Import Administration, International Trade Administration, Department of Commerce.
July 31, 2007.
Catherine Bertrand, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482–3207.
On November 1, 2006, the Department of Commerce (“Department”) published a notice of opportunity to request an administrative review of the antidumping duty order on certain hot–rolled carbon steel flat products from the People's Republic of China (“PRC”) for the period November 1, 2005, through October 31, 2006.
For purposes of this review, the products covered are certain hot–rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non–metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (
Specifically included within the scope of this review are vacuum degassed, fully stabilized (commonly referred to as interstitial–free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro–alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro–alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro–alloying levels of elements such as silicon and aluminum.
Steel products to be included in the scope of this review, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: i) iron predominates, by weight, over each of the other contained elements; ii) the carbon content is 2 percent or less, by weight; and, iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
All products that meet the physical and chemical description provided above are within the scope of this review unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this review:
The merchandise subject to this review is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, and 7211.19.75.90. Certain hot–rolled carbon steel flat products covered by this review, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and U.S. Customs purposes, the written description of the merchandise under review is dispositive.
Because neither Angang nor Baosteel made shipments to the United States of subject merchandise during the POR, and because we did not receive any comments on our
This notice is published in accordance with sections 751(a)(1) and 777(i)(1) of the Tariff Act of 1930, as amended, and 19 CFR 351.213(d)(4).