This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
Enforcement and Compliance, International Trade Administration, Department of Commerce.
As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) orders on welded stainless steel pressure pipe (WSSPP) from Malaysia, Thailand, and the Socialist Republic of Vietnam (Vietnam) would likely lead to the continuation or recurrence of dumping and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD orders.
Applicable May 21, 2025.
Ana Reed or Emily Gershon, Trade Agreements Policy and Negotiations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-5367, or (202) 482-2907, respectively.
On July 21, 2014, Commerce published in the Federal Register the AD orders on WSSPP from Malaysia, Thailand, and Vietnam.[1] On November 1, 2024, the ITC instituted,[2] and on November 4, 2024, Commerce initiated,[3] the second sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping, and therefore, notified the ITC of the magnitude of the margins of dumping likely to prevail should the Orders be revoked.[4]
On May 21, 2025, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.[5]
The products covered by these Orders are circular welded austenitic stainless pressure pipe not greater than 14 inches in outside diameter. For purposes of these Orders, references to size are in nominal inches and include all products within tolerances allowed by pipe specifications. This merchandise includes, but is not limited to, the American Society for Testing and Materials (ASTM) A-312 or ASTM A-778 specifications, or comparable ( printed page 22468) domestic or foreign specifications. ASTM A-358 products are only included when they are produced to meet ASTM A-312 or ASTM A-778 specifications, or comparable domestic or foreign specifications.
Excluded from the scope are: (1) Welded stainless mechanical tubing, meeting ASTM A-554 or comparable domestic or foreign specifications; (2) boiler, heat exchanger, superheater, refining furnace, feedwater heater, and condenser tubing, meeting ASTM A-249, ASTM A-688 or comparable domestic or foreign specifications; and (3) specialized tubing, meeting ASTM A269, ASTM A-270 or comparable domestic or foreign specifications.
The subject imports are normally classified in subheadings 7306.40.5005, 7306.40.5040, 7306.40.5062, 7306.40.5064, and 7306.40.5085 of the Harmonized Tariff Schedule of the United States (HTSUS). They may also enter under HTSUS subheadings 7306.40.1010, 7306.40.1015, 7306.40.5042, 7306.40.5044, 7306.40.5080, and 7306.40.5090. The HTSUS subheadings are provided for convenience and customs purposes only; the written description of the scope of these Orders is dispositive.
As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise.
The effective date of the continuation of the Order s will be May 21, 2025.[6] Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to fifth anniversary of the date of the last determination by the ITC.
This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.
These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4).
Dated: May 21, 2025.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement and Compliance.
1. See Welded Stainless Pressure Pipe from Malaysia, Thailand, and the Socialist Republic of Vietnam: Antidumping Duty Orders,79 FR 42289 (July 21, 2014) ( Orders).
Back to Citation2. See Welded Stainless Steel Pressure Pipe from China, Malaysia, Thailand, and Vietnam; Institution of Five-Year Reviews,89 FR 87416 (November 1, 2024).
Back to Citation3. See Initiation of Five-Year (Sunset) Reviews,89 FR 87543 (November 4, 2024).
Back to Citation4. See Welded Stainless Steel Pressure Pipe Orders from Malaysia, Thailand, and the Socialist Republic of Vietnam: Final Results of the Expedited Second Sunset Review of the Antidumping Duty Orders,90 FR 11718 (March 11, 2025), and accompanying Issues and Decision Memorandum (IDM).
Back to Citation5. See Welded Stainless Steel Pressure Pipe from China, Malaysia, Thailand, and Vietnam,90 FR 21790 (May 21, 2025) ( ITC Final Determination).
Back to Citation6. See ITC Final Determination.
Back to Citation[FR Doc. 2025-09564 Filed 5-27-25; 8:45 am]
BILLING CODE 3510-DS-P