Skip to Content

Notice

Railroad Safety Advisory Committee (“RSAC”); Working Group Activity Update

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Railroad Administration (FRA), Department of Transportation (DOT).

ACTION:

Announcement of Railroad Safety Advisory Committee (RSAC) Working Group Activities.

SUMMARY:

FRA is updating its announcement of RSAC's working group activities to reflect the current status of working group activities.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Trish Paolella, RSAC Coordinator, FRA, 1120 Vermont Ave, N.W., Mailstop 25, Washington, D.C. 20590, (202) 493-6212 or Grady Cothen, Deputy Associate Administrator for Safety Standards Program Development, FRA, 1120 Vermont Ave, N.W., Mailstop 25, Washington, D.C. 20590, (202) 493-6302.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

This notice serves to update FRA's last announcement of working group activities and status reports on December 17, 1999 (64 FR 70756). The thirteenth full Committee meeting was held January 28, 2000. The next meeting of the full Committee is scheduled for May 19, 2000 at the Madison Hotel in Washington, D.C.

Since its first meeting in April of 1996, the RSAC has accepted sixteen tasks. Status for each of the tasks is provided below:

Task 96-1—Revising the Freight Power Brake Regulations. This Task was formally withdrawn from the RSAC on June 24, 1997. FRA published an NPRM on September 9, 1998, reflective of what FRA had learned through the collaborative process. Two public hearings were conducted and a technical conference was held. The date for submission of written comments was extended to March 1, 1999. FRA is preparing a final rule. Contact: Thomas Hermann (202) 493-6036.

Task 96-2—Reviewing and recommending revisions to the Track Safety Standards (49 CFR Part 213). This task was accepted April 2, 1996, and a Working Group was established. Consensus was reached on recommended revisions and an NPRM incorporating these recommendations was published in the Federal Register on July 3, 1997, (62 FR 36138). The final rule was published in the Federal Register on June 22, 1998 (63 FR 33991). The effective date of the rule was September 21, 1998. A task force was established to address Gage Restraint Measurement System (GRMS) technology applicability to the Track Safety Standards. A GRMS amendment to the Track Safety Standards is being prepared for presentation to the RSAC. Contact: Al MacDowell (202) 493-6236.

Task 96-3—Reviewing and recommending revisions to the Radio Standards and Procedures (49 CFR Part 220). This Task was accepted on April 2, 1996, and a Working Group was established. Consensus was reached on recommended revisions and an NPRM incorporating these recommendations was published in the Federal Register on June 26, 1997 ( 62 FR 34544). The final rule was published on September 4, 1998 (63 FR 47182), and was effective on January 2, 1999. Contact: Gene Cox (202) 493-6319.

Task 96-4—Reviewing the appropriateness of the agency's current policy regarding the applicability of existing and proposed regulations to tourist, excursion, scenic, and historic railroads. This Task was accepted on April 2, 1996, and a Working Group was established. The Working Group monitored the steam locomotive regulations task. Contact: Grady Cothen (202) 493-6302.

Task 96-5—Reviewing and recommending revisions to Steam Locomotive Inspection Standards (49 CFR Part 230). This Task was assigned to the Tourist and Historic Working Group on July 24, 1996. Consensus was reached and an NPRM was published on September 25, 1998 (63 FR 51404). A public hearing was held on February 4, 1999, and recommendations were developed in response to comments received. The final rule was published on November 17, 1999 (64 FR 62828). Contact: George Scerbo (202) 493-6349.

Task 96-6—Reviewing and recommending revisions to miscellaneous aspects of the regulations addressing Locomotive Engineer Certification (49 CFR Part 240). This Task was accepted on October 31, 1996, and a Working Group was established. Consensus was reached and an NPRM was published on September 22, 1998. The Working Group met to resolve issues presented in public comments. The RSAC recommended issuance of a final rule with the Working Group modifications. The final rule was published November 8, 1999 (64 FR 60966). Contact: John Conklin (202) 493-6318.

Task 96-7—Developing On-Track Equipment Safety Standards. This task was assigned to the existing Track Standards Working Group on October 31, 1996, and a Task Force was established. The Task Force is finalizing a proposed rule to present to the RSAC for consideration. Contact: Al MacDowell (202) 493-6236.

Task 96-8—This Planning Task evaluated the need for action responsive to recommendations contained in a report to Congress entitled, Locomotive Crashworthiness & Working Conditions. This Planning Task was accepted on October 31, 1996. A Planning Group was formed and reviewed the report, grouping issues into categories.

Task 97-1—Developing crashworthiness specifications to promote the integrity of the locomotive cab in accidents resulting from collisions. This Task was accepted on Start Printed Page 31058June 24, 1997. A Task Force on engineering issues was established by the Working Group on Locomotive Crashworthiness to review collision history and design options and additional research was commissioned. The Working Group reviewed results of the research and is drafting standards for freight and passenger locomotives to present to the RSAC for consideration. Contact: Sean Mehrvazi (202) 493-6237.

Task 97-2—Evaluating the extent to which environmental, sanitary, and other working conditions in locomotive cabs affect the crew's health and the safe operation of locomotives, proposing standards where appropriate. This Task was accepted June 24, 1997. A draft sanitation NPRM is under review by the Working Group on Cab Working Conditions. Task forces on noise and temperature were formed to identify and address issues. The Noise Task Force is preparing draft recommendations for noise exposure requirements. Contact: Brenda Hattery (202) 493-6326.

Task 97-3—Developing event recorder data survivability standards. This Task was accepted on June 24, 1997. An Event Recorder Working Group and Task Force have been established and are actively meeting. A draft proposed rule is being reviewed. Contact: Edward English (202) 493-6321.

Task 97-4 and Task 97-5—Defining Positive Train Control (PTC) functionalities, describing available technologies, evaluating costs and benefits of potential systems, and considering implementation opportunities and challenges, including demonstration and deployment.

Task 97-6—Revising various regulations to address the safety implications of processor-based signal and train control technologies, including communications-based operating systems. These three tasks were accepted on September 30, 1997, and assigned to a single Working Group. A Data and Implementation Task Force, formed to address issues such as assessment of costs and benefits and technical readiness, completed a report on the future of PTC systems. The report was accepted as RSAC's Report to the Administrator at the September 8, 1999, meeting. The Standards Task Force, formed to develop PTC standards, is developing draft recommendations for performance-based standards for processor-based signal and train control standards for presentation to the RSAC. Contact: Grady Cothen (202) 493-6302.

Task 97-7—Determining damages qualifying an event as a reportable train accident. This Task was accepted on September 30, 1997. A working group was formed to address this task and conducted their initial meeting February 8, 1999. Contact: Robert Finkelstein (202) 493-6280.

Task 00-1—Determining the need to amend regulations protecting persons who work on, under, or between rolling equipment and persons applying, removing or inspecting rear end marking devices. A working group is being formed. Contact: Tom Keane (202) 493-6234.

Please refer to the notice published in the Federal Register on March 11, 1996 (61 FR 9740) for more information about the RSAC.

Start Signature

Issued in Washington, D.C. on May 9, 2000.

George Gavalla,

Associate Administrator for Safety.

End Signature End Supplemental Information

[FR Doc. 00-12111 Filed 5-12-00; 8:45 am]

BILLING CODE 4910-06-P