Office of Energy Efficiency and Renewable Energy, Department of Energy.
Final rule; correction.
On July 11, 2014, the U.S. Department of Energy published a final rule amending the test procedures for consumer water heaters and certain commercial water heaters. This correction addresses an error in one of the amendatory instructions for the regulatory text. Neither the error nor the correction in this document affects the substance of the rulemaking or any of the conclusions reached in support of the final rule.
Ms. Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Mailstop EE–5B, 1000 Independence Avenue SW., Washington, DC 20585–0121. Telephone: (202) 586–6590. Email:
Mr. Eric Stas, U.S. Department of Energy, Office of the General Counsel, GC–33, 1000 Independence Avenue SW., Washington, DC 20585–0121. Telephone: (202) 586–9507. Email:
The U.S. Department of Energy (DOE) published a final rule in the
On January 6, 2015, DOE published a final rule in the
The July 2014 final rule instruction to incorporate by reference ASTM D2156–09 at 10 CFR 430.3(h)(1) conflicts with the January 2015 final rule instruction to incorporate by reference ASTM D2156–09 at 10 CFR 430.3(i)(1). The instruction in the July 2014 final rule would be in error if implemented as written, because it would needlessly duplicate the incorporation by reference of ASTM D2156–09, which was already incorporated by reference by the January 2015 final rule.
Amendatory instruction 8 on page 40567 of the
In FR Doc. 2014–15656 appearing on page 40542 in the issue of Friday, July 11, 2014, the following correction is made:
On page 40567, second column, § 430.3, amendatory instruction 8, is corrected to read as follows (and the text for paragraph (h) is removed):