An application has been submitted to the Foreign-Trade Zones Board (the Board) by the Triangle J Council of Governments, grantee of FTZ 93, pursuant to § 400.32(b)(1) of the Board's regulations (15 CFR Part 400), requesting on behalf of Merck & Co., Inc. (Merck), to add capacity and to expand the scope of manufacturing authority under zone procedures at Subzone 93C, the Merck pharmaceutical plant in Wilson County, North Carolina. It was formally filed on November 17, 2000.
Subzone 93C was approved by the Board in 1994 at a single site (225 acres, 257,576 sq. ft., 7 bldgs.) located at 4633 Merck Road, near the intersection of I-95 and U.S. Hwy. 264, in the town of Wilson (Wilson County), North Carolina, some 40 miles east of Durham. The facility (605 employees) is used to produce a range of human health products. Merck is now proposing to add 1 building and expand existing buildings. The proposed subzone would Start Printed Page 71298then include 8 bldgs. consisting of 609,927 sq. ft. (a 237% increase) on 225 acres.
The application also requests to expand the scope of authority for manufacturing activity conducted under FTZ procedures at Subzone 93C to include additional general categories of inputs that have recently been approved by the Board for other pharmaceutical plants. They include chemically pure sugars, empty capsules for pharmaceutical use, protein concentrates, natural magnesium phosphates and carbonates, gypsum, anhydrite and plasters, petroleum jelly, paraffin and waxes, sulfuric acid, other inorganic acids or compounds of nonmetals, ammonia, zinc oxide, titanium oxides, fluorides, chlorates, sulfates, salts of oxometallic acids, radioactive chemical elements, compounds of rare earth metals, acyclic hydrocarbons, derivatives of phenols or peroxides, acetals and hemiacetals, phosphoric esters and their salts, diazo-compounds, glands for therapeutic uses, wadding, gauze and bandages, pharmaceutical glaze, hair preparations, lubricating preparations, albumins, prepared glues and adhesives, catalytic preparations, diagnostic or laboratory reagents, prepared binders, acrylic polymers, self-adhesive plates and sheets, other articles of vulcanized rubber, plastic cases, cartons, boxes, printed books, brochures and similar printed matter, carboys, bottles, and flasks, stoppers, caps, and lids, aluminum foil, tin plates and sheets, taps, cocks and valves, and medical instruments and appliances.
FTZ procedures would exempt Merck from Customs duty payments on the foreign components used in export activity. On its domestic sales, the company would be able to elect the duty rates that applies to finished products (primarily duty-free for finished pharmaceuticals and up to 14.6% for intermediates) for the foreign materials noted above (duty rates ranging from duty-free to 14.5%). The application indicates that the expanded use of FTZ procedures will help improve Merck's international competitiveness.
The application has requested review under § 400.32(b)(1) of the FTZ Board regulations on the basis that the proposed activity is the same, in terms of products involved, to activity recently approved by the Board and similar in circumstances.
Public comment on the application is invited from interested parties. Submissions (original and three copies) shall be addressed to the Board's Executive Secretary at the address below. The closing period for their receipt is January 2, 2001. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period (to January 16, 2001).
Copies of the applications will be available for public inspection at the following locations:
U.S. Department of Commerce, Export Assistance Center, 333 Fayetteville St., Suite 1150, Raleigh, NC 27601
Office of the Executive Secretary, Foreign-Trade Zones Board, Room 4008, U.S. Department of Commerce, 14th Street & Pennsylvania Avenue, NW, Washington, DC 20230Start Signature
Dated: November 17, 2000.
[FR Doc. 00-30564 Filed 11-29-00; 8:45 am]
BILLING CODE 3510-DS-P