Restricting the Mailing of Replica or Inert Explosive Devices
Proposed Rule; Revised.
The Postal Service proposes to revise Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM®) to clarify that a proposed new standard to allow for the mailing of replica or inert explosive devices, such as grenades, be sent by Registered Mail TM only.
Table of Contents Back to Top
DATES: Back to Top
Submit comments on or before February 4, 2010.
ADDRESSES: Back to Top
Mail or deliver written comments to the Manager, Mailing Standards, U.S. Postal Service, 475 L'Enfant Plaza SW., Room 3436, Washington, DC 20260-3436. You may inspect and photocopy all written comments at USPS Headquarters Library, 475 L'Enfant Plaza SW., 11th Floor N, Washington, DC between 9 a.m. and 4 p.m., Monday through Friday. E-mail comments, containing the name and address of the commenter, may be sent to: MailingStandards@usps.gov, with a subject line of “Inert Munitions” Faxed comments are not accepted.
FOR FURTHER INFORMATION CONTACT: Back to Top
Mary J. Collins 202-268-5440 or Evans King, 202-268-4982.
SUPPLEMENTARY INFORMATION: Back to Top
The Postal Service published a Federal Register proposed rule (73 FR 12321) on March 7, 2008 to prohibit replica and inert munitions from the mail. Upon further review and in consideration of respondents' comments, we are revising our proposal to:
1. More specifically identify these items as “replica or inert explosive devices” rather than “replica or inert munitions” and,
2. Identify a process for mailing such items rather than prohibiting them from the mail altogether.
In the past, postal operations have been disrupted and facilities have been evacuated when replica or inert explosive devices have been discovered in the mail. Such evacuations result in unnecessary expense and loss of productivity to the Postal Service and can jeopardize USPS® service commitments. We believe this revised proposed rule will minimize the chances of operational disruptions caused by replica or inert explosive devices and at the same time allow mailers to continue to use the mail for shipping these items.
Comments Received Back to Top
All comments received in response to the original proposed rule were in opposition to the proposal, falling into four major categories. Comments are summarized and presented below followed by our responses:
Comment: The Postal Service proposal is vague and overly broad when identifying all replica or inert “munitions” as being prohibited from mailing.
The Postal Service agrees that the language in the rule could be more descriptive. We have, therefore, termed these articles as “inert or replica explosive devices” to distinguish them from inert munitions, such as empty shell casings and the like. In the revised proposed rule, replica or inert items that clearly look like a bomb or an explosive device, to an untrained observer, must be presented for mailing in accordance with the proposed standards in this document. This proposed rule is intended to discourage indiscriminate mailing of articles that appear to be explosive devices.
Comment: Respondents dispute whether there really is a problem of inert munitions in the mail.
In the past three years, the Postal Service has recorded numerous incidents involving the discovery of mail that exhibited characteristics of possible explosives. Postal facilities have been evacuated due to these occurrences. Postal Inspectors or local emergency first responders were contacted and required to respond to each of these occurrences.
Comment: The proposal is in violation of the Second Amendment.
We no longer propose to prohibit the mailing of items currently allowed by law to be mailed. In this revised proposed rule we are limiting the mailing of articles that have the appearance of real explosive devices. This revised proposed rule requires customers to present packages containing replica or inert explosive devices at a retail counter and that they be sent via Registered Mail. This process will ensure that packages containing these items remain separate and easily identifiable during the mailing process.
Comment: The Postal Service lacks the authority to ban mailing of this matter.
While the Postal Service does not necessarily agree with the legal arguments presented by certain respondents in response to its prior proposed rule, in reconsideration, we believe we can achieve the goal of reducing operational interruptions and maintaining the safety of the mail and postal employees by limiting the mailing process of replica or inert explosive devices rather than prohibiting them from being mailed.
Although we are exempt from the notice and comment requirements of the Administrative Procedure Act (5 U.S.C. of 553 (b), (c)] regarding proposed rulemaking by 39 U.S.C. 410(a), we invite public comments on the following proposed revisions to Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM), incorporated by reference in the Code of Federal Regulations. See 39 CFR 111.1.
- Administrative practice and procedure
- Postal Service
Accordingly, 39 CFR part 111 is proposed to be amended as follows:
PART 111—[AMENDED] Back to Top
1. The authority citation for 39 CFR part 111 continues to read as follows:
2. Revise the following sections of Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM) as follows:
* * * * *
600Basic Standards for All Mailing Services Back to Top
601Mailability Back to Top
* * * * *
11.0Other Restricted and Nonmailable Matter Back to Top
* * * * *
11.5Replica or Inert Explosive Devices Back to Top
[Renumber current 11.5 through 11.20 as 11.6 through 11.21. Insert new 11.5 to read as follows:]
Replica or inert devices that bear a realistic appearance to explosive devices such as simulated grenades, but that are not dangerous, are permitted in the mail when all of the following conditions are met:
a. The package is presented by the mailer at a retail counter.
b. Registered Mail is used. Registered Mail service is only available for items mailed as either First-Class Mail or Priority Mail.
c. The address side of the package is labeled with “REPLICA EXPLOSIVE” using at least 20 point type or letters at least1/4″ high.
* * * * *
We will publish an appropriate amendment to 39 CFR part 111 to reflect these changes if our proposal is adopted.
Neva R. Watson,
[FR Doc. E9-31218 Filed 1-4-10; 8:45 am]
BILLING CODE 7710-12-P