as it appeared on Public Inspection on
12/09/2021 at 4:15 pm.
It was viewed
10
times while on Public Inspection.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2021-27008 (86 FR 70725)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule; request for comments.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 505 helicopters. This AD was prompted by a report of chafing of the right forward tail rotor (T/R) control cable. This AD requires inspecting the right forward T/R cable and, depending on the results, removing the cable assembly from service. This AD also requires measuring the clearance between the right forward T/R control cable and the roller bracket cut out and, depending on the results, adjusting the height of the roller bracket assembly position. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective December 28, 2021.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of December 28, 2021.
The FAA must receive comments on this AD by January 27, 2022.
ADDRESSES:
You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:
Federal eRulemaking Portal:
Go to
https://www.regulations.gov.
Follow the instructions for submitting comments.
Fax:
(202) 493-2251.
Mail:
U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Hand Delivery:
Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
For Bell service information identified in this final rule, contact Bell Textron
( printed page 70726)
Canada Limited, 12,800 Rue de l'Avenir, Mirabel, Quebec J7J 1R4, Canada; telephone 1-450-437-2862 or 1-800-363-8023; fax 1-450-433-0272; email
productsupport@bellflight.com;
or at
https://www.bellflight.com/support/contact-support.
For S-TEC Corporation service information identified in this final rule, contact S-TEC Corporation, One S-TEC Way, Mineral Wells Municipal Airport, Mineral Wells, TX 76067; telephone (817) 215-7600. You may view this service information at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (812) 222-5110. Service information that is incorporated by reference is also available at
https://www.regulations.gov
by searching for and locating Docket No. FAA-2021-1066.
Examining the AD Docket
You may examine the AD docket at
https://www.regulations.gov
by searching for and locating Docket No. FAA-2021-1066; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The street address for the Docket Operations is listed above.
The FAA is adopting a new AD for certain serial-numbered Bell Textron Canada Limited Model 505 helicopters that have S-TEC Corporation HeliSAS stability augmentation system and autopilot installed under Supplemental Type Certificate SR09758DS. The FAA received a report that, during an inspection, chafing was discovered on the right forward T/R control cable due to contact with the autopilot yaw servo bracket, which is part of the HeliSAS stability augmentation system. Additional review revealed that the installation instructions did not include a minimum clearance limit between the right forward T/R control cable and the autopilot yaw servo bracket, which allowed the positioning of the autopilot yaw servo bracket such that it did not prevent contact and chafing. Since this discovery, S-TEC revised the installation instructions to specify a minimum cable clearance limit.
This condition, if not addressed, could result in failure of the right forward T/R control cable, loss of T/R control, and subsequent loss of control of the helicopter. The FAA is issuing this AD to address the unsafe condition on these products.
FAA's Determination
The FAA is issuing this AD because the agency has determined the unsafe condition described previously is likely to exist or develop in other products of the same type design.
The FAA reviewed Bell Alert Service Bulletin 505-21-27, dated October 7, 2021 (ASB). This ASB specifies inspecting the right forward T/R control cable in the area of the roller bracket assembly for any signs of contact and ensuring there is minimum clearance between the right forward T/R control cable and the roller bracket cut out. Depending on the results, this ASB specifies reporting information to Bell, replacing the cable assembly, and adjusting the height of the roller bracket assembly position.
This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in
ADDRESSES
.
Other Related Service Information
The FAA reviewed S-TEC Corporation Installation Instructions ST-974-II-0001, Revision 2, dated October 6, 2021. This service information contains information necessary for installing a HeliSAS stability augmentation system and autopilot, including information for adjusting the height of the roller bracket assembly position.
AD Requirements
This AD requires inspecting the right forward T/R control cable in the area of the roller bracket assembly for any signs of chafing and, if there is any chafing, removing the cable assembly from service. This AD also requires measuring the clearance between the right forward T/R control cable and the roller bracket cut out and, depending on the results, adjusting the height of the roller bracket assembly position.
Differences Between This AD and the Service Information
If there is chafing, the ASB specifies reporting certain information to Bell, whereas this AD does not.
Justification for Immediate Adoption and Determination of the Effective Date
Section 553(b)(3)(B) of the Administrative Procedure Act (APA) (5 U.S.C. 551et seq.) authorizes agencies to dispense with notice and comment procedures for rules when the agency, for “good cause,” finds that those procedures are “impracticable, unnecessary, or contrary to the public interest.” Under this section, an agency, upon finding good cause, may issue a final rule without providing notice and seeking comment prior to issuance. Further, section 553(d) of the APA authorizes agencies to make rules effective in less than thirty days, upon a finding of good cause.
An unsafe condition exists that requires the immediate adoption of this AD without providing an opportunity for public comments prior to adoption. The FAA has found that the risk to the flying public justifies foregoing notice and comment prior to adoption of this rule because the affected components are part of an assembly that is critical to the control of a helicopter. In addition, chafing could lead to instantaneous failure before detection. As the FAA has no information pertaining to the extent of chafing of the right forward T/R control cable that may currently exist in helicopters or how quickly the condition may propagate to failure, the actions required by this AD must be accomplished within 25 hours time-in-service or 30 days, whichever occurs first. This compliance time is shorter than the time necessary for the public to comment and for publication of the final rule. Accordingly, notice and opportunity for prior public comment are impracticable and contrary to the public interest pursuant to 5 U.S.C. 553(b)(3)(B).
In addition, the FAA finds that good cause exists pursuant to 5 U.S.C. 553(d) for making this amendment effective in less than 30 days, for the same reasons the FAA found good cause to forego notice and comment.
Comments Invited
The FAA invites you to send any written data, views, or arguments about this final rule. Send your comments to an address listed under
ADDRESSES
. Include “Docket No. FAA-2021-1066 and Project Identifier AD-2021-01189-R” at the beginning of your comments. The most helpful comments reference a specific portion of the final rule, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may
( printed page 70727)
amend this final rule because of those comments.
Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to
https://www.regulations.gov,
including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this final rule.
Confidential Business Information
CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this AD contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this AD, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as “PROPIN.” The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this AD. Submissions containing CBI should be sent to Hye Yoon Jang, Aerospace Engineer, Delegation Oversight Section, DSCO Branch, Compliance & Airworthiness Division, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5190; email
hye.yoon.jang@faa.gov.
Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking.
Regulatory Flexibility Act
The requirements of the Regulatory Flexibility Act (RFA) do not apply when an agency finds good cause pursuant to 5 U.S.C. 553 to adopt a rule without prior notice and comment. Because FAA has determined that it has good cause to adopt this rule without prior notice and comment, RFA analysis is not required.
Costs of Compliance
The FAA estimates that this AD affects up to 76 helicopters of U.S. Registry. Labor rates are estimated at $85 per work-hour. Based on these numbers, the FAA estimates the following costs to comply with this AD.
Inspecting the T/R control cable and measuring the clearance takes about 1 work-hour, for an estimated cost of $85 per helicopter and up to $6,460 for the U.S. fleet. Replacing the cable assembly, if required, takes about 8 work-hours and parts cost about $427 for an estimated cost of $1,107 per helicopter. If required, adjusting the height of the roller bracket assembly position takes about 1 work hour for an estimated cost of $85 per helicopter.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
This airworthiness directive (AD) is effective December 28, 2021.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Bell Textron Canada Limited Model 505 helicopters, serial numbers 65011 through 65234 inclusive, 65236 through 65348 inclusive, 65350, and 65352 through 65359 inclusive, with an S-TEC Corporation HeliSAS stability augmentation system and autopilot installed under Supplemental Type Certificate SR09758DS.
(d) Subject
Joint Aircraft System Component (JASC) Code 6720, Tail Rotor Control System.
(e) Unsafe Condition
This AD was prompted by a report of chafing of the right forward tail rotor (T/R) control cable caused by contact with an autopilot yaw servo bracket. The FAA is issuing this AD to detect and prevent chafing of the T/R control cable. The unsafe condition, if not addressed, could result in failure of the right forward T/R control cable, loss of T/R control, and subsequent loss of control of the helicopter.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Required Actions
Within 25 hours time-in-service or 30 days, whichever occurs first after the effective date of this AD, accomplish the following:
(1) Using a flashlight, visually inspect the right forward T/R control cable assembly part number M207-20M489-041 in the area of the roller bracket assembly for signs of chafing. Move the T/R pedals through the full range of motion and inspect the T/R control cable for chafing. If there is any chafing, before further flight, remove cable assembly part number M207-20M489-041 from service.
(2) Measure the clearance between the right forward T/R control cable and the roller bracket cut out as shown in Figure 1 of Bell Alert Service Bulletin 505-21-27, dated October 7, 2021. If the clearance is less than 0.3″ (7.6 mm), before further flight, adjust the height of the roller bracket assembly position until the clearance is a minimum of 0.3″ (7.6 mm).
(h) Alternative Methods of Compliance (AMOCs)
(1) The Manager, DSCO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14
( printed page 70728)
CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (i) of this AD. Information may be emailed to:
9-ASW-190-COS@faa.gov.
(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.
(i) Related Information
For more information about this AD, contact Hye Yoon Jang, Aerospace Engineer, Delegation Oversight Section, DSCO Branch, Compliance & Airworthiness Division, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5190; email
hye.yoon.jang@faa.gov.
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise.
(i) Bell Alert Service Bulletin 505-21-27, dated October 7, 2021.
(4) You may view this service information at FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110.