Skip to Content
Notice

Certain Small Diameter Seamless Carbon and Alloy Standard, Line, and Pressure Pipe From Germany: Final Results of the Expedited Third Sunset Review of the Antidumping Duty Order

Summary

On April 2, 2012, the Department of Commerce (the Department) initiated the third sunset review of the antidumping duty order on certain small diameter seamless carbon and alloy steel standard, line, and pressure pipe (seamless pipe) from Germany pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). See Initiation of Five-Year (“Sunset”) Review, 77 FR 19643 (April 2, 2012) (Sunset Initiation). On the basis of a notice of intent to participate and an adequate substantive response filed on behalf of a domestic interested party, and no response from a respondent interested party, the Department conducted an expedited (120-day) sunset review. As a result of this sunset review, the Department finds that revocation of the antidumping duty order would likely lead to the continuation or recurrence of dumping. The magnitude of dumping likely to prevail if the order were revoked is identified in the “Final Results of Review” section of this notice.

 

Table of Contents Back to Top

DATES: Back to Top

Effective Date: August 3, 2012.

FOR FURTHER INFORMATION CONTACT: Back to Top

Ericka Ukrow or Angelica Mendoza, AD/CVD Operations, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-0405 or (202) 482-3019, respectively.

SUPPLEMENTARY INFORMATION: Back to Top

Background Back to Top

On April 2, 2012, the Department initiated the sunset review of the antidumping duty order on seamless pipe from Germany pursuant to section 751(c) of the Act. See Sunset Initiation. The Department received a notice of intent to participate from one domestic interested party, United States Steel Corporation (U.S. Steel), within the deadline specified in 19 CFR 351.218(d)(1)(i). The domestic interested party claimed interested party status under section 771(9)(C) of the Act as a U.S. producer of a domestic like product. We received a complete substantive response from the domestic interested party within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i) on May 2, 2012. No respondent interested parties submitted responses. As a result of the timely filed, substantive response from the domestic interested party the Department conducted an expedited sunset review of the order, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2).

Scope of the Order Back to Top

The scope of the order includes small diameter seamless carbon and alloy standard, line and pressure pipes (seamless pipes) produced to the ASTM A-335, ASTM A-106, ASTM A-53 and API 5L specifications and meeting the physical parameters described below, regardless of application. The scope of the order also includes all products used in standard, line, or pressure pipe applications and meeting the physical parameters below, regardless of specification.

For purposes of the order, seamless pipes are seamless carbon and alloy (other than stainless) steel pipes, of circular cross-section, not more than 114.3 mm (4.5 inches) in outside diameter, regardless of wall thickness, manufacturing process (hot-finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish. These pipes are commonly known as standard pipe, line pipe or pressure pipe, depending upon the application. They may also be used in structural applications. Pipes produced in non-standard wall thicknesses are commonly referred to as tubes.

The seamless pipes subject to the order are currently classifiable under subheadings 7304.19.10.20, 7304.19.50.20, 7304.31.60.50, 7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the Harmonized Tariff Schedule of the United States (HTSUS).

The following information further defines the scope of the order, which covers pipes meeting the physical parameters described above:

Specifications, Characteristics and Uses: Seamless pressure pipes are intended for the conveyance of water, steam, petrochemicals, chemicals, oil products, natural gas and other liquids and gasses in industrial piping systems. They may carry these substances at elevated pressures and temperatures and may be subject to the application of external heat. Seamless carbon steel pressure pipe meeting the American Society for Testing and Materials (ASTM) standard A-106 may be used in temperatures of up to 1000 degrees Fahrenheit, at various American Society of Mechanical Engineers (ASME) code stress levels. Alloy pipes made to ASTM standard A-335 must be used if temperatures and stress levels exceed those allowed for A-106 and the ASME codes. Seamless pressure pipes sold in the United States are commonly produced to the ASTM A-106 standard.

Seamless standard pipes are most commonly produced to the ASTM A-53 specification and generally are not intended for high temperature service. They are intended for the low temperature and pressure conveyance of water, steam, natural gas, air and other liquids and gasses in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipes (depending on type and code) may carry liquids at elevated temperatures but must not exceed relevant ASME code requirements.

Seamless line pipes are intended for the conveyance of oil and natural gas or other fluids in pipe lines. Seamless line pipes are produced to the API 5L specification.

Seamless pipes are commonly produced and certified to meet ASTM A-106, ASTM A-53 and API 5L specifications. Such triple certification of pipes is common because all pipes meeting the stringent A-106 specification necessarily meet the API 5L and ASTM A-53 specifications. Pipes meeting the API 5L specification necessarily meet the ASTM A-53 specification. However, pipes meeting the A-53 or API 5L specifications do not necessarily meet the A-106 specification. To avoid maintaining separate production runs and separate inventories, manufacturers triple certify the pipes. Since distributors sell the vast majority of this product, they can thereby maintain a single inventory to service all customers.

The primary application of ASTM A-106 pressure pipes and triple certified pipes is in pressure piping systems by refineries, petrochemical plants and chemical plants. Other applications are in power generation plants (electrical-fossil fuel or nuclear), and in some oil field uses (on shore and off shore) such as for separator lines, gathering lines and metering runs. A minor application of this product is for use as oil and gas distribution lines for commercial applications. These applications constitute the majority of the market for the subject seamless pipes. However, A-106 pipes may be used in some boiler applications.

The scope of the order includes all seamless pipe meeting the physical parameters described above and produced to one of the specifications listed above, regardless of application, and whether or not also certified to a non-covered specification. Standard, line and pressure applications and the above-listed specifications are defining characteristics of the scope of the order. Therefore, seamless pipes meeting the physical description above, but not produced to the A-335, A-106, A-53, or API 5L standards shall be covered if used in a standard, line or pressure application.

For example, there are certain other ASTM specifications of pipe which, because of overlapping characteristics, could potentially be used in A-106 applications. These specifications generally include A-162, A-192, A-210, A-333, and A-524. When such pipes are used in a standard, line or pressure pipe application, such products are covered by the scope of the order.

Specifically excluded from the order are boiler tubing and mechanical tubing, if such products are not produced to A-335, A-106, A-53 or API 5L specifications and are not used in standard, line or pressure applications. In addition, finished and unfinished oil country tubular goods (OCTG) are excluded from the scope of the order, if covered by the scope of another antidumping duty order from the same country. If not covered by such an OCTG order, finished and unfinished OCTG are included in the scope when used in standard, line or pressure applications. Finally, also excluded from the order are redraw hollows for cold-drawing when used in the production of cold-drawn pipe or tube.

Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of the order is dispositive.

Analysis of Comments Received Back to Top

All issues raised in this case are addressed in the “Issues and Decision Memorandum” from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Import Administration, dated concurrently with this notice (Decision Memorandum), which is hereby adopted by this notice. The issues discussed in the Decision Memorandum include the likelihood of continuation or recurrence of dumping and the magnitude of the margin likely to prevail if the order were revoked. Parties can find a complete discussion of all issues raised in this sunset review and the corresponding recommendations in this public memorandum, which is on file electronically via IA ACCESS in the Central Records Unit, Room 7046, of the main Department of Commerce building.

In addition, a complete version of the Decision Memorandum can be accessed directly on the Web at http://ia.ita.doc.gov/frn. The paper copy and electronic versions of the Decision Memorandum are identical in content.

Final Results of Review Back to Top

The Department determines that revocation of the antidumping duty order on seamless pipe from Germany would likely lead to continuation or recurrence of dumping. Further, the Department finds that the magnitude of dumping likely to prevail if the order was revoked is 57.72 percent for Mannesmannrohren Werke AG and for all other German producers and exporters of subject merchandise.

Notification Back to Top

This notice also serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

The Department is issuing and publishing the results and notice in accordance with sections 751(c), 752(c), and 777(i)(1) of the Act.

Dated: July 26, 2012.

Paul Piquado,

Assistant Secretary for Import Administration.

[FR Doc. 2012-19069 Filed 8-2-12; 8:45 am]

BILLING CODE 3510-DS-P

Site Feedback