ENVIRONMENTAL PROTECTION AGENCY
[EPA–HQ–OPPT–2010–0800; FRL–8847–7
Certain New Chemicals; Receipt and Status Information
AGENCY:
Environmental Protection Agency (EPA).
ACTION:
Notice.
SUMMARY:
Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 30, 2010 to August 31, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES:
Comments identified by the specific PMN number or TME number, must be received on or before October 22, 2010.
ADDRESSES:
Submit your comments, identified by docket identification (ID) number EPA–HQ–OPPT–2010–0800, by one of the following methods:
•
Federal eRulemaking Portal
:
http://www.regulations.gov
. Follow the on-line instructions for submitting comments.
•
Mail
: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460–0001.
•
Hand Delivery
: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA–HQ–OPPT–2010–[insert Docket ID no.]. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564–8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
Instructions
: Direct your comments to docket ID number EPA–HQ–OPPT–2010–0800. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at
http://www.regulations.gov
, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.
Docket
: All documents in the docket are listed in the docket index available at
http://www.regulations.gov
. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at
http://www.regulations.gov
, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566–1744, and the telephone number for the OPPT Docket is (202) 566–0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT:
For technical information contact
: Bernice Mudd, Information Management Division 7407M, Office of Chemical Safety Pollution Prevention, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460–0001; telephone number: (202) 564–8951; fax number: (202) 564–8955; e-mail address: [
mudd.bernice@epa.gov
.
For general information contact
: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554–1404; e-mail address:
TSCA-Hotline@epa.gov
.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under
FOR FURTHER INFORMATION CONTACT
.
B. What Should I Consider as I Prepare My Comments for EPA?
1.
Submitting CBI
. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
2.
Tips for preparing your comments
. When submitting comments, remember to:
i. Identify the document by docket ID number and other identifying information (subject heading,
Federal Register
date and page number).
ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information and/or data that you used.
v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.
vi. Provide specific examples to illustrate your concerns and suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.
viii. Make sure to submit your comments by the comment period deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 30, 2010 to August 31, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TME
This status report identifies the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.
I. 62 Premanufacture Notices Received From: 7/30/10 to 8/31/10
Case No.
Received Date
Projected Notice End Date
Manufacturer/Importer
Use
Chemical
P–10–0477
07/30/10
10/27/10
3M
(S) Filler in epoxy resin
(G) Surface modified ceramic particle
P–10–0478
08/03/10
10/31/10
CBI
(G) Moisture curing polyurethane adhesive
(G) Isocyanate terminated urethane polymer
P–10–0479
08/03/10
10/31/10
CBI
(G) Moisture curing polyurethane adhesive
(G) Isocyanate terminated urethane polymer
P–10–0480
08/03/10
10/31/10
CBI
(G) Moisture curing polyurethane adhesive
(G) Isocyanate terminated urethane polymer
P–10–0481
08/03/10
10/31/10
CBI
(G) Moisture curing polyurethane adhesive
(G) Isocyanate terminated urethane polymer
P–10–0482
08/03/10
10/31/10
CBI
(G) Moisture curing polyurethane adhesive
(G) Isocyanate terminated urethane polymer
P–10–0483
08/03/10
10/31/10
CBI
(G) Moisture curing polyurethane adhesive
(G) Isocyanate terminated urethane polymer
P–10–0484
07/30/10
10/27/10
Elementis Specialties, Inc.
(G) Dispersant
(G) Esterified polymer of styrene, maleic anhydride and ethenylbenzene, potassium salt
P–10–0485
07/30/10
10/27/10
CBI
(G) Open, non-dispersive textile finish
(G) Modified fluorinated acrylate
P–10–0486
07/30/10
10/27/10
Sasol North America
(S) Enhanced oil recovery - injected downhole to spur oil production
(S) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-sulfo-.omega.-hydroxy-,C
12–13
-branched and linear alkyl ethers, sodium salts
P–10–0487
07/30/10
10/27/10
Sasol North America
(S) Enhanced oil recovery - injected downhole to spur oil production
(S) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-sulfo-.omega.-hydroxy-,C
14–15
-branched and linear alkyl ethers, sodium salts
P–10–0488
08/02/10
10/30/10
CBI
(G) Paper coating
(G) Poly(urethane urea)
P–10–0489
08/02/10
10/30/10
Honeywell
(S) Intermediate
(G) Pentahalosubstituted alkene
P–10–0490
08/03/10
10/31/10
CBI
(S) Hot melt adhesive for bonding different substrates like plastics, metals, wood, packaging materials, and leather
(G) Dimer fatty acid, polymer with tall-oil fatty acid, alkyl diacid and alkyldiamines
P–10–0491
08/04/10
11/01/10
GE Water and Process Technologies
(G) Separation coagulant
(G) Amphoteric acrylic polymer
P–10–0492
08/05/10
11/02/10
CBI
(G) Polymer additive
(G) Acetoacetonate end capped polyol
P–10–0493
08/06/10
11/03/10
CBI
(G) Curable epoxy resin
(G) Bisphenol A epoxy hema phthalate
P–10–0494
08/09/10
11/06/10
CBI
(G) Intermediate chemical product
(G) Polyphenol ether
P–10–0495
08/10/10
11/07/10
CBI
(G) Coating additive
(G) Poly(oxy-1,2-ethanediyl),.alpha.,-monoalkyl ethers-.omega.-mono(hydrogen maleate)-
P–10–0496
08/10/10
11/07/10
CBI
(G) Open, non-dispersive use (additive for coating layer)
(G) Poly acrylate
P–10–0497
08/10/10
11/07/10
Firmenich Incorporated
(S) Aroma for use in fragrance mixtures, that in turn are used in perfumes, soaps, cleansers, etc.
(S) 1-cyclohexene-1-propanal, 4,4-dimethyl-
P–10–0498
08/10/10
11/07/10
CBI
(G) Latent curing agent for polyurethanes
(S) Dodecanoic acid, 3-[[3-[[[2,2-dimethyl-3-[(1-oxododecyl)oxy]propylidene]amino]methyl]-3,5,5-trimethylcyclohexyl]imino]-2,2-dimethylpropyl ester
P–10–0499
08/10/10
11/07/10
CBI
(G) Latent curing agent for poyurethanes
(S) Dodecanoic acid, 1,6-hexanediylbis[nitrilo(2,2-dimethyl-1-propanyl-3-ylidene)] ester
P–10–0500
08/11/10
11/08/10
CBI
(G) Material for semi-conductor
(G) Oxybiscarbomonocyclic acid, polymer with oxybis[heteropolycyclic ketone],(alkyl(C=1–4)-substituted bis [alkyl(C=2–5)amine],[halo(haloalkyl(C=1–4)alkylidene]bis [aminocarbomonocyclicalcohol] and [halo(haloalkyl(C=14)alkyidene]bis (hydroxycarbomonocycle)]bis[aminobenzamide],alkyl(C=1–4)ester
P–10–0501
08/11/10
11/08/10
Xerox Corporation
(G) Destructive use (site limited intermediate)
(G) Substituted pyridone
P–10–0502
08/12/10
11/09/10
Dow Chemical Company
(S) Hardner for epoxy thermoset coating systems
(G) Polymer of formaldehyde, diamine and phenol
P–10–0503
08/12/10
11/09/10
Dow Chemical Company
(S) Hardner for epoxy thermoset coating systems
(G) Polymer of formaldehyde, diamine and phenol
P–10–0504
08/13/10
11/10/10
ICl-IP America Inc.
(S) Flame retardant on textiles
(G) Phosphoric acid, metal salt
P–10–0505
08/13/10
11/10/10
CBI
(G) Component in industrial cleaner
(G) Alkoxylated alkyl alcohol, ester with alknoenedioic acid, alkali metal salt
P–10–0506
08/17/10
11/14/10
Coim USA, Inc.
(S) Packaging adhesives
(S) 1,3-benzenedicarboxylic acid, polymer with 2,2-dimethyl-1,3-propanediol, hexanedioic acid and 2,2′-oxybis[ethanol]
P–10–0507
08/17/10
11/14/10
Avebe Inc.
(S) Production aid for parent / sizing emulsion for application in paper and paperboard
(S) Starch, oxidized, 2-hydroxy-3-(trimethylammonio)propyl ether, chloride
P–10–0508
08/19/10
11/16/10
Emery Oleochemicals LLC
(G) Chemical intermediate
(G) Mixed mono and di carboxylic acids
P–10–0509
08/19/10
11/16/10
Emery Oleochemicals LLC
(S) Polyester polyol for polyurethane ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings
(G) Ester polyol, fatty acid ester
P–10–0510
08/19/10
11/16/10
Emery Oleochemicals LLC
(S) Polyester polyol for polyurethane ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings
(G) Ester polyol, fatty acid ester
P–10–0511
08/19/10
11/16/10
Emery Oleochemicals LLC
(S) Polyester polyol for polyurethane ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings
(G) Ester polyol, fatty acid ester
P–10–0512
08/19/10
11/16/10
Emery Oleochemicals LLC
(S) Polyester polyol for polyurethane ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings
(G) Ester polyol, fatty acid ester
P–10–0513
08/19/10
11/16/10
Emery Oleochemicals LLC
(S) Polyester polyol for polyurethane ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings
(G) Ester polyol, fatty acid ester
P–10–0514
08/19/10
11/16/10
Emery Oleochemicals LLC
(S) Polyester polyol for polyurethane ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings
(G) Ester polyol, fatty acid ester
P–10–0515
08/18/10
11/15/10
CBI
(S) Binder for paints and coatings
(S) 2-propenoic acid, 2-methyl-, methyl ester, polymer with butyl 2-propenoate and
N
-(1,1-dimethyl-3-oxobutyl)-2-propenamide
P–10–0516
08/17/10
11/14/10
Cytec Industries Inc.
(G) Coatings resin
(G) Alkanoic acid ester, polymers with alkanolamine and substituted acrylate-blocked substituted polyalkylene-urethane polymer
P–10–0517
08/19/10
11/16/10
Dow Chemical Company
(S) Surfactant for architectural coatings; surfactant used in industrial metal cleaning solutions
(S) Oxirane, 2-ethyl-, polymer with oxirane, mono-C
12–14
-sec-alkyl ethers
P–10–0518
08/19/10
11/16/10
Dow Chemical Company
(S) Surfactant for architectural coatings; surfactant used in industrial metal cleaning solutions
(S) Oxirane, 2-ethyl-, polymer with oxirane, mono-C
11–15
-sec-alkyl ethers
P–10–0519
08/20/10
11/17/10
Coim USA, Inc.
(S) Resin used to make foam insulation
(S) Hexanedioic acid, polymer with 2,2-dimethyl-1,3-propanediol, 1,2-ethanediol and 1,6-hexanediol
P–10–0520
08/20/10
11/17/10
Cognis Corporation
(S) Agricultural pesticide inert adjuvant (to be FIFRA approved)
(S) 1,2,3-propanetriol, hydrogen sulfate, ammonium salt
P–10–0521
08/23/10
11/20/10
Wacker Chemical Corporation
(G) Contained use (chemical intermediate, consumed during polymer grafting)
(S) Siloxanes and silicones, di-me, polymers with me ph silsesquioxanes, methoxy-terminated
P–10–0522
08/23/10
11/20/10
DIC International (USA) LLC
(G) Adhesive for plastic films
(G) Polymer with aromatic polycarboxylic acid, aliphatic polycarboxylic acid and aliphatic polyol
P–10–0523
08/23/10
11/20/10
3M Company
(S) Oil-and water-repellent agent for hard surfaces
(G) Fluorochemical acrylate copolymer
P–10–0524
08/24/10
11/21/10
Dow Chemical Company
(G) Component of polyurethane coating
(G) Brominated polyurethane prepolymer of MDI
P–10–0525
08/24/10
11/21/10
Dow Chemical Company
(G) Component of polyurethane coating
(G) Brominated polyurethane prepolymer of MDI
P–10–0526
08/25/10
11/22/10
Anderson Development Company
(S) Powder coating resin
(G) Methacrylate co-polymer
P–10–0527
08/25/10
11/22/10
Anderson Development Company
(S) Powder coating resin
(G) Methacrylate co-polymer
P–10–0528
08/25/10
11/22/10
CBI
(G) Coatings
(G) Urethane acrylate
P–10–0529
08/26/10
11/23/10
Rhodia, Inc.
(G) Oil field additive
(G) Copolymer containing phosphonic, sulfonic and carboxylic acid groups
P–10–0530
08/27/10
11/24/10
CBI
(G) Polymer admixture for cements
(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyakylenediyl), sodium salt
P–10–0531
08/27/10
11/24/10
CBI
(G) Unsaturated polyester resin
(G) Unsaturated polyester resin
P–10–0532
08/27/10
11/24/10
C. l. Hauthaway and Sons Inc.
(S) Wood primer / seal coating- tannin stain blocker
(G) Polyester based aliphatic cationic waterbased polyurethane
P–10–0533
08/30/10
11/27/10
CBI
(G) Interior and exterior coating additive
(G) Styrene / acrylate copolymer
P–10–0534
08/31/10
11/28/10
CBI
(S) Coating ingredient
(G) Substituted poly[oxy(methyl ethanediyl)], substituted[[[[trimethyl[[[[(oxopropenlyl)oxy]ethoxy]carbonyl]amino]cyclohexyl]methyl]amino]carbonyl[[[[[trimethyl[[[[(oxopropen1yl)oxy]ethoxy]amino]cyclohexyl]methyl]amino]carbonyl]oxy-
P–10–0535
08/30/10
11/27/10
CBI
(S) Textile coating
(G) Propanoic acid, oxyalkylpropanoic acid, polymer with hydrazine, -hydro--hydroxypoly[oxy(methyl-1,2-ethanediyl)] and 5-isocyanato-1-(isocyanatomethyl)-alkylcyclohexane, compound with
N,N
-diethylethanamine
P–10–0538
08/31/10
11/28/10
CBI
(S) Textile coating
(G) Propanoic acid, oxyalkylpropanoic acid, polymer with hydrazine, -hydro--hydroxypoly[oxy(methyl-1,2-ethanediyl)] and 5-isocyanato-1-(isocyanatomethyl)-alkylcyclohexane, compound with 2-(dimethylamino)ethanol
P–10–0539
08/31/10
11/28/10
CBI
(G) Cathode in batteries
(G) Metal oxide
P–10–0540
08/31/10
11/28/10
CBI
(S) Textile coating
(G) Propanoic acid, oxyalkylpropanoic acid, polymer with hydrazine, -hydro--hydroxypoly[oxy(methyl-1,2-ethanediyl)] and 5-isocyanato-1-(isocyanatomethyl)-alkylcyclohexane, compound with 2-(dimethylamino)ethanol
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:
II. 1 Test Marketing Exemption Notices Received From: 07/30/10 to 08/31/10
Case No.
Received Date
Projected Notice End Date
Manufacturer/Importer
Use
Chemical
T–10–0006
08/17/10
09/30/10
Cytec Industries Inc.
(G) Coatings resin
(G) Alkanoic acid ester, polymers with alkanolamine and substituted acrylate-blocked substituted polyalkylene-urethane polymer
In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:
III. 31 Notices of Commencement From: 7/30/10 to 8/31/10
Case No.
Received Date
Commencement Notice End Date
Chemical
P–08–0224
08/04/10
07/30/10
(G) Fluoroalkyl acrylate copolymer
P–09–0147
08/04/10
07/08/10
(S) Formaldehyde, polymers with acetone-phenol reaction products and phenol, potassium sodium salts
P–09–0293
08/20/10
07/29/10
(G) Phosphoric acid, mixed esters with partially fluorinated alcohol, ammonium salts
P–09–0317
08/11/10
07/12/10
(S) Copper (2+), bis[
N
-[amino(imino-KN)methyl]urea-KO]-, nitrate (1:2)
P–09–0334
08/09/10
07/30/10
(S) 8AH-2,4A-methanonaphthalene-8A-ol, octahydro-1,1,5,5-tetramethyl-
P–09–0370
07/30/10
06/29/10
(G) Polyester modified MDI prepolymer
P–09–0527
08/26/10
05/27/10
(G) Fatty acids, polymer with an aromatic diol, C
18
-unsaturated fatty acids dimers, epichlorohydrin and triethylenetetramine
P–09–0556
08/17/10
07/26/10
(G) Modified ketal
P–09–0614
08/13/10
08/02/10
(G) 2-propenoic acid, 2-methyl-, C
12–15
-branched and linear alkyl esters, polymers with alkyl methacrylates alkyl peroxide-initiated
P–09–0645
08/27/10
08/20/10
(G) Substituted alkyl phosphate ester, ammonium salt
P–10–0007
08/23/10
08/02/10
(G) Distillates (petroleum), light thermal cracked, reaction products with phenol, carboxylated, metal salts
P–10–0023
08/23/10
08/06/10
(G) Benzenesulfonic acid, 4-amino, azo pigment
P–10–0112
08/24/10
08/05/10
(G) Benzene dicarboxylic acid, polyester with glycol and polyethylene glycol
P–10–0138
07/30/10
07/15/10
(G) Long chain alkylacrylate, homopolymers
P–10–0139
07/30/10
07/15/10
(G) Long chain alkylacrylate, homopolymers
P–10–0144
08/17/10
07/16/10
(G) Methyl-phenyl silicone resin with alkoxy groups
P–10–0201
08/09/10
07/28/10
(G) Polyether polyurethane
P–10–0205
08/11/10
07/21/10
(G) Poly(aryl ether) polymers
P–10–0228
08/11/10
07/15/10
(G) Benzoic acid derivative
P–10–0234
08/09/10
07/12/10
(S) 2-cyclopentene-1-acetic acid, 2-ethylbutyl ester
P–10–0239
08/20/10
08/12/10
(S) 1,2,3-benzothiadiazole-7-carboxylic acid
P–10–0258
08/30/10
08/16/10
(G) Sulfonated heteropolycycle
P–10–0259
08/30/10
08/16/10
(G) Sulfonated heteropolycycle
P–10–0285
08/16/10
08/06/10
(S) Benzoic acid, 3-amino-2-mercapto-
P–10–0312
08/18/10
08/05/10
(S) 2,5-furandione, telomer with ethenylbenzene and (1-methylethyl)benzenem imides with polyethylene-polypropylene glycol 2-aminopropyl me ether
P–10–0323
08/23/10
08/06/10
(G) Alkyl methacrylate polymer with branched benzene, alkyl acrylate, hydroxyalkyl methacrylate, methacrylic acid and substituted methacrylate, alkaline metal salt
P–10–0345
08/13/10
07/21/10
(G) Hexanoic acid, 6-[[2-[[5-[[2,7-dihydro-3-methyl-2,7-dioxo-1-(3-sulfobenzoyl)-heteropolycycle-6-yl]amino]-2,4-disulfophenyl]amino]-2-oxoethyl]amino]-, ammonium sodium salt (1:?:?)
P–10–0346
08/13/10
07/21/10
(G) Copper, phthalic anhydride-2,3-pyridinedicarboxylic acid-urea reaction products complexes, aminosulfonylsulfo[[2-[[4-[(2-sulfoethyl)amino]-6-[(4-sulfophenyl)amino]-monoheterocycle-2-yl]amino]ethyl]amino]sulfonyl derivates, sodium salts
P–10–0351
08/27/10
08/16/10
(G) Modified acrylonitrile, butadiene polymer, hydrogenated
P–10–0352
08/23/10
08/02/10
(G) Benzene, isocyanatoalkyl-, polymer with diisocyanatoalkane, polyalkylene glycol alkyl ether-blocked
P–10–0385
08/30/10
08/13/10
(G) Phosphonic acid,
P,P
-[[(4-substitutedl)amino]methylene]bis-,potassium salt (1:1)
List of Subjects
Environmental Protection, Chemicals, Premanufacturer Notices.
Dated: September 16, 2010.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.