Legal Status
This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
- Documents
- Public Inspection
-
Publication Date
-
Section
-
Type
-
Topic
-
Agency
-
Airworthiness Directives; Airbus Helicopters
The FAA proposes to supersede Airworthiness Directive (AD) 2018-08-01 for Airbus Helicopters Model EC225LP helicopters. AD 2018- 08-01 requires inspecting the control rod attachment yokes (yoke) of certain main rotor rotating swashplates (swashplate). Since the FAA issued AD 2018-08-01, Airbus Helicopters has identified additional swashplate...
-
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
The FAA is revising an earlier proposal for certain Piper Aircraft, Inc. (Piper) Models PA-28-140, PA-28-150, PA-28-151, PA-28- 160, PA-28-161, PA-28-180, PA-28-181, PA-28-235, PA-28R-180, PA-28R- 200, PA-28R-201, PA-28R-201T, PA-28RT-201, PA-28RT-201T, PA-32-260, and PA-32-300 airplanes. The notice of proposed rulemaking (NPRM) was prompted by...
-
Airworthiness Directives; Honeywell International Inc. (Honeywell) Enhanced Ground Proximity Warning System (EGPWS)
The FAA is withdrawing a notice of proposed rulemaking (NPRM) that proposed to adopt a new airworthiness directive (AD) that would have applied to various normal and transport category rotorcraft with certain Honeywell enhanced ground proximity warning systems (EGPWS) installed. The NPRM was prompted by a software defect that prevents the EGPWS...
-
Airworthiness Directives; Leonardo S.p.A. Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for Leonardo S.p.A. Model AW169 and AW189 helicopters. This proposed AD was prompted by a report of a broken extrusion rubber window seal. This proposed AD would require installation of a reinforcement around the rubber filler wedge where the extrusion rubber window seal meets the...
-
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This proposed AD was prompted by a report that corrosion was found on the shock strut cylinders during unscheduled maintenance of the nose landing gear (NLG). This proposed AD would require a modification of the NLG shock strut...
-
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737 series airplanes, excluding Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of cracked or completely severed lugs in the upper aft corner stop fitting assembly of the forward entry door....