The Department of Labor (DOL) has submitted the following public information collection request (ICR) to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995 (Pub. L. 104–13, 44 U.S.C. chapter 35). A copy of this ICR, with applicable supporting documentation, may be obtained from RegInfo.gov at
Comments should be sent to Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for the Mine Safety and Health Administration (MSHA), Office of Management and Budget, Room 10235, Washington, DC 20503, Telephone: 202–395–7316/Fax: 202–395–6974 (these are not a toll-free numbers), within 30 days from the date of this publication in the
The OMB is particularly interested in comments which:
• Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility;
• Evaluate the accuracy of the agency's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used;
• Enhance the quality, utility, and clarity of the information to be collected; and
• Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology,
Under 30 CFR 44.9, mine operators must post a copy of each petition for modification concerning the mine on the mine's bulletin board and maintain the posting until a ruling on the petition becomes final. This applies only to mines for which there is no representative of miners.
Under 30 CFR 44.10, detailed guidance for filing a petition for modification is provided for the operator of the affected mine or any representative of the miners at that mine. The petition must be in writing, filed with the Director, Office of Standards, Regulations and Variances, and a copy of the petition served by the filing party (the mine operator or representative of miners) on the other party.
Under 30 CFR 44.11(a), the petition for modification must contain the petitioner's name and address; the mailing address and mine identification number of the mine or mines affected; the mandatory safety standard to which the petition is directed; a concise statement of the modification requested and whether the petitioner (1) proposes to establish an alternate method in lieu of the mandatory safety standard, or (2) alleges that application of the standard will result in diminution of safety to the miners affected, or (3) requests relief based on both grounds; a detailed statement of the facts that show the grounds upon which a modification is claimed or warranted; and, if the petitioner is a mine operator, the identity of any representative of miners at the affected mine.
Promptly upon receipt of a petition, MSHA publishes a notice in the