Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety
Notice Of Regulatory Review; Request For Comments.
NHTSA seeks comments on the economic impact of its regulations on small entities. As required by Section 610 of the Regulatory Flexibility Act, we are attempting to identify rules that may have a significant economic impact on a substantial number of small entities. We also request comments on ways to make these regulations easier to read and understand. The focus of this notice is rules that specifically relate to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle equipment.
Table of Contents Back to Top
- FOR FURTHER INFORMATION CONTACT:
- SUPPLEMENTARY INFORMATION:
- I. Section 610 of the Regulatory Flexibility Act
- A. Background and Purpose
- B. Review Schedule
- C. Regulations Under Analysis
- II. Plain Language
- A. Background and Purpose
- B. Review Schedule
- How do I prepare and submit comments?
- How can I be sure that my comments were received?
- How do I submit confidential business information?
- Will the agency consider late comments?
- How can I read the comments submitted by other people?
Tables Back to Top
DATES: Back to Top
You should submit comments early enough to ensure that Docket Management receives them not later than January 22, 2013.
ADDRESSES: Back to Top
You may submit comments [identified by DOT Docket ID Number NHTSA-2012-0155] by any of the following methods:
- Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the online instructions for submitting comments.
- Mail: Docket Management Facility: U.S. Department of Transportation, 1200 New Jersey Avenue SE., West Building Ground Floor, Room W12-140, Washington, DC 20590-0001.
- Hand Delivery or Courier: West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., between 9 a.m. and 5 p.m. ET, Monday through Friday, except Federal holidays.
- Fax: 202-493-2251.
Instructions: For detailed instructions on submitting comments and additional information see the Comments heading of the Supplementary Information section of this document. Note that all comments received will be posted without change to http://www.regulations.gov, including any personal information provided. Please see the Privacy Act heading below.
Privacy Act: Anyone is able to search the electronic form of all comments received into any of our dockets by the name of the individual submitting the comment (or signing the comment, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's complete Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477-78) or you may visit http://DocketsInfo.dot.gov.
FOR FURTHER INFORMATION CONTACT: Back to Top
Juanita Kavalauskas, Office of Regulatory Analysis, Office of Regulatory Analysis and Evaluation, National Highway Traffic Safety Administration, U.S. Department of Transportation, 1200 New Jersey Avenue SE., Washington, DC 20590 (telephone 202-366-2584, fax 202-366-3189).
SUPPLEMENTARY INFORMATION: Back to Top
I. Section 610 of the Regulatory Flexibility Act Back to Top
A. Background and Purpose
Section 610 of the Regulatory Flexibility Act of 1980 (96), as amended by the Small Business Regulatory Enforcement Fairness Act of 1996 (Pub. L. 104-121), requires agencies to conduct periodic reviews of final rules that have a significant economic impact on a substantial number of small business entities. The purpose of the reviews is to determine whether such rules should be continued without change, or should be amended or rescinded, consistent with the objectives of applicable statutes, to minimize any significant economic impact of the rules on a substantial number of such small entities.
B. Review Schedule
The Department of Transportation (DOT) published its Semiannual Regulatory Agenda on November 22, 1999, listing in Appendix D (64 FR 64684) those regulations that each operating administration will review under section 610 during the next 12 months. Appendix D contained DOT's 10-year review plan for all of its existing regulations. On November 24, 2008, NHTSA published in the Federal Register (73 FR 71401) a revised 10-year review plan for its existing regulations.
The National Highway Traffic Safety Administration (NHTSA, “we”) has divided its rules into 10 groups by subject area. Each group will be reviewed once every 10 years, undergoing a two-stage process—an Analysis Year and a Review Year. For purposes of these reviews, a year will coincide with the fall-to-fall publication schedule of the Semiannual Regulatory Agenda. The newly revised 10-year plan will assess years 9 and 10 of the old plan in years 1 and 2 of the new plan. Year 1 (2008) began in the fall of 2008 and will end in the fall of 2009; Year 2 (2009) will begin in the fall of 2009 and will end in the fall of 2010; and so on.
During the Analysis Year, we will request public comment on and analyze each of the rules in a given year's group to determine whether any rule has a significant impact on a substantial number of small entities and, thus, requires review in accordance with section 610 of the Regulatory Flexibility Act. In each fall's Regulatory Agenda, we will publish the results of the analyses we completed during the previous year. For rules that have subparts, or other discrete sections of rules that do have a significant impact on a substantial number of small entities, we will announce that we will be conducting a formal section 610 review during the following 12 months.
The section 610 review will determine whether a specific rule should be revised or revoked to lessen its impact on small entities. We will consider: (1) The continued need for the rule; (2) the nature of complaints or comments received from the public; (3) the complexity of the rule; (4) the extent to which the rule overlaps, duplicates, or conflicts with other federal rules or with state or local government rules; and (5) the length of time since the rule has been evaluated or the degree to which technology, economic conditions, or other factors have changed in the area affected by the rule. At the end of the Review Year, we will publish the results of our review. The following table shows the 10-year analysis and review schedule:
|Year||Regulations to be reviewed||Analysis year||Review year|
|1||49 CFR 571.223 through 571.500, and parts 575 and 579||2008||2009|
|2||23 CFR parts 1200 and 1300||2009||2010|
|3||49 CFR parts 501 through 526 and 571.213||2010||2011|
|4||49 CFR 571.131, 571.217, 571.220, 571.221, and 571.222||2011||2012|
|5||49 CFR 571.101 through 571.110, and 571.135, 571.138 and 571.139||2012||2013|
|6||49 CFR parts 529 through 578, except parts 571 and 575||2013||2014|
|7||49 CFR 571.111 through 571.129 and parts 580 through 588||2014||2015|
|8||49 CFR 571.201 through 571.212||2015||2016|
|9||49 CFR 571.214 through 571.219, except 571.217||2016||2017|
|10||49 CFR parts 591 through 595 and new parts and subparts||2017||2018|
C. Regulations Under Analysis
During Year 5, we will continue to conduct a preliminary assessment of the following: 49 CFR 571.101 through 571.110, and 571.135, 571.138 and 571.139.
|571.101||Controls and displays.|
|571.102||Transmission shift position sequence, starter interlock, and transmission braking effect.|
|571.103||Windshield defrosting and defogging systems.|
|571.104||Windshield wiping and washing systems.|
|571.105||Hydraulic and electric brake systems.|
|571.108||Lamps, reflective devices, and associated equipment.|
|571.109||New pneumatic and certain specialty tires.|
|571.110||Tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less.|
|571.135||Light vehicle brake systems.|
|571.138||Tire pressure monitoring systems.|
|571.139||New pneumatic radial tires for light vehicles.|
We are seeking comments on whether any requirements in 49 CFR 571.101 through 571.110, and 571.135, 571.138 and 571.139 have a significant economic impact on a substantial number of small entities. “Small entities” include small businesses, not-for-profit organizations that are independently owned and operated and are not dominant in their fields, and governmental jurisdictions with populations under 50,000. Business entities are generally defined as small businesses by Standard Industrial Classification (SIC) code, for the purposes of receiving Small Business Administration (SBA) assistance. Size standards established by SBA in 13 CFR 121.201 are expressed either in number of employees or annual receipts in millions of dollars, unless otherwise specified. The number of employees or annual receipts indicates the maximum allowed for a concern and its affiliates to be considered small. If your business or organization is a small entity and if any of the requirements in 49 CFR 571.101 through 571.110, and 571.135, 571.138 and 571.139 have a significant economic impact on your business or organization, please submit a comment to explain how and to what degree these rules affect you, the extent of the economic impact on your business or organization, and why you believe the economic impact is significant.
If the agency determines that there is a significant economic impact on a substantial number of small entities, it will ask for comment in a subsequent notice during the Review Year on how these impacts could be reduced without reducing safety.
II. Plain Language Back to Top
A. Background and Purpose
Executive Order 12866 and the President's memorandum of June 1, 1998, require each agency to write all rules in plain language. Application of the principles of plain language includes consideration of the following questions:
- Have we organized the material to suit the public's needs?
- Are the requirements in the rule clearly stated?
- Does the rule contain technical language or jargon that is not clear?
- Would a different format (grouping and order of sections, use of headings, paragraphing) make the rule easier to understand?
- Would more (but shorter) sections be better?
- Could we improve clarity by adding tables, lists, or diagrams?
- What else could we do to make the rule easier to understand?
If you have any responses to these questions, please include them in your comments on this document.
B. Review Schedule
In conjunction with our section 610 reviews, we will be performing plain language reviews over a ten-year period on a schedule consistent with the section 610 review schedule. We will review 49 CFR 571.101 through 571.110, and 571.135, 571.138 and 571.139 to determine if these regulations can be reorganized and/or rewritten to make them easier to read, understand, and use. We encourage interested persons to submit draft regulatory language that clearly and simply communicates regulatory requirements, and other recommendations, such as for putting information in tables that may make the regulations easier to use.
Comments Back to Top
How do I prepare and submit comments?
Your comments must be written and in English. To ensure that your comments are correctly filed in the Docket, please include the docket number of this document in your comments.
Your comments must not be more than 15 pages long. (49 CFR 553.21.) We established this limit to encourage you to write your primary comments in a concise fashion. However, you may attach necessary additional documents to your comments. There is no limit on the length of the attachments.
Please submit two copies of your comments, including the attachments, to Docket Management at the address given above under ADDRESSES.
Please note that pursuant to the Data Quality Act, in order for substantive data to be relied upon and used by the agency, it must meet the information quality standards set forth in the OMB and DOT Data Quality Act guidelines. Accordingly, we encourage you to consult the guidelines in preparing your comments. OMB's guidelines may be accessed at http://www.whitehouse.gov/omb/fedreg/reproducible.html. DOT's guidelines may be accessed at http://dmses.dot.gov/submit/DataQualityGuidelines.pdf.
How can I be sure that my comments were received?
If you wish Docket Management to notify you upon its receipt of your comments, enclose a self-addressed, stamped postcard in the envelope containing your comments. Upon receiving your comments, Docket Management will return the postcard by mail.
How do I submit confidential business information?
If you wish to submit any information under a claim of confidentiality, you should submit three copies of your complete submission, including the information you claim to be confidential business information, to the Chief Counsel, NHTSA, U.S. Department of Transportation, 1200 New Jersey Avenue SE., Washington, DC 20590. In addition, you should submit two copies, from which you have deleted the claimed confidential business information, to Docket Management at the address given above under ADDRESSES. When you send a comment containing information claimed to be confidential business information, you should include a cover letter setting forth the information specified in our confidential business information regulation. (49 CFR part 512.)
Will the agency consider late comments?
We will consider all comments that Docket Management receives before the close of business on the comment closing date indicated above under DATES. To the extent possible, we will also consider comments that Docket Management receives after that date.
How can I read the comments submitted by other people?
You may read the comments received by Docket Management at the address given above under ADDRESSES. The hours of the Docket are indicated above in the same location.
You may also see the comments on the Internet. To read the comments on the Internet, take the following steps:
(1) Go to the Federal Docket Management System (FDMS) at http://regulations.gov.
(2) FDMS provides two basic methods of searching to retrieve dockets and docket materials that are available in the system: (a) “Quick Search” to search using a full-text search engine, or (b) “Advanced Search,” which displays various indexed fields such as the docket name, docket identification number, phase of the action, initiating office, date of issuance, document title, document identification number, type of document, Federal Register reference, CFR citation, etc. Each data field in the advanced search may be searched independently or in combination with other fields, as desired. Each search yields a simultaneous display of all available information found in FDMS that is relevant to the requested subject or topic.
(3) You may download the comments. However, since the comments are imaged documents, instead of word processing documents, the “pdf” versions of the documents are word searchable.
Please note that even after the comment closing date, we will continue to file relevant information in the Docket as it becomes available. Further, some people may submit late comments. Accordingly, we recommend that you periodically check the Docket for new material.
Associate Administrator for the National Center for Statistics and Analysis.
[FR Doc. 2012-28103 Filed 11-19-12; 8:45 am]
BILLING CODE 4910-59-P