This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Rule
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Comments are no longer being accepted.
See DATES for details.
Regulations.gov Data
Enhanced Content - Regulations.gov Data
FederalRegister.gov retrieves relevant information about this document
from Regulations.gov to provide users with additional context. This
information is not part of the official Federal Register document.
MCAI-2023-00394-T; Embraer S.A. Model EMB-135BJ airplanes; missing sealant on rivets installed between rib 3 and the wing skin.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
137
as of
11/06/2026 at 10:15 pm EST
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2023-27678 as it appeared on Public Inspection on
12/15/2023 at 8:45 am.
It was viewed
4
times while on Public Inspection.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2023-27678 (88 FR 87336)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model EMB-135BJ airplanes. This AD was prompted by reports of missing sealant on the rivets installed in the interface between rib 3 and the wing skin. This AD requires applying sealant on the rivets installed in the interface between rib 3 and wing skin, as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective January 22, 2024.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 22, 2024.
ADDRESSES:
AD Docket:
You may examine the AD docket at
regulations.gov
under Docket No. FAA-2023-1807; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
For material incorporated by reference in this AD, contact ANAC, Aeronautical Products Certification Branch (GGCP), Rua Dr. Orlando Feirabend Filho, 230—Centro Empresarial Aquarius—Torre B—Andares 14 a 18, Parque Residencial Aquarius, CEP 12.246-190—São José dos Campos—SP, Brazil; telephone 55 (12) 3203-6600; emailpac@anac.gov.br;
website
anac.gov.br/en/.
You may find this material on the ANAC website at
sistemas.anac.gov.br/certificacao/DA/DAE.asp.
You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket atregulations.gov
under Docket No. FAA-2023-1807.
FOR FURTHER INFORMATION CONTACT:
Hassan Ibrahim, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3653; email
hassan.m.ibrahim@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Embraer S.A. Model EMB-135BJ airplanes. The NPRM published in the
Federal Register
on August 30, 2023 (88 FR 59813). The NPRM was prompted by AD 2023-03-01, effective March 6, 2023, issued by ANAC, which is the aviation authority for Brazil (ANAC AD 2023-03-01) (also referred to as the MCAI). The MCAI states that missing sealant was identified on the rivets installed in the interface between rib 3 and the wing skin in some Embraer Model EMB-135BJ airplanes. The lack of sealant when a failure on the rivet installation exists may result in a potential ignition source inside the fuel tank during a lightning strike, which, combined with flammable fuel vapors, could result in a
( printed page 87337)
fuel tank explosion and consequent loss of the airplane.
In the NPRM, the FAA proposed to require applying sealant on the rivets installed in the interface between rib 3 and wing skin, as specified in ANAC AD 2023-03-01. The FAA is issuing this AD to address the unsafe condition on these products.
You may examine the MCAI in the AD docket at
regulations.gov
under Docket No. FAA-2023-1807.
Discussion of Final Airworthiness Directive
Comments
The FAA received no comments on the NPRM or on the determination of the cost to the public.
Conclusion
This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.
ANAC AD 2023-03-01 specifies procedures for applying sealant on the rivets installed in the interface between rib 3 and wing skin.
This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the
ADDRESSES
section.
Costs of Compliance
The FAA estimates that this AD affects 10 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
Labor cost
Parts cost
Cost per
product
Cost on U.S.
operators
Up to 7 work-hours × $85 per hour = $595
$0
Up to $595
Up to $5,950.
The FAA has included all known costs in its cost estimate. According to the manufacturer, however, some or all of the costs of this AD may be covered under warranty, thereby reducing the cost impact on affected operators.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
2. The FAA amends § 39.13 by adding the following new airworthiness directive:
2023-24-02 Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.; Empresa Brasileira de Aeronáutica S.A. (EMBRAER)):
Amendment 39-22618; Docket No. FAA-2023-1807; Project Identifier MCAI-2023-00394-T.
(a) Effective Date
This airworthiness directive (AD) is effective January 22, 2024.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Embraer S.A. Model EMB-135BJ airplanes, certificated in any category, having serial numbers 14501119 through 14501165 inclusive, 14501167 through 14501215 inclusive, and 14501217 through 14501236 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 57, Wings.
(e) Unsafe Condition
This AD was prompted by reports of missing sealant on the rivets installed in the interface between rib 3 and the wing skin. The FAA is issuing this AD to address the lack of sealant on the rivets, which may result in a potential ignition source inside the fuel tank during a lightning strike when a failure on the rivet installation exists, which, combined with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, Agência Nacional de Aviação Civil (ANAC) AD 2023-03-01,
( printed page 87338)
effective March 6, 2023 (ANAC AD 2023-03-01).
(h) Exceptions to ANAC AD 2023-03-01
(1) Where ANAC AD 2023-03-01 refers to its effective date, this AD requires using the effective date of this AD.
(2) This AD does not adopt paragraph (c)(1) of ANAC AD 2023-03-01.
(i) No Reporting Requirement
Although the service information referenced in ANAC AD 2023-03-01 specifies to submit certain information to the manufacturer, this AD does not include that requirement.
(j) Additional AD Provisions
The following provisions also apply to this AD:
(1)
Alternative Methods of Compliance (AMOCs):
The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the International Validation Branch, send it to the attention of the person identified in paragraph (k) of this AD. Information may be emailed to:
9-AVS-AIR-730-AMOC@faa.gov.
Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2)
Contacting the Manufacturer:
For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or ANAC; or ANAC's authorized Designee. If approved by the ANAC Designee, the approval must include the Designee's authorized signature.
(k) Additional Information
For more information about this AD, contact Hassan Ibrahim, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3653; email
hassan.m.ibrahim@faa.gov.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) Agência Nacional de Aviação Civil (ANAC) AD 2023-03-01, effective March 6, 2023.
(ii) [Reserved]
(3) For ANAC AD 2023-03-01, contact ANAC, Aeronautical Products Certification Branch (GGCP), Rua Dr. Orlando Feirabend Filho, 230—Centro Empresarial Aquarius—Torre B—Andares 14 a 18, Parque Residencial Aquarius, CEP 12.246-190—São José dos Campos—SP, Brazil; telephone 55 (12) 3203-6600; email
pac@anac.gov.br;
website
anac.gov.br/en/.
You may find this ANAC AD on the ANAC website at
sistemas.anac.gov.br/certificacao/DA/DAE.asp.
(4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.