Notice of Application to Amend an Export Trade Certificate of Review.
The Office of Export Trading Company Affairs (“OETCA”), International Trade Administration, Department of Commerce, has received an application to amend an Export Start Printed Page 56534Trade Certificate of Review (“Certificate”). This notice summarizes the proposed amendment and requests comments relevant to whether the Certificate should be issued.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Morton Schnabel, Director, Office of Export Trading Company Affairs, International Trade Administration, (202) 482-5131 (this is not a toll-free number) or E-mail at firstname.lastname@example.org.End Further Info End Preamble Start Supplemental Information
Title III of the Export Trading Company Act of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to issue Export Trade Certificates of Review. An Export Trade Certificate of Review protects the holder and the members identified in the Certificate from state and federal government antitrust actions and from private treble damage antitrust actions for the export conduct specified in the Certificate and carried out in compliance with its terms and conditions. Section 302(b)(1) of the Export Trading Company Act of 1982 and 15 CFR 325.6(a) require the Secretary to publish a notice in the Federal Register identifying the applicant and summarizing its proposed export conduct.
Request for Public Comments
Interested parties may submit written comments relevant to the determination whether an amended Certificate should be issued. If the comments include any privileged or confidential business information, it must be clearly marked and a nonconfidential version of the comments (identified as such) should be included. Any comments not marked privileged or confidential business information will be deemed to be nonconfidential. An original and five (5) copies, plus two (2) copies of the nonconfidential version, should be submitted no later than 20 days after the date of this notice to: Office of Export Trading Company Affairs, International Trade Administration, Department of Commerce, Room 1104H, Washington, D.C. 20230. Information submitted by any person is exempt from disclosure under the Freedom of Information Act (5 U.S.C. 552). However, nonconfidential versions of the comments will be made available to the applicant if necessary for determining whether or not to issue the Certificate. Comments should refer to this application as “Export Trade Certificate of Review, application number 87-15A04.”
The Association for Manufacturing Technology's (“AMT”) original Certificate was issued on May 19, 1987 (52 FR 19371, May 22, 1987) and previously amended on December 11, 1987 (52 FR 48454, December 22, 1987); January 3, 1989 (54 FR 837, January 10, 1989); April 20, 1989 (54 FR 19427, May 5, 1989); May 31, 1989 (54 FR 24931, June 12, 1989); May 29, 1990 (55 FR 23576, June 11, 1990); June 7, 1991 (56 FR 28140, June 19, 1991); November 27, 1991 (56 FR 63932, December 6, 1991); July 20, 1992 (57 FR 33319, July 28, 1992); May 10, 1994 (59 FR 25614, May 17, 1994); December 1, 1995 (61 FR 13152, March 26, 1996); October 11, 1996 (61 FR 55616, October 28, 1996); May 6, 1998 (63 FR 31738, June 10, 1998); November 10, 1998 (63 FR 63909, November 17, 1998); and October 29, 1999 (64 FR 61276, November 10, 1999). A summary of the application for an amendment follows.
Summary of the Application
Applicant: AMT—The Association For Manufacturing Technology 7901 Westpark Drive, McLean, Virginia, 22102-4269.
Contact: Cara E. Maggioni, Attorney, Telephone: (202) 662-5162.
Application No.: 87-15A04.
Date Deemed Submitted: September 7, 2000.
Proposed Amendment: AMT seeks to amend its Certificate to:
1. Add each of the following companies as a new “Member” of the Certificate within the meaning of section 325.2(1) of the Regulations (15 CFR 325.2(1)): Merritech, Inc., Saginaw, Michigan; Mega Manufacturing, Inc., for the activities of its Piranha Division, Hutchinson, Kansas; New Nine, Inc., d/b/a GWI Engineering, Grand Rapids, Michigan; New Monarch Machine Tool Company, Cortland, New York; W.A. Whitney Co., Rockford, Illinois (controlling entity: Esterline Technologies, Bellevue, Washington); Evana Automation, Inc., Evansville, Indiana (controlling entity: Phillips Service Industries, Inc., Livonia, Michigan); Compact Manufacturing Systems, Santa Ana, California; ABB Flexible Automation, Inc., New Berlin, Wisconsin (controlling entity: Asea Brown Boveri Inc., Norwalk, Connecticut); and Welduction Corporation, Novi, Michigan (controlling entity: INDUCTOHEAT, Inc., Madison Heights, Michigan);
2. Delete the following companies as “Members” of the Certificate: Bramac Machine Tool Co.; Wysong & Miles Company; DeVlieg-Bullard Services Group, Inc.; Defiance Machine & Tool Co.; Dyna Mechtronics Inc.; and Easco Sparcatron; and
3. Change the two existing Members' names as follows: “Process Control Automation, Inc.” is changed to “Hayes-Lemmerz Process Control Automation, Inc.” and “Giddings & Lewis, Inc.” is changed to “Gilman Engineering & Manufacturing Co.”Start Signature
Dated: September 13, 2000.
Director, Office of Export Trading Company Affairs.
[FR Doc. 00-23961 Filed 9-18-00; 8:45 am]
BILLING CODE 3510-DR-P