Skip to Content

Notice

Export Trade Certificate of Review

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

ACTION:

Notice of issuance of an amended Export Trade Certificate of Review, Application No. 88-4A012.

SUMMARY:

The Department of Commerce has issued an amendment to the Export Trade Certificate of Review granted to The National Tooling and Machining Association (“NTMA”) on April 5, 2001. Notice of issuance of the original Certificate was published in the Federal Register on October 25, 1988 (53 FR 43140).

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Vanessa M. Bachman, Acting Director, Office of Export Trading Company Affairs, International Trade Administration, (202) 482-5131. This is not a toll-free number.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Title III of the Export Trading Company Act of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to issue Export Trade Certificates of Review. The regulations implementing Title III are found at 15 CFR part 325 (2000).

The Office of Export Trading Company Affairs (“OETCA”) is issuing this notice pursuant to 15 CFR 325.6(b), which requires the Department of Commerce to publish a summary of a Certificate in the Federal Register. Under Section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by the Secretary's determination may, within 30 days of the date of this notice, bring an action in any appropriate district court of the United States to set aside the determination on the ground that the determination is erroneous.

Description of Amended Certificate:

Export Trade Certificate of Review No. 88-00012, was originally issued to NTMA on October 18, 1988 (53 FR 43140, October 25, 1988).

NTMA's Export Trade Certificate of Review has been amended so that the attached list will constitute the “Members” of the Certificate within the meaning of section 325.2(1) of the Regulations (15 CFR 325.2(1)).

Start Signature

Effective Date: December 5, 2000.

Dated: April 23, 2001.

Vanessa M. Bachman,

Acting Director, Office of Export Trading Company Affairs.

End Signature

NTMA Certificate Member List Application 88-4A012

NameLocation
A & A Industries, IncPeabody, MA.
A & A Machine Company, IncSouthampton, PA.
A & A Machine Shop, IncLa Marque, TX.
A & B MachineVan Nuys, CA.
A & B Machine ShopRockford, IL.
A & B Tool & Manufacturing CorpToledo, OH.
A & D PrecisionFremont, CA.
A & E Custom ManufacturingKansas City, KS.
A & E Machine Shop, IncLone Star, TX.
A & G Machine, IncAuburn, WA.
A & S Tool & Die Company, IncKernersville, NC.
A A Precisioneering, IncMeadville, PA.
A B A DivisionManchester, CT.
Start Printed Page 21336
A B C 0 Tool & EngineeringPhoenix, AZ.
A B Heller, IncMilford, MI.
A B N Industrial Co., IncBuena Park, CA.
A B R Enterprises IncSouth Pasadena, CA.
A. C. Cut-Off, IncAzusa, CA.
A C Machine, IncAkron, OH.
A E Machine Works, IncHouston, TX.
A F C Tool Company, IncDayton, OH.
A I M Tool & DieGrand Haven, MI.
AMA PlasticsCorona, CA.
A M C Precision, IncN. Tonawanda, NY.
A M DesignE. Canton, OH.
A M Machine Company, IncBaltimore, MD.
A MfgGrand Terrace, CA.
APEC, LLCHingham, MA.
A S C Corporation OwingsMills, MD.
ATC Distribution GroupLouisville, KY.
A+ EngineeringIpswich, MA.
A-G Tool & DieMiamitown, OH.
A-Line Tool & Die, IncLouisville, KY.
A-RanD, IncPhoenix, AZ.
ABBEC ManufacturingRochester, NY.
Abbott Machine & Tool, IncToledo, OH.
Abbott Tool, IncToledo, OH.
Ability Tool CompanyRockford, IL.
Able Wire EDM, IncBrea, CA.
Abrams Airborne ManufacturingTucson, AZ.
Absolute ManufacturingN. Chelmsford, MA.
Acadiana Hydraulic Works, IncNew Iberia, LA.
Accu Die & Mold IncStevensville, MI.
Accu-Roll, IncRochester, NY.
Harrison Enterprise, IncPhoenix, AZ.
AccuCraftNew Haven, MO.
Accudynamics, IncMiddleboro, MA.
Accudyne Aerospace & DefensePalm Bay, FL.
Accura Industries, IncRochester, NY.
Accurate Grinding CorpWarwick, RI.
Accurate Grinding & Mfg. CorpLos Angeles, CA.
Accurate MachiningMukilteo, WA.
Accurate Manufacturing CompanyGlendale, CA.
Accurate Manufacturing CompanyAlsip, IL.
Accurate Products CoTucson, AZ.
Accurite Machine & Mfg. IncLouisville, KY.
Accutronics, IncLittleton, CO.
Ace Manufacturing CompanyCincinnati, OH.
Ace Specialty Company, IncTonawanda, NY.
Ackley Machine CorporationMoorestown, NJ.
Acme Brass & Machine Works, IncKansas City, MO.
ACMT, Inc dba A C Tool & MachineLouisville, KY.
Acraloc CorporationOak Ridge, TN.
Acro Industries, IncRochester, NY.
Acro Tool & Die Company, IncAkron, OH.
Actco Tool & Mfg. CoMeadville, PA.
Action Die & Tool IncWyoming, MI.
Action Mold & Machining, IncGrand Rapids, MI.
Action Precision Grinding IncNorth Tonawanda, NY.
Action SuperAbrasive ProductsBrimfield, OH.
Action Tool & Die IncRockford, IL.
Active Tool CompanyMeadville, PA.
Acucut, IncSouthington, CT.
Acutec Precision Machining IncSaegertown, PA.
Ada Machine Company, IncSanta Clara, CA.
Adams Engineering, Division ofSouth Bend, IN.
Adaptive Technologies IncSpringboro, OH.
Addison Precision Mfg. CorpRochester, NY.
Adena Tool CorporationDayton, OH.
Admill Machine CompanyNewington, CT.
Adron Tool CorporationMenomonee Falls, WI.
Advance Gear & Machine CorpGardena, CA.
Advance Manufacturing CorpCleveland, OH.
Advance Manufacturing TechnologySalt Lake City, UT.
Advanced Ceramic TechnologyOrange, CA.
Start Printed Page 21337
Advanced Composite ProductsHuntington Beach, CA.
Advanced Cutting Tools, IncClio, MI.
Advanced Machine & Eng. CoRockford, IL.
Advanced Machine ProgrammingMorgan Hill, CA.
Advanced Machining CorporationSalisbury, NC.
Advanced Measurement Labs, IncSun Valley, CA.
Advanced Mold & Tooling IncRochester, NY.
Advanced Tooling Systems, IncComstock Park, MI.
Advantage Mold & DesignMeadville, PA.
Aero Comm MachiningWichita, KS.
Aero Design & Manufacturing CoPhoenix, AZ.
Aero Engineering & Mfg. CompanyValencia, CA.
Aero Gear, IncWindsor, CT.
Aero Machining CompanyGarden Grove, CA.
Aero Mechanical Engineering, IncHuntington Beach, CA.
Aero-Tech Engineering, IncWichita, KS.
Aerofab, IncTucson, AZ.
Aerostar Aerospace IncPhoenix, AZ.
Aetna Machine CompanyCochranton, PA.
Aggressive Tool & Die, IncBuckner, KY.
Agrimson Tool CompanyBrooklyn Park, MN.
Ahaus Tool & Engineering, IncRichmond, IN.
Aimco Precision, IncPhoenix, AZ.
Airfoil Technology, IncGilbert, AZ.
Airmetal CorporationJackson, MI.
Ajax Tool, IncFort Wayne, IN.
Akro Tool Co., IncCincinnati, OH.
Akron Steel Fabricators CompanyAkron, OH.
Akron Tool & Die Company, IncAkron, OH.
Alamance Machine Company, IncBurlington, NC.
Alart Tool & Die, IncHouston, TX.
Albertson & Hem, IncWichita, KS.
Albion Machine & Tool CompanyAlbion, MI.
Alco Manufacturing, IncSanta Ana, CA.
Alfred Manufacturing CompanyDenver, CO.
Alfro Custom ManufacturingWaterbury, CT.
Alger Machine Company, IncRochester, NY.
Alignment Engineering Co., IncKnoxville, TN.
ALKAB Contract Manufacturing, IncNew Kensington, PA.
All Five Tool Company, IncBristol, CT.
All Tool CompanyUnion, NJ.
All Tools CompanyOklahoma City, OK.
All Tools Texas, IncHouston, TX.
All Weld MachineMilpitas, CA.
All-Tech Machine & Eng., IncSan Jose, CA.
All-Tech Machining, IncWilmer, AL.
Allen Aircraft Products, IncRavenna, OH.
Allen Precision Industries, IncAsheboro, NC.
Allen Precision Machining CoAngleton, TX.
Allen Randall Enterprises, IncAkron, OH.
Alliance Machine Tool Co., IncLouisville, KY.
Allied Mechanical ProductsOntario, CA.
Allied Screw Products, IncMishawaka, IN.
Allied Tool & Die Company, LLCPhoenix, AZ.
Allied Tool & Die, IncCleveland, OH.
Allied Tool & Machine, IncSaginaw, MI.
Allied Tool & Machine CompanyKernersville, NC.
Allied Tools of TexasHouston, TX.
Alloy Metal ProductsHayward, CA.
Allstate Tool & Die, IncRochester, NY.
Almar Mfg. & Engineering, IncGarden Valley, CA.
Alpha Mold Inc., LLCHuber Heights, OH.
Alpha Mold West IncBroomfield, CO.
Alpha Precision Machining IncKent, WA.
Alpha Tool & Machine CompanyBellmawr, NJ.
Alpha Tooling, IncSanta Fe Springs, CA.
Alpine Precision, IncNorth Billerica, MA.
Alro Specialty MetalsSt. Louis, MO.
Alt's Tool & Machine, IncSantee, CA.
Alton Products, IncMaumee, OH.
Alves Precision EngineeredWatertown, CT.
Amatrol, IncJeffersonville, IN.
Start Printed Page 21338
Ambel Precision Mfg. CorpBethel, CT.
Ambox, IncHouston, TX.
American Machine & Gundrilling, CoMaple Grove, MN.
American Metal Masters, IncPlantsville, CT.
American Mfg. & Machining, IncRacine, WI.
American Mold & Engineering CoFridley, MN.
American Precision MachiningPhoenix, AZ.
American Precision TechnologiesSan Fernando, CA.
American Tool & Die, IncToledo, OH.
American Wire EDM, IncOrange, CA.
Amerimold, IncMogadore, OH.
Ameritech Die & Mold, IncMooresville, NC.
Amity Mold CompanyTipp City, OH.
Ampswiss EngineeringFremont, CA.
Anchor Lamina IncMadison Heights, MI.
Anchor Tool & Die CompanyCleveland, OH.
Anchor Tool & Die CompanyWarren, MI.
Anders Machine and EngravingRochester, NY.
Anderson Tool & Engineering CoAnderson, IN.
Andrew Tool Company, IncPlymouth, MN.
Anglo-American Mold, IncLouisville, KY.
Angus LLCIndianapolis, IN.
Anmar Precision Components IncNorth Hollywood, CA.
Anoplate CorporationSyracuse, NY.
Apex Precision Technologies, IncCamby, IN.
Apex Machine CompanyFt. Lauderdale, FL.
Apex Manufacturing, IncPhoenix, AZ.
Apex Tool & Manufacturing, IncEvansville, IN.
Apollo E.D.M. CompanyFraser, MI.
Apollo Precision, IncPlymouth, MN.
Apollo Products IncWilloughby, OH.
Applegate EDM, IncDallas, TX.
Applied Engineering, IncYankton, SD.
Applied Technology ManufacturingRochester, NY.
Aram Precision Tool & Die, IncChatsworth, CA.
Arc Drilling IncGarfield Heights, OH.
Arca SystemsTacoma, WA.
Arco Industries, IncDayton, OH.
Arco Metals CorporationBaltimore, MD.
Ardekin Machine CompanyRockford, IL.
Area Tool & Manufacturing, IncMeadville, PA.
Aremco, IncGrand Rapids, MN.
Argo Tool CorporationTwinsburg, OH.
Argus Machine, IncTucson, AZ.
Aries Tool, IncNew Berlin, WI.
Arkansas Tool & Die, IncNorth Little Rock, AR.
Arken Manufacturing, IncCleveland, OH.
Arlington Machine & Tool CompanyFairfield, NJ.
Arma Tool & Die Company, IncRidgefield, CT.
Armin Tool & Manufacturing CoSouth Elgin, IL.
Armstrong-Blum Mfg. CoMt. Prospect, IL.
Armstrong Machine Works, IncRogersville, TN.
Armstrong Mold, Machining DivEast Syracuse, NY.
Armstrong Technology, IncSunnyvale, CA.
Arnett Tool, IncNew Paris, OH.
Arrington Supply House, IncTuscaloosa, AL.
Arro Tool & Die, IncLakewood, NY.
Arrow Diversified Tooling, IncEllington, CT.
Arrow Grinding, IncTonawanda, NY.
Arrowsmith International, IncSouthfield, MI.
Artisan Machining, IncBohemia, NY.
Ascension IndustriesNorth Tonawanda, NY.
Ash Machine CorporationPataskala, OH.
Aspen Precision TechnologiesPetaluma, CA.
Associated Electro-MechanicsSpringfield, MA.
Associated Gear, IncSanta Fe Springs, CA.
Associated TechnologiesBrea, CA.
Associated Toolmakers, IncKeokuk, IA.
Associates Commercial CorpIrving, TX.
Astley Precision Machine CoIrwin, PA.
Astro Automation, IncIrwin, PA.
Astro Machine Works IncEphrata, PA.
Start Printed Page 21339
Astrotronics IncMesa, AZ.
AT Engineering & Mfg., IncChatsworth, CA.
Atec EngineeringPhoenix, AZ.
Atec Tool & Engineering, IncSanta Clara, CA.
Athens IndustriesSouthington, CT.
Atkins Tool CompanyRiverton, NJ.
Atlantic Alloys, IncBristol, RI.
Atlantic Precision Products IncBiddeford, ME.
Atlantic Tool & Die CompanyStrongsville, OH.
Atlas Die & Manufacturing CoRockford, IL.
Atlas Machine & Supply, IncLouisville, KY.
Atlas Tool, IncRoseville, MI.
August Machine, IncPhoenix, AZ.
Austin Machine Company IncO'Fallon, MO.
Austinburg Machine, IncAustinburg, OH.
Austro Mold IncorporatedRochester, NY.
Autocam CorporationKentwood, MI.
Automated Cells & Equipment, IncPainted Post, NY.
Automated EDM IncorporatedRamsey, MN.
Automatic Stamp Products, IncCleveland, OH.
Automation Tool & Die, IncBrunswick, OH.
Automation Tool CompanyCookeville, TN.
Axian TechnologyPhoenix, AZ.
Axis Mfg. IncTempe, AZ.
Ay Machine CompanyEphrata, PA.
Ay-Mac Precision, IncYorba Linda, CA.
Azbill Tool & Die, IncHuntington Beach, CA.
B & A Design IncVernon, CT.
B & B Machine & Grinding ServiceDenver, CO.
B & B Manufacturing CompanyLargo, FL.
B & B Precision Mfg., IncAvon, NY.
B & B Tool Company, IncRockford, IL.
B & E Tool Company, IncSouthwick, MA.
B & G Quality Machine & ToolBaltimore, MD.
B & H Fabricators, IncWilmington, CA.
B & H Tool Co. IncSan Marcos, CA.
B & H Tool Works, IncRichmond, KY.
B & K Engineering, IncMountain View, CA.
B & L Tool and Machine CompanyPlainville, CT.
B & M Machine Corporation of RacineRacine, WI.
B & R Mold, IncSimi Valley, CA.
B C D Metal Products IncMalden, MA.
B J Williams Machining CoEdinboro, PA.
BMCO Industries IncCranston, RI.
B P I CorporationSanta Clara, CA.
BT Laser, IncSanta Clara, CA.
B-W Grinding Service, IncHouston, TX.
Babbitt Bearing, IncSyracuse, NY.
Bachman Machine Company, IncSt. Louis, MO.
Bachmann Precision MachineSouth El Monte, CA.
Badge Machine Products, IncCanandaigua, NY.
Baham & Sons Machine Works, IncHouston, TX.
Bahrs Die & Stamping CompanyCincinnati, OH.
Baker Hill Industries, IncCoral Springs, FL.
Banner Machine IncPhoenix, AZ.
Banner Tool & Die, IncRockford, IL.
Barberie MoldGardena, CA.
Barile Precision Grinding IncCleveland, OH.
Basic VISan Jose, CA.
Bass Machining IncBaltimore, MD.
Bateman Manufacturing Co., IncHayward, CA.
The Baughman GroupLouisville, KY.
Baumann EngineeringClaremont, CA.
Bawden Industries, IncRomulus, MI.
Baxter Machine Products, IncHuntingdon, PA.
Bay Industrial MachineGreen Bay, WI.
Bayport Machine, IncLa Porte, TX.
Beach Mold & Tool, IncNew Albany, IN.
Beacon Tool Company, IncWhittier, CA.
Beaver Fab IncCedar Hill, TX.
Beaver Tool & Machine Company, IncFeasterville, PA.
The Bechdon Company, IncUpper Marlboro, MD.
Start Printed Page 21340
Bechier Cams, IncAnaheim, CA.
Becker, IncKenosha, WI.
Becksted Machine, IncTucson, AZ.
Bedard Machine, IncBrea, CA.
Bel-Kur, IncTemperance, MI.
Belco Tool & Mfg. IncMeadville, PA.
Belgian Screw Machine ProductsJackson, MI.
Bell Engineering, IncSaginaw, MI.
Beilco Precision ManufacturingMcKinney, TX.
Beloit Precision Die Co. IncBeloit, WI.
Benda Tool & Model WorksHercules, CA.
Bendon Gear MachineRockland, MA.
Bennett Tool & MachineFremont, CA.
Bennett Tool & Die CompanyNashville, TN.
Benning IncBlame, MN.
Bent River Machine IncClarkdale, AZ.
Berman Tool & DieWaldorf, MD.
Bermar Associates, IncTroy, MI.
Bertram Tool & Machine Co., IncFarrell, PA.
Best Tool & Manufacturing CoKansas City, MO.
Best Way Stamping IncLa Mirada, CA.
Bestway Industries, IncCleveland, OH.
Beta Machine Co. IncCleveland, OH.
Beta Tool & Mold/Dyna-TechWadsworth, OH.
Bilar Tool & Die CorporationWarren, MI.
Billet Industries, IncYork, PA.
Bishop Steering Technology, IncIndianapolis, IN.
Blackburn Melton Mfg. CompanyHouston, TX.
Blackwood Grinding IncHurst, TX.
Blandford Machine & Tool CoLouisville, KY.
Blue Chip Mold, IncRochester, NY.
Blue Chip Tool Company, IncNew Castle, PA.
Bluegrass Forging, Tool & DieShelbyville, KY.
Bob's Tool & Cutter GrindingIndianapolis, IN.
Boice Industrial CorporationRuffsdale, PA.
Boittech IncWest Newton, PA.
Boring, IncRockford, IL.
Bosma Machine & ToolTipp City, OH.
Boston Centerless IncWoburn, MA.
Bowden Manufacturing CorpWilloughby, OH.
Boyce Machine, IncCuyahoga Falls, OH.
Boyle, IncFreeport, PA.
Bra-Vor Tool & Die Company, IncMeadville, PA.
Bradford Machine Company IncBrattleboro, VT.
Bradhart Products, IncBrighton, MI.
Bramko Tool & Engineering, IncO' Fallon, MO.
Brimar Products IncFontana, CA.
Brinkman Tool & Die, IncDayton, OH.
Bristol Instrument Gears, IncForestville, CT.
Britt Tool IncBrazil, IN.
Brittain Machine, IncWichita, KS.
Broadway Companies, IncEnglewood, OH.
Brogdon Tool & Die, IncBlue Springs, MO.
Brookfield Machine, IncWest Brookfield, MA.
Brooklyn Machine & Mfg. Co. IncCuyahoga Heights, OH.
Brooklyn Scraping & Re-MachiningW. Lafayette, IN.
Brown-Covey, IncKansas City, MO.
Brownstown Quality Tool & DesignBrownstown, IN.
The Budd CompanyShelbyville, KY.
Budney Overhaul & Repair, LTDBerlin, CT.
Buerk Tool & Machine CorporationBuffalo, NY.
Buiter Tool & Die, IncGrand Rapids, MI.
Bundy Manufacturing IncEl Segundo, CA.
Burckhardt America, IncGreensboro, NC.
Burco Precision Products, IncDenton, TX.
Burger Engineering, IncOlathe, KS.
Burgess Brothers, IncCanton, MA.
Burkland Textron IncGoodrich, MI.
Burton Industries IncMentor, OH.
C + H Manufacturing IncOntario, CA.
C & C Machine CompanyAkron, OH.
C & C Manufacturing CorporationEnglewood, CO.
Start Printed Page 21341
C & G Machine & Tool Co., IncGranby, MA.
C & J Industries IncMeadville, PA.
C & M Machine Products, IncWilloughby, OH.
C & R Manufacturing, IncShawnee, KS.
C & S Machine & ManufacturingLouisville, KY.
C A R Engineering & MfgVictor, NY.
C B EnterprisesManchester, CT.
C B S Manufacturing Company, IncWindsor, CT.
C D M Tool & Mfg. Co., IncHartford, WI.
C F A Company, IncMilford, CT.
CG Manufacturing CompanyWilloughby, OH.
C J Winter Machine TechnologiesRochester, NY.
C K ToolHarborcreek, PA.
C M Gordon Industries IncSanta Fe Springs, CA.
C M Industries, IncOld Saybrook, CT.
C M Smillie & CompanyFerndale, MI.
C N C Machine & EngineeringColorado Springs, CO.
C N C Precision Machining, IncComstock Park, MI.
C.N.C. Tool & MoldNaples, FL.
C R E Enterprises, IncPhoenix, AZ.
C T D Machines, IncLos Angeles, CA.
C T M, IncGrand Rapids, MI.
C V Tool Company, IncSouthington, CT.
C. G. Tech, IncPhoenix, AZ.
C-P Mfg. Corp.Van Nuys, CA.
Caco Pacific CorporationCovina, CA.
Cadco Program & MachineSt. Charles, MO.
Cal-WeldFremont, CA.
Calder Machine Co. (C M C)Florence, SC.
California MoldFullerton, CA.
Calmax Machining, IncSanta Clara, CA.
Cambridge Specialty Company, IncKensington, CT.
Cambridge Tool & Die CorpCambridge, OH.
Cameron Machine Shop, IncRichardson, TX.
Campbell Grinding & Machine, IncLewisville, TX.
Campbell Machinery, IncStow, OH.
CAMtech Precision ManufacturingJupiter, FL.
CamTech Systems IncAlhambra, CA.
Canto Tool CorporationMeadville, PA.
Capitol Technologies, IncSouth Bend, IN.
Capitol Tool & Die, L. PMadison, TN.
Carbi-Tech, IncApollo, PA.
Carbide Probes, IncDayton, OH.
Cardinal Machine Company, IncStrongsville, OH.
Carius Tool Co., IncCleveland, OH.
Carlin Machine Company, IncSouthborough, MA.
Carlson Capital Manufacturing Co.Rockford, IL.
Carlson Industrial Grinding IncErie, PA.
Carlson Tool & ManufacturingCedarburg, WI.
Cascade Mold & Die, IncPortland, OR.
Cass Screw Machine ProductsBrooklyn Center, MN.
Castle Precision ProductsStockton, CA.
Catalina Precision Engineering, LLCOrange, CA.
Catalina Tool & Mold, IncTucson, AZ.
Cates Machine Shop, IncTyler, TX.
Cee-San Machine & FabricationHouston, TX.
Cempi Industries IncHuntington Beach, CA.
Centaur Tool & Die, IncBowling Green, OH.
Centennial Technologies, IncSaginaw, MI.
Center Line Machine CompanyLafayette, CO.
Center Line ToolFreeport, PA.
Center Line Industries, IncWest Springfield, MA.
Central Industrial SupplyGrand Prairie, TX.
Central Mass. Machine, IncHolyoke, MA.
Central States Machine ServiceElkhart, IN.
Central Tool & Machine Co., IncBridgeport, CT.
Central Tool Company, IncFortville, IN.
Central Tools, IncCranston, RI.
Centric Machine & InstrumentTampa, FL.
Century Die CompanyFremont, OH.
Century Mold Company, IncRochester, NY.
Century Tool & Engr., IncIndianapolis, IN.
Start Printed Page 21342
Certified Grinding & MachineRochester, NY.
Certified Industries, II, LLCPhoenix, AZ.
Challenger Worldwide (USA), LLCChandler, AZ.
Chalmers & Kubeck, IncAston, PA.
Chamtek Mfg., IncRochester, NY.
Chandler Tool & Design IncRockford, IL.
Chance Tool & Die Co., IncCincinnati, OH.
Chapman Engineering, IncSanta Ana, CA.
Charmilles TechnologiesLincolnshire, IL.
Chase Machine & Mfg. CoRochester, NY.
Chelar Tool & Die, IncBelleville, IL.
Cherokee IndustriesHampshire, IL.
Cherry Valley Tool & Machine IncBelvidere, IL.
The Chesapeake Machine CoBaltimore, MD.
Chicago Grinding & Machine CoMelrose Park, IL.
Chicago Mold Engineering Co., IncSt. Charles, IL.
Chickasha Manufacturing CompanyChickasha, OK.
Chippewa Tool & Manufacturing CoWoodville, OH.
CHIPSCO, IncMeadville, PA.
Christie Manufacturing, IncGainesville, TX.
Christopher Tool & ManufacturingSolon, OH.
Circle-K-IndustriesSterling, VA.
City Industrial Tool & DieHarbor City, CA.
Clarion Tech. Caledonia ToolCaledonia, MI.
Clark & Wheeler Engineering, IncCerritos, CA.
Clark-Reliance CorporationStrongsville, OH.
Clarke Engineering, IncNorth Hollywood, CA.
Class Machine & Welding, IncAkron, OH.
Classic ToolSaegertown, PA.
Classic Tool, IncMacedonia, OH.
Clay & Bailey Mfg. CoKansas City, MO.
Cleveland Electric LaboratoriesTwinsburg, OH.
Clifton Automatic ScrewLake City, PA.
Cloud CompanySan Luis Obispo, CA.
Coast Cutters Company, IncSouth El Monte, CA.
Coastal Machine CompanyBranford, CT.
Cobak Tool & Manufacturing CoSt. Louis, MO.
Coffey AssociatesWashington, DC.
Colbrit Manufacturing Co., IncChatsworth, CA.
A E Cole Die & EngravingColumbus, OH.
Collins Instrument CompanyAngleton, TX.
Collins Machine & Tool Co., IncMadison, TN.
Collins Machine Works, IncWeilford, SC.
Collins Manufacturing, IncEssex, MA.
Colonial Machine CompanyKent, OH.
Colonial Machine & Tool Co., IncCoventry, RI.
Colorado Laser Marking, IncColorado Springs, CO.
Colorado Surface Grinding, IncDenver, CO.
Columbia Machine Works, IncColumbia, TN.
Columbia Products, IncDallastown, PA.
Comac Manufacturing CorporationOroville, CA.
Comet Tool, IncHopkins, MN.
Comfab, IncSpartanburg, SC.
Command Tooling SystemsRamsey, MN.
Commerce Grinding, IncDallas, TX.
Commonwealth Machine Co., IncDanville, VA.
Competition Tooling, IncHigh Point, NC.
Competitive Engineering IncTucson, AZ.
Composidie, IncApollo, PA.
Compu Die, IncWyoming, MI.
Compumachine IncorporatedWilmington, MA.
Computech Manufacturing Co., IncNorth Kansas City, MO.
Computerized Machining Service,Englewood, CO.
Concept Tool & Die CompanyEuclid, OH.
Conco Systems, IncVerona, PA.
Condor Engineering, IncColorado Springs, CO.
Connecticut Jig Grinding, IncNew Britain, CT.
Connelly Machine WorksSanta Ana, CA.
Connolly Tool & Machine CoDallas, TX.
Connor Formed Metal ProductsGrand Prairie, TX.
Conroy & Knowlton, IncLos Angeles, CA.
Consolidated Mold & Mfg. IncKent, OH.
Start Printed Page 21343
Consulting-Design-Construction, IncPhoenix, AZ.
Conti Machine Tool Company, IncHaverhill, MA.
Conti Tool & Die CompanyAkron, OH.
Continental Precision, IncPhoenix, AZ.
Continental Tool & MachineStrongsville, OH.
Continental Tool & ManufacturingLenexa, KS.
Contour Metrological & Mfg., IncTroy, MI.
Converse Industries IncKenosha, WI.
Convex Mold, IncSterling Heights, MI.
R F Cook Manufacturing CoStow, OH.
Cook Machine and EngineeringGardena, CA.
Cook Specialty CompanyGreen Lane, PA.
CoorstekLivermore, CA.
Corbitt Mfg. CompanySt. Louis, MO.
Cornerstone Screw MachineBurbank, CA.
Corrigan Manufacturing Co., IncRockford, IL.
Corrugated Roller & Machine IncSanta Fe Springs, CA.
Corry Custom MachineCorry, PA.
Corver Engineering Company, IncDetroit, MI.
Cosar Mold, IncBrimfield, OH.
Costa Machine, IncAkron, OH.
Country Machine & Tool, IncTipp City, OH.
Covert Manufacturing, IncGalion, OH.
Cox Mfg. Co. IncSan Antonio, TX.
Cox Tool Company, IncExcelsior Springs, MO.
Craft Tech, IncCarrollton, TX.
Craft-Tech Enterprises, IncTroy, MI.
Craig Machinery & Design, IncLouisville, KY.
Creative Precision, WestPhoenix, AZ.
Creb Engineering, IncPascoag, RI.
Crenshaw Die & ManufacturingIrvine, CA.
Crest Manufacturing CompanyLincoln, RI.
Criterion Tool & Die, IncBrook Park, OH.
Crossland MachineryKansas City, MO.
CrossRidge PrecisionOak Ridge, TN.
Crown Machine, IncRockford, IL.
Crown Mfg. Co., IncNewark, CA.
Crown Mold & MachineStreetsboro, OH.
Crown Tool & Die Co., IncBridgeport, CT.
Crucible Materials CorporationCamillus, NY.
Crush Master Grinding CorpWalnut, CA.
Cumberland Machine CompanyNashville, TN.
Custom Engineering, IncEvansville, IN.
Custom Gear & Machine, IncRockford, IL.
Custom Machine, IncWoburn, MA.
Custom Machine, IncCleveland, OH.
Custom Mold & Design, IncNew Hope, MN.
Custom Tool & Design, IncErie, PA.
Custom Tool & Grinding IncWashington, PA.
Custom Tool & Model CorpFrankfort, NY.
Cut-Right Tools CorporationWilloughby, OH.
D & B Industries, IncDayton, OH.
D & H Manufacturing CompanyFremont, CA.
D & J Precision Machining, IncHayward, CA.
D & K Industries, IncChatsworth, CA.
D & N Precision, IncSan Jose, CA.
D & R Precision MachiningSan Jose, CA.
D & S Manufacturing CorporationSouthwick, MA.
D. F. O'Brien Precision MachiningSanta Fe Springs, CA.
D K Mold & Engineering, IncWyoming, MI.
D M E CompanyMadison Heights, MI.
D M Machine & ToolKennerdell, PA.
D M Machine Company, IncWilloughby, OH.
D P I, IncSouthampton, PA.
D P Tool & Machine IncAvon, NY.
D S A Precision Machining, IncLivonia, NY.
D S Greene Company, IncWakefield, MA.
D S Mfg., IncVentura, CA.
DT Scheu & KnissLouisville, KY.
D-Velco ManufacturingPhoenix, AZ.
D-K Manufacturing CorporationFulton, NY.
DaCo Precision ManufacturersSandy, UT.
Start Printed Page 21344
Dadeks Machine Works CorporationHouston, TX.
Daily Industrial ToolsCosta Mesa, CA.
Dan's Precision GrindingSun Valley, CA.
Danco Precision, IncPhoenixville, PA.
Dane Systems, IncStevensville, MI.
Danly IEMMiddleburg Heights, OH.
Data Mold & Tool, IncWalbridge, OH.
Dave Jones MachinistsMishawaka, IN.
David Engineering & MfgCorona, CA.
Davis Machine & ManufacturingArlington, TX.
Davken IncBrea, CA.
Dayton Progress CorporationWest Carrollton, OH.
Dayton Reliable Tool & Mfg. CoDayton, OH.
De King Screw Products IncBurbank, CA.
De Long Manufacturing Co., IncSanta Clara, CA.
De-Lux Mold & Machine, IncBrady Lake, OH.
Dean MachineCranston, RI.
Dearborn Precision TubularFryeburg, ME
Deck Brothers, Inc.Buffalo, NY.
Dekalb Tool & Die, IncTucker, GA.
Delco CorporationAkron, OH.
Delco Machine & GearNo.Long Beach, CA.
Dell ToolPenfield, NY.
Delltronics, IncEnglewood, CO.
Delta Machine & Tool CompanyCleveland, OH.
Delta Machining, IncNiles, MI.
Delta Tech, IncMentor, OH.
Demaich Industries, IncJohnston, RI.
Dependable Machine Company, IncIndianapolis, IN.
Dependable Tool & ManufacturingCleveland, OH.
Desert Precision Mfg., IncTucson, AZ.
Designs For Tomorrow, IncSt. Louis, MO.
Detail Technologies, IncGrandville, MI.
Detroit Tool & Engineering CoLebanon, MO.
Deutsch ECDHemet, CA.
Devtek EngineeringColorado Springs, CO.
Di-MatrixPhoenix, AZ.
Dial Machine CompanyAndalusia, PA.
Diamond Lake Tool, IncAnoka, MN.
Diamond Machine Works, IncSeattle, WA.
Diamond Tool & Die Co., IncEuclid, OH.
Diamond Tool & Engineering, IncBertha, MN.
Dickey & Son Machine & Tool CoIndianapolis, IN.
Dickson Machine & Tool, IncDickson, TN.
Die Cast Die and Mold, IncPerrysburg, OH.
Die DimensionsKentwood, MI.
Die Matic CorporationBrooklyn Heights, OH.
Die-Namic IncTaylor, MI.
Die Products CorporationMinneapolis, MN.
Die Quip CorpBethel Park, PA.
Die Tech Industries, LtdProvidence, RI.
The Die Works IncHillsboro, MO.
Die-Matic Tool and Die, IncGrand Rapids, MI.
Die-Mension CorporationBrunswick, OH.
Die-Namic Tool & Mfg., IncRockford, IL.
Diemaster Tool & Mold, IncMacedonia, OH.
Dietooling, Div. of DiemoldingWampsville, NY.
Digital Tool & Die, IncGrandville, MI.
Dimac Manufacturing Co., IncAlexander, AR.
Distinctive Machine CorporationGrand Rapids, MI.
Diversified Engraving StampAkron, OH.
Diversified ManufacturingLockport, NY.
Diversified Tool & DieVista, CA.
Diversified Tool, IncMukwonago, WI.
Dixie Tool & Die Co., IncGadsden, AL.
Dixon Automatic Tool, IncRockford, IL.
Double D Machine & Tool CompanyFremont, OH.
Douglas Machine & Engineering CoDavenport, IA.
Downey Grinding Company, IncDowney, CA.
Dowty's Machine Works, IncBaton Rouge, LA.
Doyle Manufacturing, IncHolland, OH.
Drabik Tool and Die, IncBrook Park, OH.
Start Printed Page 21345
Drewco CorporationFranksville, WI.
Drill Masters IncHamden, CT.
Du-Well Grinding Company, IncMilwaukee, WI.
Dugan Tool & Die CompanyToledo, OH.
Dugan Tool & Die, IncCottage Hills, IL.
Dun-Rite Fabricating, IncSaginaw, MI.
Dun-Rite Industries, IncMonroe, MI.
Dunn & Bybee Tool Company, IncSparta, TN.
Duplicate Parts Company, IncSan Marcos, CA.
Dura-Metal Products CorporationIrwin, PA.
Durivage Pattern & Mfg. Co. IncWilliston, OH.
DuWest Tool & Die, IncCleveland, OH.
Dwyer Instruments, IncGrandview, MO.
DynaGrind Precision, IncNew Kensington, PA.
Dynamic Engineering, IncMinneapolis, MN.
Dynamic Fabrication, IncSanta Ana, CA.
Dynamic Machine & FabricatingPhoenix, AZ.
Dynamic Technologies and DesignGrand Rapids, MI.
Dynamic Tool & Design, IncMenomonee Falls, WI.
Dysinger IncorporatedDayton, OH.
E & C Manufacturing Company, IncToledo, OH.
E B & Sons Machine IncAliquippa, PA.
E. C. M. Mold & Die, IncTucson, AZ.
E C M Of FloridaJupiter, FL.
E. D. M. Exotics, IncHayward, CA.
E F Precision IncWillow Grove, PA.
EISC/CMEToledo, OH.
E J Codd Co. of Baltimore CityBaltimore, MD.
E K L Machine Company, IncAndalusia, PA.
E-M-Solutions, IncFremont, CA.
E R C Concepts Company, IncSunnyvale, CA.
E. T. Tool, IncRacine, WI.
E W Johnson Company, IncLewisville, TX.
E-Fab, IncSanta Clara, CA.
Eagle Mold Company, IncCarlisle, OH.
Eagle Technology GroupSt. Joseph, MI.
Eagle Tool & Machine CompanySpringfield, OH.
Eason & WailerPhoenix, AZ.
East Coast Tool & Mfg., IncOrchard Park, NY.
East Side Machine, IncWebster, NY.
East Texas Machine Works, IncLongview, TX.
Eaton Manufacturing, IncFremont, CA.
Ebway CorporationFort Lauderdale, FL.
Eckert Enterprises Ltd.Tempe, AZ.
Eckert Machining, IncSan Jose, CA.
Eclipse Mold, IncClinton Township, MI.
Eclipse Tool & Die, IncWayland, MI.
Ed Brown Products, IncPerry, MO.
Edco, IncToledo, OH.
EDM Supplies, IncDowney, CA.
Edwardsville Machine & WeldingEdwardsville, IL.
Efficient Die & Mold IncCleveland, OH.
Egli Machine Company, IncSidney, NY.
Ehlert Tool Co., IncNew Berlin, WI.
Ehrhardt Tool & Machine CompanyGranite City, IL.
Eicom CorporationMoraine, OH.
86 Tool CompanyCambridge Springs, PA.
Ejay's Machine Co., IncFullerton, CA.
Elcam Tool & Die, IncWilcox, PA.
Electra Form Industries IncVandalia, OH.
Electric Enterprise IncStratford, CT.
Electro Form CorporationBinghamton, NY.
Electro-Freeto Manufacturing CoWayland, MA.
Electro-Mechanical Products, IncDenver, CO.
Electro-Tech MachiningLong Beach, CA.
Electroform Co. IncMachesney Park, IL.
Elgin Machine CorporationInwood, NY.
Elite Tool & Machinery Systems, IncO'Fallon, MO.
Elizabeth Carbide Die Co., IncMcKeesport, PA.
Elizabeth Carbide of NorthLexington, NC.
Elkhart Machine GroupElkhart, IN.
Elliot Tool & Manufacturing Co.St. Louis, MO.
Start Printed Page 21346
Elliott's Precision, IncPeoria, AZ.
Ellison Machine CompanyLaurens, SC.
Elrae IndustriesAlden, NY.
Emig Machine and ToolWarwick, PA.
Emmert Welding & ManufacturingIndependence, MO.
Empire Manufacturing CorporationBridgeport, CT.
Engineered Machine Tool, IncWichita, KS.
Engineered Pump Services, IncPasadena, TX.
Entek CorporationNorman, OK.
Enterprise Tool & DieBrooklyn Heights, OH.
Ephrata Precision Parts, IncDenver, PA.
Epicor Software CorporationMinneapolis, MN.
Erca Tool Die & Stamping CompanyRichmond Hill, NY.
Erickson Tool & Machine CompanyRockford, IL.
Erie Shore Machine Co., IncCleveland, OH.
Erie Specialty Products, IncErie, PA.
Ermco, IncCleveland, OH.
Estee Mold & Die, IncDayton, OH.
Esterle Mold & Machine Co.Stow, OH.
Estul Tool & Manufacturing Co.Matthews, NC.
Evans Tool & Die, IncConyers, GA.
Ever Fab, IncEast Aurora, NY.
Ever-Ready Tool, IncLargo, FL.
Everett Pattern and Mfg., IncMiddleton, MA.
Everite Machine ProductsPhiladelphia, PA.
Arthur J. Evers CorporationRiverton, NJ.
Ewart-Ohison Machine CompanyCuyahoga Falls, OH.
Ex-Cel Machine & Tool, IncLouisville, KY.
Exact Cutting Service, IncBrecksville, OH.
Exact Tool & Die, IncBrook Park, OH.
Exacta Tech IncLivermore, CA.
Exacto, Inc of South BendSouth Bend, IN.
Excalibur Precision Machine Co.Hampstead, NH.
Excel Machine CompanyPhiladelphia, PA.
Excel Manufacturing, IncValencia, CA.
Excel Manufacturing IncSeymour, IN.
Excel Stamping & ManufacturingHouston, TX.
Executive Mold CorporationHuber Heights, OH.
Ezell Precision Tool CompanyClearwater, FL.
F & F Machine SpecialtiesMishawaka, IN.
F & G Tool & Die CompanyDayton, OH.
F & L Tools CorporationCorona, CA.
F & S Tool, IncErie, PA.
F C Machine Tool & Design, IncCuyahoga Falls, OH.
F D T Precision Machine Co., IncTaunton, MA.
F G A IncBaton Rouge, LA.
F K Instrument Co., IncClearwater, FL.
FMF RacingRancho Dominguez, CA.
F M Machine CompanyAkron, OH.
F N Smith CorporationOregon, IL.
F P Pla Tool & Manufacturing Co.Buffalo, NY.
F R B Machine IncEmlenton, PA.
F S G IncMishawaka, IN.
F. S. Machining, IncEnglewood, CO.
F T T Manufacturing IncGeneseo, NY.
F Tinker & Sons CompanyPittsburgh, PA.
F W Gartner Thermal Spraying Co.Houston, TX.
F-Squared, IncTarentum, PA.
Fab Lab, IncMaryland Heights, MO.
FabCorp, IncHouston, TX.
Fairbanks Machine & ToolRaytown, MO.
Fairview Machine Company, IncTopsfield, MA.
Faith Tool & Manufacturing, IncWilloughby, OH.
Falcon Precision Machining CoWest Springfield, MA.
Falls City Machine TechnologyLouisville, KY.
FallsMold & Die, IncStow, OH.
Fame Tool & Manufacturing CoCincinnati, OH.
Fantasy Manufacturing, IncWindsor, CA.
Fargo Machine Company, IncAshtabula, OH.
Farzati Manufacturing CorpGreensburg, PA.
Fast Physics IncTempe, AZ.
Fay & Quartermaine MachiningEl Monte, CA.
Start Printed Page 21347
Fay Tool & Die, IncOrlando, FL.
Feedall, IncWilloughby, OH.
Feilhauer's Machine Shop, IncCincinnati, OH.
Feller Tool Co., IncElyria, OH.
Fenton Manufacturing, IncAshtabula, OH.
Fenwick Machine & ToolPiedmont, SC.
Feral Productions LLCNewark, CA.
Ferriot IncAkron, OH.
First International BankHartford, CT.
Fischer Precision Spindles, IncBerlin, CT.
Fischer Tool & Die CorporationTemperance, MI.
Fitzwater Engineering CorpScituate, RI.
Five Star Industries LLCDayton, OH.
Five Star Tool Company, IncRochester, NY.
Flasche Models & Patterns, IncCleveland, OH.
Fleck Machine Company, IncHanover, MD.
Foriska Machine ShopSaegertown, PA.
Forster Tool & Mfg., IncBensenville, IL.
Forte CompanyKansas City, MO.
The Foster GroupRochester, NY.
Foster-Tobin CorpMeadville, PA.
4 Axis Machining, IncDenver, CO.
Fox Valley Tool & Die, IncKaukauna, WI.
Franchino Mold & EngineeringLansing, MI.
Frank J. Stolitzka & Son, IncAkron, OH.
Frasal Tool Co., IncNewington, CT.
Frazier Aviation, IncSan Fernando, CA.
Fre-Mar Industries, IncBrunswick, OH.
J F Fredericks Tool Company, IncFarmington, CT.
Fredon CorporationMentor, OH.
Freeport Welding & FabricatingFreeport, TX.
Frost & CompanyCharlestown, RI.
Fulcrum Group, LLCHayward, CA.
Fulton Industries, IncRochester, IN.
Furno Co. IncPomona, CA.
Future FabricatorsPhoenix, AZ.
Future Tool & Die Company, IncCleveland, OH.
Future Tool & Die, IncGrandville, MI.
Fyco Tool & Die, IncHouston, TX.
G & G Tool Company, IncSidney, OH.
G & K Machine CompanyDenver, CO.
G & L Tool CorpAgawam, MA.
G B F Enterprises, IncSanta Ana, CA.
G B Tool CompanyWarwick, RI.
G F T Manufacturing CompanyVandergrift, PA.
G H Tool & Mold, IncWashington, MO.
G M T CorporationWaverly, IA.
G R McCormick, IncBurbank, CA.
G S C Manufacturing IncIndianapolis, IN.
G S G Tool and ManufacturingMeadville, PA.
G S Precision, IncBrattleboro, VT.
Gadsden Tool, IncGadsden, AL.
Gainesville Machining IncGainesville, TX.
Gales Manufacturing CorporationRacine, WI.
Galgon Industries, IncFremont, CA.
Gambar Products Company, IncWarwick, RI.
Garcia AssociatesArlington, VA.
Gatco, IncPlymouth, MI.
Gauer Mold & Machine CompanyTalimadge, OH.
Gaum, IncRobbinsville, NJ.
Gear Manufacturing, IncAnaheim, CA.
Gebhardt Machine Works, IncPortland, OR.
Geiger Manufacturing, IncStockton, CA.
Gem City Engineering CompanyDayton, OH.
Gene's Gundri 11 ing IncAlahambra, CA.
General Aluminium ForgingsColorado Springs, CO.
General Die Engraving, IncTwinsburg, OH.
General Engineering CompanyToledo, OH.
General Grinding, IncOakland, CA.
General Machine-Diecron, IncGriffin, GA.
General Machine Shop, IncCheverly, MD.
General Tool & Die Company, IncRacine, WI.
Start Printed Page 21348
General Tool CompanyCincinnati, OH.
Genesee Manufacturing CompanyRochester, NY.
Genesee Precision Mfg., IncAvon, NY.
Genesis Plastics & EngineeringScottsburg, IN.
Gentec Manufacturing IncSan Jose, CA.
Geometric Tool & Machine CoPiedmont, SC.
German Machine, IncRochester, NY.
Germantown Tool & MachineHuntingdon Valley, PA.
Gibbs Die Casting CorporationHenderson, KY.
Gibbs Machine Company, IncGreensboro, NC.
Gilbert Engineering CompanyGlendale, AZ.
Gilbert Machine & Tool CompanyGreene, NY.
Gill Tool & Die, IncGrand Rapids, MI.
Gillette Machine & Tool CompanyRochester, NY.
Girard Tool & Die/Jackburn MfgGirard, PA.
Gischel Machine Company IncBaltimore, MD.
Givmar Precision MachiningMountain View, CA.
Glaze Tool & Engineering, IncNew Haven, IN.
Glendale Machine Company, IncSolon, OH.
Glendo CorporationEmporia, KS.
Glidden Machine & Tool, IncNorth Tonawanda, NY.
Global Mfg. & AssemblyPhoenix, AZ.
Global Precision, IncDavie, FL.
Golis Machine, IncMontrose, PA.
Goodwin-Bradley Pattern Co., IncProvidence, RI.
Graham Tech, IncCochranton, PA.
Granby Mold, IncWalled Lake, MI.
Graybill's Tool & , IncManheim, PA.
Great Lakes E.D.M., IncClinton Twp., MI.
Great Lakes Metal Treating, IncTonawanda, NY.
Great Lakes Precision MachineNiles, MI.
Great Western Grinding & EngHuntington Beach, CA.
Grind All Precision Tool CoWarren, MI.
Grind-All, IncCleveland, OH.
GrindC/O, IncChelmsford, MA.
Grinding Service & Mfg. CoBristol, CT.
Grindworks IncGlendale, AZ.
Grosmann PrecisionBaliwin, MO.
Grover Gundrilling, IncNorway, ME.
Guill Tool & Engineering CoWest Warwick, RI.
Gulf MachiningPinellas Park, FL.
Gulf South Machine/Drilex CorpHouston, TX.
Gurney Precision MachiningSaint Petersburg, FL.
H & H Machine CompanyWhittier, CA.
H & H Machine Shop Of Akron, IncAkron, OH.
H & H Machined Products, IncErie, PA.
H & K Machine Service Co., IncO'Fallon, MO.
H & M Precision MachiningSanta Clara, CA.
H & S Enterprises, IncMonrovia, CA.
H & W Machine CompanyBroomfield, CO.
H & W Tool Company, IncDover, NJ.
H B Machine, IncPhoenix, AZ.
HB Molding, IncLouisville, KY.
H-B Tool & Cutter Grinding, IncWillow Grove, PA.
H Brauning Company, IncManassas, VA.
H H Mercer, IncMesquite, TX.
H R M Machine, IncCosta Mesa, CA.
Haberman Machine, IncSt. Paul, MN.
Hackett Precision CompanyNashville, TN.
Hager Machine & Tool, IncHouston, TX.
Haig Precision Mfg. CorpCampbell, CA.
Hal-West Technologies, IncKent, WA.
Hamblen Gage CorporationIndianapolis, IN.
Hamill Manufacturing CompanyTrafford, PA.
Hamilton Industries, IncTempe, AZ.
Hamilton Machine Co., IncNashville, TN.
Hamilton Mold & Machine, IncCleveland, OH.
Hamilton Tool Company, IncMeadville, PA.
Hamlin Steel Products, IncAkron, OH.
Hammill Manufacturing CompanyToledo, OH.
Hammon Precision TechnologiesHayward, CA.
Hanks Pattern CompanyMontrose, MN.
Start Printed Page 21349
Hanover Machine CompanyAshland, VA.
Hans Rudolph, IncKansas City, MO.
Hansen EngineeringHarbor City, CA.
Hansford Manufacturing CorpRochester, NY.
The Hanson Group, LTDLudlow, MA.
Hanson MoldSt. Joseph, MI.
Har-Phill Machine Products, IncTempe, AZ.
Hardy Machine IncHatfield, PA.
Hardy-Reed Tool & Die CoManitou Beach, MI.
Harley & Son, IncYorba Linda, CA.
Hartup Tool IncColumbus, IN.
J W Harwood CompanyCleveland, OH.
Haserodt Machine & Tool, IncCleveland, OH.
Haskell Machine & Tool, IncHomer, NY.
Haumiller Engineering CompanyElgin, IL.
Hawkeye Precision, IncGilbert, AZ.
Hawkins Machine Company, IncCoventry, RI.
Hawkinson Mold Engineering CoAlhambra, CA.
Hayden Corporation WestSpringfield, MA.
Heatherington Machine CorpOrlando, FL.
Heinhold Engineering & MachineSalt Lake City, UT.
Heisey Machine Co., IncLancaster, PA.
Heitz Machine & ManufacturingMaryland Heights, MO.
Hellebusch Tool & Die, IncWashington, MO.
Helm Precision, LtdPhoenix, AZ.
Henman Engineering & MachineMuncie, IN.
Herman Machine, IncTallmadge, OH.
Herrick & Cowell CompanyHamden, CT.
Hetrick Mfg., IncLower Burrell, PA.
Heyden Mold & Bench CompanyTallmadge, OH.
Heyl Engraving, IncNorth Canton, OH.
Hi Tech Manufacturing, LLCGreensboro, NC.
Hi-Tech Machining & Engineering LLCTucson, AZ.
Hi-Tech Tool Industries, IncTroy, MI.
Hi-Tech Tool, IncLower Burrell, PA.
Hiatt Metal Products CompanyMuncie, IN.
Hickory Machine Company, IncNewark, NY.
High Tech Turning Co.Watertown, MA.
High-Tech IndustriesHolland, MI.
Highldnd Mfg. IncManchester, CT.
Hill Engineering, IncVilla Park, IL.
Hillcrest Precision Tool Co. IncHaverhill, MA.
Hillcrest Tool & Die, IncTitusville, PA.
Hilton Tool & Die CorporationRochester, NY.
Hittle Machine & Tool CompanyIndianapolis, IN.
Hobson & Motzer, IncDurham, CT.
Hodon Manufacturing, IncWilloughby, OH.
Hoercher Industries, IncEast Rochester, NY.
Hoffman Custom Tool & DieNewport Beach, CA.
Hoffstetter Tool & DieClearwater, FL.
Hole Specialists, IncLudlow, MA.
Holland Hitch Co.Wylie, TX.
Hollis Line Machine Co., IncHollis, NH.
Holmes Manufacturing CorporationCleveland, OH.
Holton Mold & EngineeringUpland, CA.
Homeyer Tool and Die Co.Marthasville, MO.
Honemasters, IncHuntington Beach, CA.
Hoop's Machine & Welding, IncDenton, TX.
Hope Manufacturing, IncGreensboro, NC.
Hoppe Tool, IncChicopee, MA.
Horizon IndustriesLancaster, PA.
Horizon Tool & Die Corp.Grandville, MI.
Houston Cutting Tools, IncHouston, TX.
Howell Tool & MachineFlower Mound, TX
Howland Machine CorporationColorado Springs, CO.
Hubbell Machine Company, IncCleveland, OH.
Humboldt Instrument CompanySan Leandro, CA
Hunt Machine & Manufacturing CoTallmadge, OH.
Huron Machine Products, IncFort Lauderdale, FL.
HydraWedge CorporationEl Segundo, CA.
Hydro Aluminum Cedar ToolsCedar Springs, MI.
Hydrodyne Division Of FPI, IncBurbank, CA.
Start Printed Page 21350
Hydromat, IncSt. Louis, MO.
Hygrade Precision TechnologiesPlainville, CT.
Hytron Manufacturing CompanyHuntington Beach, CA.
ILM Tool, IncHayward, CA.
IQC, IncVandalia, OH.
ISO Machining, IncPleasanton, CA.
I T M, IncShertz, TX.
ITW CIP Tool and DieSanta Fe Springs, CA.
Ideal Grinding Technologies, IncChatsworth, CA.
Imperial Die & Manufacturing CoCleveland, OH.
Imperial Machine & Tool CompanyWadsworth, OH.
Imperial Machining CoDenver, CO.
Imperial MfgSanta Fe Springs, CA.
Imperial NewbouldMeadville, PA.
Imperial Tool & Manufacturing CoLexington, KY.
IndTool, IncBurlington, NC.
Indiana Tool & Die CompanyIndiana, PA.
Industrial Babbitt BearingGonzales, LA.
Industrial Custom AutomaticDayton, OH.
Industrial Grinding, IncDayton, OH.
Industrial Machine CompanyOklahoma City, OK.
Industrial Machine & Tool Co., IncNashville, TN.
Industrial Machining CorporationSanta Clara, CA.
Industrial MaintenanceLavergne, TN.
Industrial Mold + MachineTwinsburg, OH.
Industrial Molds, IncRockford, IL.
Industrial Precision, IncWestfield, MA.
Industrial Precision ProductsOswego, NY.
Industrial Tool & Machine Co.Cuyahoga Falls, OH.
Industrial Tool, DieTucson, AZ.
Industrial Tool, IncMinneapolis, MN.
Industrial Tooling TechnologiesMuskegon, MI.
Ingersoll Contract ManufacturingLoves Park, IL.
Injection Mold & Machine CompanyAkron, OH.
Inland Tool & Manufacturing CoKansas City, KS.
Inline IncPhoenix, AZ.
Innex Industries, IncRochester, NY.
Innovative E D M, LLCTroy, MI.
Innovative Systems MachineToledo, OH.
Insulate IncAuburn, WA.
Integrated Machine SystemsBethel, CT.
Integrity Mfg. L.L.C.Farmington, CT.
International Stamping IncWarwick, RI.
International Tooling & StampingMt. Juliet, TN.
Interscope Manufacturing IncMiddletown, OH.
Intrex CorporationLouisville, CO.
Iverson Industries, IncWyandotte, MI.
J & A Tool Company, IncFranklin, PA.
J & F Machine CompanyCleveland, OH.
J & F Machine IncCypress, CA.
J & J Tool Co., IncLouisville, KY.
J & L EDMSunnyvale, CA.
J & M Machine, IncFairport Harbor, OH.
J & M UnlimitedAshland City, TN.
J.B.A.T. t/a Cherry HillCherry Hill, NJ.
JBK Manufacturing & DevelopmentDayton, OH.
J B Tool Die & Engineering, IncFort Wayne, IN.
J B Tool, IncPlacentia, CA.
J C B Precision Tool & Mold, IncCommerce City, CO.
J. C. Milling Co., IncRockford, IL.
J D Kauffman Machine Shop, IncChristiana, PA.
J D MachiningSanta Clara, CA.
J I Machine Company, IncSan Diego, CA.
J K Tool & Die, IncApollo, PA.
J M Fabrication CorporationArlington, TX.
J M Mold SouthEasley, SC.
J M Mold, IncPiqua, OH.
J M P Industries, IncCleveland, OH.
J M S Mold & Engineering CoSouth Bend, IN.
J R Custom Metal Products, IncWichita, KS.
JRM Machine CompanySt. Paul, MN.
J Ross Miller & Sons, IncKimberton, PA.
Start Printed Page 21351
J S Die & Mold, IncByron Center, MI.
Jackman MachiningCorona, CA.
Jackson & Heit Machine CompanySouthampton, PA.
Jacksonville Machine IncJacksonville, IL.
Jaco EngineeringAnaheim, CA.
Jaco Tool & Die, IncGrand Rapids, MI.
Jadco IncSpringfield, MA.
Jamison Mfg. CoNorth Royalton, OH
Jason Tool & Engineering, IncGarden Grove, CA.
Jatco Machine & Tool CompanyPittsburgh, PA.
Jena Tool CorporationDayton, OH.
Jenkins Machine, IncBethlehem, PA.
Jenn Manufacturing Company, IncWarminster, PA.
Jennison CorporationCarnegie, PA.
Jergens Tool and MoldEnglewood, OH.
Jergens, IncCleveland, OH.
Jesel, IncLakewood, NJ.
Jesse Industries, IncSparks, NV.
Jet Products Co., IncPhoenix, AZ.
Jewett Machine Mfg. Co., IncRichmond, VA.
Jig Grinding Service CompanyCleveland, OH.
Jirgens Modern Tool CorporationKalamazoo, MI.
John Ramming Machine CompanySt. Louis, MO.
Johnson Engineering CompanyIndianapolis, IN.
Johnson Precision, IncBuffalo, NY.
Johnson Tool, IncFairview, PA.
Joint Production Technology, IncMacomb, MI.
Joint Venture Tool & MoldSaegertown, PA.
Jonco Tool CompanyRacine, WI.
T R Jones Machine Company, IncCrystal Lake, IL.
Joseph Alziebler CompanyArleta, CA.
Juell Machine Company, IncPomona, CA.
Just in Time CNC Machining, IncDansville, NY.
K & A ToolingSanta Ana, CA.
K & E Mfg. CompanyLee's Summit, MO.
K & H Mold & Machine DivisionAkron, OH.
K & H Precision Products, IncHoneoye Falls, NY.
K & M Machine-Fabricating, IncCassopolis, MI.
K & M Precision Machining, IncSignal Hill, CA.
K & S Tool & Die, IncMeadville, PA.
K & S Tool & Mfg. Company, IncJamestown, NC.
K.C.K. Tool & Die Co., IncFerndale, MI.
K-Form, IncTustin, CA.
K L H Industries, IncGermantown, WI.
K L N Precision MachiningFremont, CA.
K M F, IncFairdale, KY.
K M S Machine Works, IncTaunton, MA.
K Mold & Engineering, IncGranger, IN.
K V, IncHuntingdon Valley, PA.
Ka-Wood Gear & Machine CompanyMadison Heights, MI.
Kahre Brothers, IncEvansville, IN.
Kalman ManufacturingMorgan Hill, CA.
Kamashian Engineering, IncBellf lower, CA.
Kanis Machine & Manufacturing, IncTewksbury, MA.
Kansas City Screw Products, IncKansas City, MO.
T. J. Karg Company, IncAkron, OH.
Karlson Machine Works, IncPhoenix, AZ.
Karsten PrecisionPhoenix, AZ.
Kaskaskia Tool & Machine, IncNew Athens, IL.
Kaufhold Machine Shop, IncLancaster, PA.
C B Kaupp & Sons, IncMaplewood, NJ.
Kearflex Engineering CompanyWarwick, RI.
Keck-Schmidt Tool & DieSouth El Monte, CA.
Kell-Strom Tool Company, IncWethersfield, CT.
Kellems & Coe Tool CorporationJeffersonville, IN.
Keller Technology CorporationTonawanda, NY.
Kelley Industries, IncEighty Four, PA.
Kelitech Precision Machining, IncSan Jose, CA.
Keim Manufacturing CompanyBenton Harbor, MI.
Kelmar, IncMidland, VA.
Kern-Mu-CoHayward, CA.
Kemco Tool & Machine CompanyFenton, MO.
Start Printed Page 21352
Kenlee Precision CorporationBaltimore, MD.
Kennametal IncLatrobe, PA.
Kennebec Tool & Die Co., IncAugusta, ME.
Kennedy & Bowden Machine CompanyLa Vergne, TN.
Kennick Mold & Die, IncCleveland, OH.
Kentucky Machine & Tool CompanyLouisville, KY.
Kern Special Tools Company, IncNew Britain, CT.
Ketcham Diversified Tooling IncCambridge, PA.
Kewill ERP, IncEdina, MN.
Keyes Machine Works, IncGates, NY.
Keystone Machine, IncLittlestown, PA.
Kimberly Gear & Spline, IncPhoenix, AZ.
King Machine & Engineering CoIndianapolis, IN.
King-Tek EDM & Precision MachiningFullerton, CA.
Kipp GroupOntario, CA.
Kirby Risk Precision MachiningLafayette, IN.
Kirca PrecisionRochester, NY.
Kiwanda Machine Works, IncClackamas, OR.
Klein Steel Service, IncRochester, NY.
Klix Tool CorporationSyracuse, NY.
Knowlton Manufacturing CompanyNorwood, OH.
Knust—S B OHouston, TX.
Kolar, IncIthaca, NY.
Kolenda Tool & Die, IncWyoming, MI.
Kordenbrock Tool & Die CompanyCincinnati, OH.
Kovacs Machine & Tool CompanyWallingford, CT.
Krause Tool, IncGolden, CO.
Kuester Tool & Die Co., IncQuincy, IL.
Kuhn Tool & Die CoMeadville, PA.
Kurt J. Lesker CompanyPittsburgh, PA.
Kurt Manufacturing CompanyMinneapolis, MN.
L & L Machine, IncLudlow, MA.
L & P Machine, IncSanta Clara, CA.
L A I Southwest, IncPhoenix, AZ.
L H Carbide CorporationFort Wayne, IN.
L P I CorporationHollywood, FL.
L R G CorporationJeannette, PA.
L R W Cutting Tools, IncPhoenix, AZ.
L T L Company, IncRockford, IL.
LaBarge Products, IncSt. Louis, MO.
Lake Manufacturing Co., IncNewburyport, MA.
Lakeside Manufacturing CompanyStevensville, MI.
Lamb Machine & Tool CompanyIndianapolis, IN.
Lamina, IncOak Park, MI.
Lampin CorporationUxbridge, MA.
Lancaster Machine ShopLancaster, TX.
Lancaster Metal Products CompanyLancaster, OH.
Lancaster Mold, IncLancaster, PA.
Land Specialties ManufacturingRaytown, MO.
Lane EnterpriseRochester, NY.
Lane Punch CorporationSalisbury, NC.
Laneko Engineering CompanyFt. Washington, PA.
Laneko Roll Form, IncHatfield, PA.
Lange Precision, IncFullerton, CA.
Langenau Manufacturing CompanyCleveland, OH.
Laser Automation, IncChagrin Falls, OH.
Laser Beam TechnologyHayward, CA.
Laser Fare, IncSmithfield, RI.
Laser Tool, IncSaegertown, PA.
LaserFab, IncConcord, CA.
Lathe Tool Works, IncRichmond, CA.
Lavelle MachineWestford, MA.
Lavigne Manufacturing, IncCranston, RI.
Layke IncorporatedPhoenix, AZ.
Layke Tool & Manufacturing, IncMeadville, PA.
LeBlanc Grinding CompanyAnaheim, CA.
Ledford Engineering Company, IncCedar Rapids, IA.
Lee's Grinding, IncCleveland, OH.
Leech Industries, IncMeadville, PA.
Lees EnterpriseChatsworth, CA.
Leese & Co., IncGreensburg, PA.
Leggett & Platt, IncWhittier, CA.
Start Printed Page 21353
Leicester Die & Tool, IncLeicester, MA
Lemco-Miller CorporationDanvers, MA.
Lenz Technology, IncMountain View, CA.
Leonardi Manufacturing Co., IncWeedsport, NY.
Lewis AviationPhoenix, AZ.
Lewis Machine and Tool CompanyMilan, IL.
Lewis Machine & Tool Co. IncCuba, MO.
Liberty Precision Industries, Ltd.Rochester, NY.
Libra Precision MachiningTecumseh, MI.
Light & Medium Fabricating, IncWilloughby, OH.
Light Machines CorporationManchester, NH.
Ligi Tool & Engineering, IncPompano Beach, FL.
Lilly Software Associates, IncHampton, NH.
Limmco, IncNew Albany, IN.
Linco, IncPhoenix, AZ.
Lindberg Heat TreatingParamount, CA.
Linmark Machine Products, IncUnion, MO.
Little Rhody Machine Repair, IncCoventry, RI.
Littlecrest Machine Shop, IncHouston, TX.
Lloyd CompanyHouston, TX.
Lobart CompanyPacoima, CA.
Loecy Precision Mfg.Mentor, OH.
LOMA Automation Technologies, IncLouisville, KY.
Lordon EngineeringGardena, CA.
Louis C. Morin Co. IncN. Billerica, MA.
Loyal Machine Company, IncChelsea, MA.
Luick Quality Gage & Tool, IncMuncie, IN.
Lunar Tool & Machinery CompanySt. Louis, MO.
Lunar Tool & Mold, IncNorth Royalton, OH.
Lunquist Manufacturing CorpRockford, IL.
Lux Manufacturing, IncSunnyvale, CA.
Lynn Welding Co. IncNewington, CT.
Lyons Tool & Die CompanyMeriden, CT.
M & D Loe Manufacturing, IncBenicia, CA.
M & H Engineering Company, IncDanvers, MA.
M & H Tool & Die, IncGadsden, AL.
M & J Grinding & Tool Co.Holland, OH.
M & J Valve Services, IncLafayette, LA.
M & S Holes CorporationNew Brunswick, NJ.
M C I Tool & Die, IncSaginaw, MI.
M C Mold & Machine, IncTalimadge, OH.
M D F Tool CorporationNorth Royalton, OH.
M F Engineering Co. IncBristol, RI.
M J C Machine ToolingHudson, NH.
M J K PrecisionWoodland Park, CO.
M. J. Machining, IncMorgan Hill, CA.
M P ComponentsGrand Rapids, MI.
M P E Machine Tool IncCorry, PA.
M P Technologies, IncBrecksville, OH.
MRC TechnologiesBuffalo, NY.
M. R. Mold & Engineering CorpBrea, CA.
M S Willett, IncCockeysville, MD.
M T E, IncSan Jose, CA.
M T M GrindingThorndike, MA.
M-C Fabrication, IncOlathe, KS.
M-Ron CorporationGlendale, AZ.
M-Tron Manufacturing Company,San Fernando, CA.
Mac Machine and Metal Works, IncConnersville, IN.
Mac-Mold Base, IncRomeo, MI.
Machine IncorporatedStoughton, MA.
Machine MasterySanta Clara, CA.
Machine Specialties, IncGreensboro, NC.
Machine Tooling, IncCleveland, OH.
Machinist CooperativeGilroy, CA.
Machinists, IncSeattle, WA.
MacKay ManufacturingSpokane, WA.
Maddox Metal Works, IncDallas, TX.
Madgett Enterprises IncMilipitas, CA.
Magdic Precision Tooling, IncEast McKeesport, PA.
Maghielse Tool CorporationGrand Rapids, MI.
Magic Manufacturing, IncSunnyvale, CA.
Magna Machine & Tool CompanyNew Castle, IN.
Start Printed Page 21354
Magnum Manufacturing Center, IncColorado Springs, CO.
Magnus Mfg. CorpShortsville, NY.
Mahuta Tool CorpGermantown, WI.
Main Tool & Mfg. Co., IncMinneapolis, MN.
Maine Machine ProductsSouth Paris, ME.
Mainline Machine, IncBroussard, LA.
Majer Precision Engineering, IncTempe, AZ.
Major Tool & Machine, IncIndianapolis, IN.
MakinoMason, OH.
Malmberg Engineering, IncLivermore, CA.
Manda Machine Company, IncDallas, TX.
Manetek, IncBroussard, LA.
Manheim Special Machine ShopManheim, PA.
Mann Tool Company, IncPacific, MO.
Manor Research, IncHayward, CA.
Manufactured Technical SolutionsJenison, MI.
Manufacturing Machine CorpPawtucket, RI.
Manufacturing Service CorpWest Hartford, CT.
Marberry Machine, IncHouston, TX.
Marco Manufacturing CompanyAkron, OH.
Marcy Machine, IncGrandview, MO.
Mardon Tool & Die Company, IncRochester, NY.
Marini Tool & Die Company, IncRacine, WI.
Mans Systems Design, IncSpencerport, NY.
Markham Machine Co. IncAkron, OH.
Marlin Tool, IncCuyahoga Falls, OH.
Marquette Tool & Die CompanySt. Louis, MO.
Marshall Manufacturing CompanyMinneapolis, MN.
Martinek ManufacturingFremont, CA.
Martinelli MachineSan Leandro, CA.
Masco Machine, IncCleveland, OH.
Massachusetts Machine Works, IncWestwood, MA.
Massey Industries, IncHouston, TX.
Master Cutting & Engineering,Santa Fe Springs, CA.
Master Industries IncPiqua, OH.
Master Precision Tool CorpSterling Heights, MI.
Master Research & ManufacturingNorwalk, CA.
Master Tool & DieAnaheim, CA.
Master Tool & Mold, IncGrafton, WI.
Mastercraft Mold, IncPhoenix, AZ.
Mastercraft Tool CoSt. Louis, MO.
Mastercraft Tool & Machine CoSouthington, CT.
Masterman EngineeringKent, WA.
MaTech Machining TechnologiesSalisbury, MD.
Matthews Gauge, IncSanta Ana, CA.
Maudlin & Son Manufacturing CoKemah, TX.
May Tool & Die, IncNorth Royalton, OH.
May Tool & Mold Company, IncKansas City, MO.
Mayf ran InternationalCleveland, OH.
McCurdy Tool & Machine IncCaledonia, IL.
McAfee Tool & Die, IncUniontown, OH.
McDowell Enterprises, IncElkhart, IN.
Dan McEachern CompanyAlameda, CA.
McGill Manufacturing CompanyFlint, MI.
McGough & KilgussProvidence, RI.
Mclvor Manufacturing, IncBuffalo, NY.
McKee Carbide Tool DivisionOlanta, PA.
McKenzie Automation Systems, IncRochester, NY.
McNeal Enterprises, IncSan Jose, CA.
McNeill Manufacturing CompanyOakland, CA.
McSwain Manufacturing Corp.Cincinnati, OH.
Meadows Manufacturing Co., IncSunnyvale, CA.
Meadville Plating Company, IncMeadville, PA.
Meadville Tool GrindingMeadville, PA.
Mechanical Manufacturing CorpSunrise, FL.
Mechanical Metal Finishing CoGardena, CA.
Mechanized Enterprises, IncAnaheim, CA.
Medved Tool & Die CompanyMilwaukee, WI.
Menegay Machine & Tool CompanyCanton, OH.
Mercer Machine Company, IncIndianapolis, IN.
Mercier Tool & Die CompanyCanton, OH.
Meriden ManufacturingMeriden, CT.
Start Printed Page 21355
Merritt Tool Company, IncKilgore, TX.
Metal Cutting Specialists, IncHouston, TX.
Metal Form EngineeringRedlands, CA.
Metal Processors IncStevensville, MI.
Metallon, IncThomaston, CT.
Metals USA, Flagg Steel Co., IncSt. Louis, MO.
Metco Manufacturing Company, IncWarrington, PA.
Metplas, IncNatrona Heights, PA.
Metric MachiningMonrovia, CA.
Metric Precision IncSpartanburg, SC.
Metro Manufacturing, IncPhoenix, AZ.
Miami Tool & Die, IncHuntington, IN.
Michigan Machining IncMt. Morris, MI.
Micro Chrome & Lapping, IncSan Jose, CA.
Micro Engineering IncCaledonia, MI.
Micro Instrument CorporationRochester, NY.
Micro Matic Tool, IncYoungstown, OH.
Micro Precision CompanyHouston, TX.
Micro Precision CorporationLancaster, PA.
Micro Punch & Die CompanyRockford, IL.
Micro Surface Engineering, IncLos Angeles, CA.
Micro Tool & Manufacturing, IncMeadville, PA.
Micro-TecChatsworth, CA.
Micro-Tech Machine IncNewark, NY.
Micro-Tronics, IncTempe, AZ.
MicrofinishClayton, OH.
Micropulse West, IncTempe, AZ.
Mid-Central Manufacturing, IncWichita, KS.
Mid-Continent Engineering, IncMinneapolis, MN.
Mid-State Manufacturing, IncMilldale, CT.
Mid-States Forging Die & ToolRockford, IL.
Middle River Machine ServicesBaltimore, MD.
Midland Precision Machining, IncTempe, AZ.
Midway Mfg. IncElyria, OH
Midwest Machine & Manufacturing Co.Muskegon, MI.
Midwest Tool & Die CorporationFort Wayne, IN.
Midwest Tool & Engineering Co.Dayton, OH.
Mikana Manufacturing Co., IncSan Dimas, CA.
Mikron Machine, IncCranesville, PA.
Mikron Manufacturing, IncColorado Springs, CO.
Mu-Tool & Plastics IncZephyrhills, FL.
Milco Wire EDM, IncHuntington Beach, CA.
Millat Industries Corp.Dayton, OH.
Miller Equipment CorporationRichmond, VA.
Miller Machine & Design, IncCharlotte, NC.
Miller Mold CompanySaginaw, MI.
Millrite Machine IncWestfield, MA.
Milrose IndustriesCleveland, OH.
Miltronics, IncPainesville, OH.
Milwaukee Precision CorporationMilwaukee, WI.
Milwaukee Punch CorporationGreendale, WI.
Minco Tool & Mold IncDayton, OH.
Mission Tool & Manufacturing Co.Hayward, CA.
Mitchell Machine, IncSpringfield, MA.
Mitchum Schaefer, IncIndianapolis, IN.
Mittler Brothers Machine & ToolForistell, MO.
Mod Tech Industries, IncShawano, WI.
Model Machine Company, IncBaltimore, MD.
Model Mold & Machine Company,Noblesville, IN.
Modern Industries IncPhoenix, AZ.
Modern Machine CompanySan Jose, CA.
Modern Machine CompanyBay City, MI.
Modern Mold, IncGrand Rapids, MI.
Modern Technologies Corp.Xenia, OH.
Modular Mining Systems, IncTucson, AZ.
Mold Threads, IncBranford, CT.
Moldcraft, IncDepew, NY.
Monks Manufacturing Co., IncWilmington, MA.
Monsees Tool & Die, IncRochester, NY.
Montgomery Machine CompanyHouston, TX.
Moon Tool & Die, IncConneaut Lake, PA.
Moore Gear Mfg. Co., IncHermann, MO.
Start Printed Page 21356
Moore Machine, IncWalkerton, IN.
Moore Quality Tooling, IncDayton, OH.
Morlin IncorporatedErie, PA.
Morris Machine Co., IncIndianapolis, IN.
Morton & Company, IncWilmington, MA.
Moseys' Production MachinistsAnaheim, CA.
Moss Machine/ModuleSan Francisco, CA.
Motor Machine Co., IncEdison, NJ.
Mountain States Automation, IncEnglewood, CO.
Mt. Sterling IndustriesMt. Sterling, KY.
MTI Engineering Corp./MitutoyoHuntington Beach, CA.
Mueller Machine & Tool CompanyBerkeley, MO.
Muller Tool, IncCheektowaga, NY.
Multi Dimensional Machining IncEnglewood, CO.
Multi-Tool, IncSaegertown, PA.
Mustang-Major Tool & Die CoEden, NY.
Mutual Precision, IncWest Springfield, MA.
Mutual Tool & Die, IncDayton, OH.
Myers IndustriesAkron, OH.
MyersPrecision Grinding CompanyWarrensville Hts., OH.
Myles Tool Co., IncSanborn, NY.
N C Dynamics, IncLong Beach, CA.
N D T Industries, IncDayton, OH.
N E T & Die Company, IncFulton, NY.
Nashville Machine Company, IncNashville, TN.
National Carbide DieMcKeesport, PA.
National Jet Company, IncLaVale, MD.
National Tool & Machine Co. IncEast St. Louis, IL.
Nationwide Precision ProductsRochester, NY.
Neal Manufacturing, IncGreensboro, NC.
Nel-Mac Tool & Mfg. IncMcKinney, TX.
Nelson Bros. & Strom Co., IncRacine, WI.
Nelson EngineeringGarden Grove, CA.
Nelson Grinding, IncFullerton, CA.
Nelson Precision Drilling CoGlastonbury, CT.
Nemes Machine CoCuyahoga, OH.
Nerjan Development CompanyStamford, CT.
Neutronics, IncPhoenix, AZ.
New Age Plastics, IncSan Jose, CA.
New Century Fabricators, IncNew Iberia, LA.
New Century Remanufacturing, IncSanta Fe Springs, CA.
New Coy Fabrication, IncRochester, NY.
New England Die Co., IncWaterbury, CT.
New Standard CorporationYork, PA.
Newman Machine Company, IncGreensboro, NC.
Newton Tool & Manufacturing CoSwedesboro, NJ.
Niagara Punch & Die CorporationBuffalo, NY.
Nifty Bar, IncPenfield, NY.
Niles Machine & Tool Works, IncLivermore, CA.
Nixon Tool Co., IncRichmond, IN.
Noble Tool CorporationDayton, OH.
Norbert Industries, IncSterling Heights, MI.
Nordon Tool & Mold, IncRochester, NY.
Norman , IncCleveland, OH.
Normike Industries, IncPlainville, CT.
North Canton Tool Company, IncCanton, OH.
North Central Tool & Die, IncHouston, TX.
North Coast Tool & Mold CorpCleveland, OH.
North Easton Machine Co., IncNorth Easton, MA.
North Florida Tool EngineeringJacksonville, FL.
Northeast E D MNewburyport, MA.
Northeast Manufacturing Co., IncStoneham, MA.
Northeast Tool & ManufacturingIndian Trail, NC.
Northern Machine Tool CompanyMuskegon, MI.
Northland Extension DrillsGrove City, MN.
Northmont Tool & Gage IncClayton, OH.
Northwest Machine Works, IncGrand Junction, CO.
Northwest Tool CorporationTucson, AZ.
Northwest Tool & Die, IncSaegertown, PA.
Northwest Tool & Die CompanyGrand Rapids, MI.
Northwood Industries, IncPerrysburg, OH.
Norv's Molds, IncNyssa, OR.
Start Printed Page 21357
Norwood Tool CompanyDayton, OH.
Nova Manufacturing CompanyNorth Hollywood, CA.
Now-Tech Industries IncLackawanna, NY.
Nu-Tool Industries, IncNorth Royalton, OH.
Nu-Tech IndustriesGrandview, MO.
Numeric MachineFremont, CA.
Numeric Machining Co., IncWest Springfield, MA.
Numerical Precision, IncWheeling, IL.
Numerical Productions, IncIndianapolis, IN.
Numet MachineStratford, CT.
NuTec Tooling Systems, IncMeadville, PA.
O & S Machine Company, IncLatrobe, PA.
O-A, IncAgawam, MA.
OEM Controls IncShelton, CT.
O E M Industries, IncDallas, TX.
O E M, IncCorvallis, OR.
O-D Tool & Cutter IncMansfield, IvIA.
O'Keefe CeramicsWoodland Park, CO.
O'Neal Tool & Machine Co., IncDeSoto, MO.
Oakley Die & Mold Company, IncMason, OH.
Obars Machine & Tool CompanyToledo, OH.
Oberg Industries IncFreeport, PA.
Oconee Machine & Tool CompanyWestminster, SC.
Oconnor Engineering LaboratoriesCosta Mesa, CA.
Ohio Gasket & Shim CompanyAkron, OH.
Ohio Transitional Machine & ToolToledo, OH.
Ohlemacher Mold & DieStrongsville, OH.
Oilfield Die Manufacturing CoLafayette, LA.
Okuma America CorporationCharlotte, NC.
Olson Mfg. & Distribution IncShawnee, KS.
Omax CorporationKent, WA.
Omega One, IncMaple Heights, OH.
Omega Tool, IncMenomonee Falls, WI.
Omni Tool, IncWinston Salem, NC.
Orenda National Aerospace, LLCGlendale, AZ.
Osborn Products, IncPhoenix, AZ.
Osley & Whitney, IncWestfield, MA.
Overland BoilingDallas, TX.
Overton & Sons Tool & Die CoMooresville, IN.
Overton CorporationWilloughby, OH.
P & N Machine Company, IncHouston, TX.
P & P Mold & Die, IncTallmadge, OH.
P & A Tool & Die, IncRochester, NY.
P & R Industries, IncRochester, NY.
PDQ Machine, IncMachesney Park, IL.
PDT Tooling, IncLincolnshire, IL.
P. J. M. Machine IncNorth Canton, OH.
PMR, IncAvon, OH.
PR Machine Works, IncMansfield, OH.
P. Tool & Die Company, IncN. Chili, NY.
P-K Tool & Manufacturing CompanyChicago, IL.
Pacific Bearing CompanyRockford, IL.
Pacific Precision Machine, IncSan Carlos, CA.
Pacific Tool & Die, IncBrunswick, OH.
Pahl Tool ServicesCleveland, OH.
Palma Tool & Die Company, IncLancaster, NY.
Palmer Machine Company IncConway, NH.
Palmer Manufacturing CompanyMaiden, MA.
Parallax, IncLargo, FL.
Paramount Machine & Tool CorpFairfield, NJ.
Park Hill Machine, IncLancaster, PA.
Parker Plastics CorporationPittsburgh, PA.
Parr-Green Mold and Machine CoNorth Canton, OH.
Parris Tool & Die CompanyGoodlettsville, TN.
Parrish Machine, IncSouth Bend, IN.
Pasco Tool & Die, IncMeadville, PA.
Patco Machine & Fab, IncHouston, TX.
Path Technologies, IncMentor, OH.
Patkus Machine CompanyRockford, IL.
Patriot Machine, IncSt. Charles, MO.
Patriot Precision ProductsNorth Canton, OH.
Patten Tool & Engineering, IncKittery, ME.
Start Printed Page 21358
Paul E. Seymour Tool & Die CoNorth East, PA.
Peerless Precision, IncWestfield, MA.
Peffen Machine CompanyNashville, TN.
Peko Precision ProductsRochester, NY.
Pell Engineering & ManufacturingPeiham, NH.
Penco PrecisionFontana, CA.
Pendleton Tool Company, IncErie, PA.
Peninsula Screw Machine ProductsBelmont, CA.
Penn State Tool & Die CorpNorth Huntingdon, PA.
Penn United Tech, IncSaxonburg, PA.
Pennoyer-Dodge CompanyGlendale, CA.
Pennsylvania CrusherCuyahoga Falls, OH.
Pennsylvania Tool & Gages, IncMeadville, PA.
Perfection Mold & Machine CoAkron, OH.
Perfection Tool & Mold CorpDayton, OH.
Perfecto Tool & Engineering CoAnderson, IN.
Perfekta, IncWichita, KS.
Performance GrindingTempe, AZ.
Performance Machining, IncIrwin, PA.
Perry Tool & Research, IncHayward, CA.
Petersen Precision Engineering, LLCRedwood City, CA.
F H Peterson Machine CorporationStoughton, MA.
Peterson Jig & Fixture, IncRockford, MI.
Petro-Chem Industries, IncStafford, TX.
Pettey Machine Works, IncTrinity, AL.
Petty EnterprisesHollister, CA.
Phil-Coin Machine & Tool CoHudson, MA.
Philips Enabling Technologies GroupSouth Plainfield, NJ.
Philips Machining Company, IncCoopersville, MI.
Phoenix Gear, IncPhoenix, AZ.
Phoenix GrindingPhoenix, AZ.
Phoenix Tool & Gage, IncPhoenix, AZ.
Phoenix, IncSeekonk, MA.
Piece-Maker CompanyTroy, MI.
Pierce Products, IncCleveland, OH.
Pierson Precision, IncCampbell, CA.
Pinehurst Tool & DieConneaut Lake, PA.
Pinnacle Engineering Co., IncManchester, MI.
Pinnacle Manufacturing Co., IncChandler, AZ.
Pioneer IndustriesSeattle, WA.
Pioneer Precision Grinding, IncWest Springfield, MA.
Pioneer Tool & Die CompanyAkron, OH.
Pioneer Tool & Die, IncMeadville, PA.
Pioneer Tool Die & Machine CoIvyland, PA.
Pitt-TexLatrobe, PA.
Plainfield Stamping Illinois, IncPlainfield, IL.
Piano Machine & Instrument IncGainesville, TX.
Plas Tool CoNiles, IL.
Plastic Mold Technology IncGrand Rapids, MI.
Plastipak Packaging, IncMedina, OH.
Plating Technology, IncColumbus, OH.
Pleasant Precision, IncKenton, OH.
Plesh Industries, IncBuffalo, NY.
Pocal Industries IncScranton, PA.
Pol-Tek Industries, LtdCheektowaga, NY.
Polynetics, IncFullerton, CA.
Polytec Products CorporationMenlo Park, CA.
Ponderosa Industries, IncDenver, CO.
Popp Machine & Tool, IncLouisville, KY.
Port City Machine & Tool CompanyMuskegon Heights, MI.
Portage Knife Company, IncMogadore, OH.
Post Products, IncKent, OH.
Powder Metallurgy CompanyLewisville, TX.
Powers Bros. Machine, IncMontebello, CA.
Powill ManufacturingPhoenix, AZ.
PQ Enterprise, L.L.CGrand Rapids, MI.
Practical Machine CompanyBarberton, OH.
Pre Tech ManufacturingSchaumburg, IL.
Pre-Mec CorporationClinton Township, MI.
Precise Products CorporationMinneapolis, MN.
Precise Technologies IncLargo, FL.
Precise Tool & Die, IncLeechburg, PA.
Start Printed Page 21359
Precision Aircraft ComponentsDayton, OH.
Precision Aircraft MachiningSun Valley, CA.
Precision Automated MachiningEnglewood, CO.
Precision Automation Co., IncClarksville, IN.
Precision Balancing & AnalyzingMentor, OH.
Precision Boring CompanyDetroit, MI.
Precision Deburring EnterprisesSun Valley, CA.
Precision Die & Stamping IncTempe, AZ.
Precision Engineering, IncUxbridge, MA.
Precision Engineering & Mfg. CoHaymarket, VA.
Precision Gage & Tool CompanyDayton, OH.
Precision Gage, IncTempe, AZ.
Precision Grinding & Mfg. CorpRochester, NY.
Precision Grinding, IncBirmingham, AL.
Precision Grinding, IncPhoenix, AZ.
Precision Identity CorporationCampbell, CA.
Precision Industries, IncProvidence, RI.
Precision Industries, IncBaton Rouge, LA.
Precision Machine & InstrumentHouston, TX.
Precision Machine & Tool CoLongview, TX.
Precision Machine & EngineeringPhoenix, AZ.
Precision Machine RebuildingRogers, MN.
Precision Machine CompanyLancaster, PA.
Precision ManufacturingGrand Junction, CO.
Precision Metal Crafters, LtdGreensburg, PA.
Precision Metal FabricationDayton, OH.
Precision Metal Tooling, IncSan Leandro, CA.
Precision Mold & EngineeringWarren, MI.
Precision Mold Base CorporationTempe, AZ.
Precision Mold Welding, IncLittle Rock, AR.
Precision Mold, IncKent, WA.
Precision Piece Parts IncMishawaka, IN.
Precision Products IncGreenwood, IN.
Precision ResourceHuntington Beach, CA.
Precision Resource Tool & MachineShelton, CT.
Precision ResourcesHawthorne, CA.
Precision SpecialtiesSan Jose, CA.
Precision Specialists, IncWest Berlin, NJ.
Precision Stamping & Tool, IncIrvine, CA.
Precision Stamping, IncFarmers Branch, TX.
Precision Technology, IncChandler, AZ.
Precision Tool & Die, IncDerry, NH.
Precision Tool Work, IncNew Iberia, LA.
Precision Tool & Mold, IncClearwater, FL.
Precision Wire EDM Service IncGrand Rapids, MI.
Precision Wire Cut CorporationWaterbury, CT.
Preferred Grinding Co., IncDallas, TX.
Preferred Tool & Die Co., IncComstock Park, MI.
Preferred Tool Company, IncSeymour, IN.
Prescott Aerospace, IncPrescott Valley, AZ.
Pressco ProductsKent, WA.
Prestige Mold IncorporatedRancho Cucamonga, CA.
Price Products, IncEscondido, CA.
PrideChamplin, MN.
Prima Die Castings, IncClearwater, FL.
Prime-Co Tool IncEast Rochester, NY.
Primeway Tool & Engineering CoMadison Heights, MI.
Pro-Tech Machine, IncBurton, MI.
Pro-Mold, IncSpencerport, NY.
Process Equipment CompanyTipp City, OH.
Product Engineering CompanyColumbus, IN.
Production Saw Works, IncNorth Hollywood, CA.
Production Tool & Mfg. CoPortland, OR.
Producto Machine CompanyBridgeport, CT.
Professional Grinding, IncAkron, OH.
Professional Instruments Co., IncHopkins, MN.
Professional Machine & Tool, IncValley Center, KS.
Professional Machine & Tool CoGallatin, TN.
Proficient Machining Co., IncMentor, OH.
Profile Grinding, IncCleveland, OH.
Proformance Manufacturing, IncCorona, CA.
Progressive Concepts MachiningPleasanton, CA.
Start Printed Page 21360
Progressive MetallizingAkron, OH.
Progressive Tool CompanyWaterloo, IA.
Progressive Tool & Die, IncMeadville, PA.
Progressive Tool & Die, IncGardena, CA.
Promax Tool Co.Rancho Cordova, CA.
ProMold, IncCuyahoga Falls, OH.
Prompt Machine Products, IncChatsworth, CA.
Proper Cutter, IncGuys Mills, PA.
Proper Mold & Engineering, IncCenter Line, MI.
Proteus Manufacturing Co., IncWoburn, MA.
Proto-Design, IncRedmond, WA.
Proto Machine & ManufacturingKent, OH.
Proto-Cam, IncGrand Rapids, MI.
Protonics Engineering CorpCerritos, CA.
Prototype & Plastic Mold CoMiddietown, CT.
Puehier Tool CompanyValley View, OH.
Pulibrite, IncFremont, CA.
Punch Press Products, IncLos Angeles, CA.
Punchcraft Company—Subsidiary ofWarren, MI.
Q K Mold & Manufacturing, IncKent, OH.
Q M C Technologies, IncDepew, NY.
Qualfab MachiningRedwood City, CA.
Quality Centerless Grinding CorpMiddlefield, CT.
Quality Engineering ServicesWallingford, CT.
Quality Grinding & MachiningBridgeport, CT.
Quality Machine Engineering, IncSanta Rosa, CA.
Quality Machining Technology, IncOakdale, CA.
Quality Mold & Die, IncSanta Ana, CA.
Quality Mold & EngineeringBaroda, MI.
Quality Mold Shop, IncMcMinnville, TN.
Quality Precision, IncHayward, CA.
Quality Tool CompanyToledo, OH.
Quantum Manufacturing, IncBurbank, CA.
Quick-Way StampingsEuless, TX.
R & D Machine ShopDallas, TX.
R & D Specialty/MancoPhoenix, AZ.
R & D Tool & EngineeringLee's Summit, MO.
R & G Precision Tool IncThomaston, CT.
R & H Manufacturing IncKingston, PA.
R & J Tool, IncBrookville, OH.
R & M Machine ToolFreeland, MI.
R & M Manufacturing CompanyNiles, MI.
R & M Mold Manufacturing CoBloomsbury, NJ.
R & R Precision Machine, IncWichita, KS.
R & S EDM, IncW. Springfield, MA.
R & S Machining, IncOakville, MO.
RB Machine Co., IncPhoenix, AZ.
R D C Machine, IncSanta Clara, CA.
R Davis EDMAnaheim, CA.
R E F Machine Company, IncMiddlefield, CT.
REO Hydro-Pierce IncDetroit, MI.
R G F Machining TechnologiesCanon City, CO.
R J S CorporationAkron, OH.
R M IVan Nuys, CA.
R 0 C Carbon CompanyHouston, TX.
R S Precision Industries, IncFarmingdale, NY.
P. T R Slotting & Machine IncCuyahoga Falls, OH.
RTS Wright Industries, IncNashville, TN.
R W Machine, IncHouston, TX.
P. W. Smith Company, IncDallas, TX.
B. Radtke & Sons, IncRound Lake Park, IL.
Rainbow Tool & Machine Co., IncGadsden, AL.
Rabid CorporationReisterstown, MD.
Ram Tool, IncGrafton, WI.
Ranger Tool & Die CompanySaginaw, MI.
Rapid-Line IncGrand Rapids, MI.
Rapidac Machine CorporationRochester, NY.
Ratnik Industries, IncVictor, NY.
Rawlings EngineeringMacon, GA.
Ray Paradis Machine, IncJackson, CA.
Re-Del EngineeringCampbell, CA.
Realco Diversified, IncMeadville, PA.
Start Printed Page 21361
Reardon Machine Co., IncSt. Joseph, MO.
Reber Machine & Tool CompanyMuncie, IN.
Rectack of AmericaLos Angeles, CA.
Reed Instrument CompanyHouston, TX.
Reese Machine Company, IncAshtabula, OH.
Reichert Stamping CompanyToledo, OH.
Reid Industries, IncRoseville, MI.
Reitz Tool & Die Company, IncWalbridge, OH.
Reitz Tool, IncCochranton, PA.
Reliable EDM, IncHouston, TX.
Remarc Manufacturing IncHayward, CA.
Remmele Engineering, IncSt. Paul, MN.
Remtex, IncLongview, TX.
Reny & Company IncEl Monte, CA.
Repairtech International, IncVan Nuys, CA.
Repko Tool IncMeadville, PA.
Republic IndustriesLouisville, KY.
Republic-LagunCarson, CA.
Research Tool, IncEast Haven, CT.
Reuther Mold & Manufacturing CoCuyahoga Falls, OH.
Reynolds Manufacturing Co., IncRock Island, IL.
Rhode Island Centerless, IncJohnston, RI.
Rich Tool & Die CompanyScarborough, ME.
Richard Manufacturing CompanyMilford, CT.
Richard 0. Schulz CompanyElmwood Park, IL.
Richard Tool & Die CorporationNew Hudson, MI.
Richard's Grinding, IncCleveland, OH.
Richards Machine Tool CompanyLancaster, NY.
Richsal CorporationElyria, OH.
Rick Sanford Machine CompanySan Leandro, CA.
Rid-Lom Precision Tool CorpRochester, NY.
Ridge Machine & Welding CompanyToronto, OH.
Riggins Engineering, IncVan Nuys, CA.
Right Tool & Die, IncToledo, OH.
Rima EnterprisesHuntington Beach, CA.
Rite-Way Industries, IncLouisville, KY.
Riverview Machine Company, IncHolyoke, MA.
Riviera Tool CompanyGrand Rapids, MI.
Robert C. Reetz Company, IncPawtucket, RI.
Roberts Aerospace Mfg. & EngGardena, CA.
Roberts Tool & Die CompanyChillicothe, MO.
Roberts Tool Company, IncNorthridge, CA.
Robrad Tool & EngineeringMesa, AZ.
Rochester Gear, IncRochester, NY.
Rochester ManufacturingWellington, OH.
Rockburl Industries, IncRochester, NY.
Rockford Process Control, IncRockford, IL.
Rockford Tool & ManufacturingRockford, IL.
Rockford Toolcraft, IncRockford, IL.
Rockhill Machining IndustriesBarberton, OH.
Rockstedt Tool & DieBrunswick, OH.
Rocon Manufacturing CorporationRochester, NY.
Rogers Associates Machine ToolRochester, NY.
Romac Electronics, IncPlainview, NY.
Romold IncRochester, NY.
Ron Grob CompanyLoveland, CO.
Ronart Industries, IncDetroit, MI.
Ronlen Industries, IncBrunswick, OH.
Rons Racing Products, IncTucson, AZ.
Royal Wire Products, IncN. Royalton, OH.
Royalton Manufacturing, IncCleveland, OH.
Royster's Machine Shop, LLCHenderson, KY.
Rozal Industries, IncFarmingdale, NY.
RREN Manufacturing & EngineeringSpringfield, MA.
Rubbermaid, Inc., Mold DivisionWooster, OH.
Ruoff & Sons, IncRunnemede, NJ.
Russing Machining CorpGlendale, CA.
Ryan Industries IncYork, PA.
S & B Tool & Die Co., IncLancaster, PA.
S & R CNC MachiningArleta, CA.
S & R Precision Company, LLCFremont, CA.
S & S Precision Company, LLCSan Jose, CA.
Start Printed Page 21362
S. C. MachineChatsworth, CA.
S C ManufacturingAkron, OH.
S D S Machine, IncHayward, CA.
S G S Tool CompanyMunroe Falls, OH.
S L P Machine, IncHam Lake, MN.
S M K Fabricators, IncMay, TX.
S P M/AnaheimAnaheim, CA.
S P S TechnologiesSanta Ana, CA.
Saeibo Manufacturing IndustriesBlauvelt, NY.
Sage Machine & FabricatingHouston, TX.
Sagehill Engineering, IncMenlo Park, CA.
Saginaw Products CorporationSaginaw, MI.
Salomon Smith BarneyWashington, DC.
Samax Precision, IncSunnyvale, CA.
San Diego Swiss Machining, IncChula Vista, CA.
Sanders Tool & Mould CompanyHendersonville, TN.
Sandor Tool & Manufacturing CoLawrence, MA.
Sandy Bay MachineRockport, MA.
Santin Engineering, IncWest Peabody, MA.
Sattler Machine Products, IncSharon Center, OH.
Sawing Services CoChatsworth, CA.
SawtechLawrence, MA.
Schaffer Grinding Company, IncMontebello, CA.
Schill CorpToledo, OH.
Schlitter ToolWarren, MI.
Schmald Tool & Die, IncBurton, MI.
Schmiede CorporationTullahoma, TN.
Schneider & Marguard, IncNewton, NJ.
Schober's Machine & EngineeringAlhambra, CA.
Schoitz Engineering, IncWaterloo, IA.
Schroeder Tool & Die CorporationVan Nuys, CA.
Schuetz Tool & Die, IncHiawatha, KS.
Schulze Tool CompanyIndependence, MO.
Schwab Machine, IncSandusky, OH.
Schwartz Industries, IncWarren, MI.
Scott County Machine & Tool CoScottsburg, IN.
Seabury & Smith, IncMiami, FL.
Sebewaing Tool & Engineering CoSebewaing, MI.
Seemcor IncEnglewood, NJ.
Albert Seisler Machine CorpMohnton, PA.
Select Industrial Systems IncFairborn, OH.
Select Tool & Eng., IncElkhart, IN.
Select Tool & Die Tool DivDayton, OH.
SelfLubeCoopersville, MI.
Selzer Tool & Die, IncElyria, OH.
Sematool Mold & Die CoSanta Clara, CA.
Serrano Industries IncSanta Fe Springs, CA.
Service Manufacturing andAnaheim, CA.
Service Tool & Die, IncHenderson, KY.
Setters Tools, IncPiedmont, SC.
Sharon Center Mold & DieSharon Center, OH.
Shaw Industries, IncFranklin, PA.
Shear Tool, IncSaginaw, MI.
Sheets Tool & Manufacturing, IncSaegertown, PA.
Shelby Engineering Company, IncIndianapolis, IN.
Sherer ManufacturingClearwater, FL.
Sherlock Machine CompanyClearwater, FL.
The Sherman CorporationInglewood, CA.
Sherman Tool & GageErie, PA.
Shiloh IndustriesWellington, OH.
Shookus Special Tools, IncRaymond, NH.
Shop Tech Industrial Software CorpRocky Hill, CT.
Sibley Machine & Foundry CorpSouth Bend, IN.
Sieger Engineering, IncS. San Francisco, CA.
Sigma Precision Mfg., IncAston, PA.
Signa Molds & EngineeringSylmar, CA.
Signal Machine CompanyNew Holland, PA.
Silicon Valley MfgFremont, CA.
Sipco, IncMeadville, PA.
Sirius Enterprises, IncDallas, TX.
Six SigmaLouisville, KY.
Ski-Way Machine Products CompanyEuclid, OH.
Start Printed Page 21363
Skillcraft Machine Tool CompanyWest Hartford, CT.
Skulsky, IncGardena, CA.
Skyfab, IncDenton, TX.
Skyline Manufacturing CorpNashville, TN.
Skylon Mold & MachiningSugar Grove, PA.
Skyway Manufacturing CorporationPhoenix, AZ.
Smith-Renaud, IncCheshire, CT.
Smith's MachineCottondale, AL.
Smithfield Manufacturing, IncClarksville, TN.
Snyder SystemsBenicia, CA.
Solar Tool & Die, IncKansas City, MO.
Sonic Machine & Tool, IncTempe, AZ.
Sonoma Precision Mfg. CoSanta Rosa, CA.
Sonora Precision Molds, IncMi Wuk Village, CA.
South Bay MachiningSanta Clara, CA.
South Bend Form Tool CompanySouth Bend, IN.
South Eastern Machining, IncPiedmont, SC.
Southampton Manufacturing, IncFeasterville, PA.
Southeastern Technology, IncMurfreesboro, TN.
Southern Mfg. Technologies, IncTampa, FL.
Southwest Industrial ServicesFt. Worth, TX.
Southwest Manufacturing, IncWichita, KS.
Southwest Metalcraft CorporationTucson, AZ.
Southwest Mold, IncTempe, AZ.
Space City Machine & Tool CoHouston, TX.
Spalding & Day Tool & Die CoLouisville, KY.
Spark Technologies, IncSchenley, PA.
Spartak Products, IncHouston, TX.
Spartan Manufacturing CompanyGarden Grove, CA.
Specialty Machine & HydraulicsPleasantville, PA.
Spenco Machine & ManufacturingTemecula, CA.
Spike IndustriesNorth Lima, OH.
Spin Pro IncSunnyvale, CA.
Spiral Grinding CompanyCulver City, CA.
Spirex SouthwestGainesville, TX.
Springfield Tool & Die, IncGreenville, SC.
Sprint Tool & Die, IncMeadville, PA.
Spun Metals, IncPhoenix, AZ.
St. Louis Tool & MoldValley Park, MO.
StadcoLos Angeles, CA.
Standard Jig Boring Service, IncAkron, OH.
Standard Machine IncCleveland, OH.
Standard Welding & SteelMedina, OH.
Stanek Tool CorporationNew Berlin, WI.
Stanley Machining & Tool CorpCarpentersville, IL.
Star Tool & Die, IncElkhart, IN.
Star Tool & Engineering, IncRedwood City, CA.
Starn Tool & Manufacturing CoMeadville, PA.
State Industrial Products, IncPhoenix, AZ.
Stauble Machine & Tool CompanyLouisville, KY.
Stelted Manufacturing, IncTempe, AZ.
Sterling Engineering CorporationWinsted, CT.
Sterling Tool CompanyRacine, WI.
Stevens Manufacturing Co., IncMilford, CT.
Stewart Manufacturing CompanyPhoenix, AZ.
Stieg Grinding CorporationRockford, IL.
Stillion IndustriesAnn Arbor, MI.
Stillwater Technologies, IncTroy, OH.
Stines' Machine, IncVista, CA.
Ralph Stockton Valve ProductsHouston, TX.
Stoney Crest Regrind ServiceBridgeport, MI.
Strobel Machine, IncWorthington, PA.
Studwell Engineering, IncSun Valley, CA.
Subsea Ventures, IncHouston, TX.
Suburban Manufacturing CompanyEuclid, OH.
The Sullivan CorporationHartland, WI.
Summit Machine CompanyScottdale, PA.
Summit Precision, IncPhoenix, AZ.
Sun Polishing CorporationNorth Royalton, OH.
Sun Tool CompanyHouston, TX.
Sun Valley Tool, IncTempe, AZ.
Sunbelt Plastics, IncFrisco, TX.
Start Printed Page 21364
Sunrise Tool & Die, IncHenderson, KY.
Sunset Tool, IncSaint Joseph, MI.
Super Finishers IIPhoenix, AZ.
Superior Die Set CorporationOak Creek, WI.
Superior Die Tool Machine CoColumbus, OH.
Superior Gear Box CompanyStockton, MO.
Superior Jig, IncAnaheim, CA.
Superior Mold CompanyOntario, CA.
Superior Mold, IncClearwater, FL.
Superior Roll Forming CompanyValley City, OH.
Superior Thread Rolling Company, IncArleta, CA.
Superior Tool & Die CompanyBensalem, PA.
Superior Tool & Die Company, IncElkhart, IN.
Superior Tool, IncWillow Street, PA.
Supreme Tool & Die CompanyFenton, MO.
Surface ManufacturingAuburn, CA.
Svedala Pumps & ProcessColorado Springs, CO.
Swiss Wire E D MCosta Mesa, CA.
Swissco, IncBell Gardens, CA.
Synergis Technologies GroupGrand Rapids, MI.
Synergy Machine, IncKent, WA.
Syst-A-Matic Tool & DesignMeadville, PA.
Systems 3, IncTempe, AZ.
T & S Industrial Machining CorpWoburn, MA.
TCI Aluminum NorthHayward, CA.
T C I Precision MetalsGardena, CA.
T J Tool and MoldGuys Mills, PA.
T-K & Associates, IncLa Porte, IN.
T M Industries, IncEast Berlin, CT.
T M Machine & Tool, IncToledo, OH.
T M S IncLincoln, RI.
T-M Manufacturing CorporationSunnyvale, CA.
TAE CorporationKent, WA.
Tag Engineering, IncTucson, AZ.
Tait Design & Machine Company, IncManheim, PA.
Talbar, IncMeadville, PA.
Talcott Machine Products, IncMeriden, CT.
Talent Tool & Die, IncBerea, OH.
Tana CorporationToledo, OH.
Tangent Tool, IncFraser, MI.
Tanner Oil Tools IncHouston, TX.
Tapco USA, IncLoves Park, IL.
Taurus Tool & Engineering, IncMuncie, IN.
Tebben EnterprisesClara City, MN.
Tech-Etch, IncPlymouth, MA.
Tech Industries, IncCleveland, OH.
Tech Manufacturing CompanyWright City, MO.
Tech Mold, IncTempe, AZ.
Tech Ridge, IncSouth Chelmsford, MA.
Tech Tool & Mold, IncMeadville, PA.
Tech Tool and Machine IncToledo, OH.
Tech Tool, IncDetroit, MI.
Tech-Machine, IncColorado Springs, CO.
Techmetals, IncDayton, OH.
Techni-Cast CorporationSouth Gate, CA.
Techni-Products, IncEast Longmeadow, MA.
Technics 2000 IncOlathe, KS.
Technodic, IncProvidence, RI.
TecoMetrix, LLCTempe, AZ.
Tedco, IncCranston, RI.
Teke Machine CorpRochester, NY.
Tell Tool, IncWestfield, MA.
Temco CorporationDanvers, MA.
Tenk Machine & Tool CompanyCleveland, OH.
Tennessee Metal Works, IncNashville, TN.
Tennessee Tool CorporationCharlotte, TN.
Terrell Manufacturing IncStrongsville, OH.
Testand CorporationPawtucket, RI.
Tetco, IncPlainville, CT.
Teter Tool & Die, IncLa Porte, IN.
Texas Honing, IncPearland, TX.
Thaler Machine CompanyDayton, OH.
Start Printed Page 21365
The Goforth CorpFremont, CA.
Therm, IncIthaca, NY.
Thiel Tool & Engineering CoSt. Louis, MO.
Thomas Machine Works, IncNewburyport, MA.
Pleasanton Tool and ManufacturingPleasanton, CA.
Thompson Gundrilling, IncVan Nuys, CA.
Thor Tool CorporationSan Leandro, CA.
Thornhurst Manufacturing, IncTampa, FL.
Three-Way Pattern, IncWichita, KS.
Time Machine & Stamping, IncPhoenix, AZ.
The Timken CompanyCanton, OH.
Timon Tool & Die CoToledo, OH.
Tipco Punch, IncHamilton, OH.
Tipp Machine & Tool, IncTipp City, OH.
Tisza Industries, IncNiles, MI.
Titan, IncSturtevant, WI.
TLT-Babcock, IncAkron, OH.
TMK Manufacturing IncCampbell, CA.
Toledo Blank, IncToledo, OH.
Toledo Molding & Die IncToledo, OH.
Tolerance Masters, IncCircle Pines, MN.
Tomak PrecisionLebanon, OH.
TomKen Tool & Engineering, IncMuncie, IN.
Tool Gauge & Machine Works, IncTacoma, WA.
Tool Mate CorporationCincinnati, OH.
Tool Specialties CompanyHazelwood, MO.
Tool Specialty CompanyLos Angeles, CA.
Tool Steel Service ofLos Angeles, CA.
Tool Tech CorporationSan Jose, CA.
Tool Tech, IncSpringfield, OH.
Tool Technology, IncDanvers, MA.
Tool Technology, IncCookeville, TN.
Tool-Matic Company, IncCity of Commerce, CA.
Toolcomp Tooling & ComponentsToledo, OH.
Toolcraft of Phoenix, IncGlendale, AZ.
Toolcraft Products, IncDayton, OH.
Toolex, IncHouston, TX.
Tools, IncSussex, WI.
Tools Renewal CompanyBirmingham, AL.
Top Tool & Die, IncCleveland, OH.
Top Tool CompanyMinneapolis, MN.
Totally Radical Associates, IncPlacentia, CA.
Toth Industries, IncToledo, OH.
Toth TechnologiesCherry Hill, NJ.
Tower Tool & Engineering, IncMachesney Park, IL.
Trace-A-Matic CorporationBrookfield, WI.
Tracer Tool & Die Company IncGrand Rapids, MI.
Trademark Die & EngineeringBelmont, MI.
Tram Tek IncPhoenix, AZ.
Trans-World Electric IncPort Arthur, TX.
Treblig, IncGreenville, SC.
Trec Industries, IncBrooklyn Heights, OH.
Tree City Mold & Machine Co., IncKent, OH.
Treffers Precision, IncPhoenix, AZ.
Tresco Tool, IncGuys Mills, PA.
Tn Craft, IncMiddleberg Heights, OH.
Tn J Machine Company, IncGardena, CA.
Tn-City Machine Products, IncPeoria, IL.
Tn-City Tool & Die, IncBay City, MI.
Tri-M-Mold, IncStevensville, MI.
Tn-Wire, IncRockford, IL.
Triad Plastic TechnologiesReno, NV.
Triangle Mold & Machine Co. IncHartville, OH.
Triangle Tool CompanyErie, PA.
Tricon Machine & Tool, IncRochester, NY.
Tricore Mold & DieMachesney Park, IL.
Tridecs CorporationHayward, CA.
Trident Precision ManufacturingWebster, NY.
Trig AerospaceSanta Ana, CA.
Trimac Manufacturing, IncSanta Clara, CA.
Trimetric Specialties, IncNewark, CA.
Trimline Tool, IncGrandville, MI.
Start Printed Page 21366
Trinity Tools, IncNorth Tonawanda, NY.
Trio Tool & Die, IncHawthorne, CA.
Triple Quality Tool & Die, IncBell, CA.
Triple-T Cutting Tools IncWest Berlin, NJ.
Triplett Machine, IncPhelps, NY.
Triumph Precision, IncPhoenix, AZ.
Trojan Mfg. Co. IncPiqua, OH.
Trotwood CorporationTrotwood, OH.
Tru Cut, IncSebring, OH.
Tru Form Manufacturing Corp.Rochester, NY.
Tru Tool, IncSturtevant, WI.
True Cut EDM IncGarland, TX.
True Position, IncChatsworth, CA.
True-Tech CorporationFremont, CA.
Trueline Tool & Machine, IncSpringfield, OH.
Trust TechnologiesWilloughby, OH.
Trutron CorporationTroy, MI.
Tschida Engineering, IncNapa, CA.
Tucker Machine CompanyNorth Branford, CT.
Turbo Machine & Tool, IncCleveland, OH.
Turn-Tech, IncDecker Prairie, TX.
Turner and Walima Mfg. Co., IncEssex, MA.
Turner's Machine ShopPhoenix, AZ.
Twin City Plating CompanyMinneapolis, MN.
Two-M Precision Co., IncWilloughby, OH.
Tymar Precision IncSanta Clara, CA.
U C 0 Tool & Die, IncUnion City, OH.
U F E IncorporatedStillwater, MN.
U M C, IncHamel, MN.
U P Machine & Engineering Co.Powers, MI.
USAeroteamDayton, OH.
U S Machine & Tool, IncMurfreesboro, TN.
UddeholmSanta Fe Springs, CA.
Ugm, IncSanta Clara, CA.
Ultra Precision, IncFreeport, PA.
Ultra Stamping & Assembly, IncRockford, IL.
Ultra Tool & Manufacturing, IncMenomonee Falls, WI.
Ultra-Tech, IncKansas City, KS.
Ultramation, IncWaco, TX.
UltronLong Beach, CA.
Uneco Manufacturing, IncChicopee, MA.
Unigraphics SolutionsBrookfield, WI.
Unique Machine CompanyMontgomeryville, PA.
Unique Tool & ManufacturingRandleman, NC.
Unitech, IncKansas City, MO.
United Centerless GrindingEast Hartford, CT.
United Engineering CompanyKernersville, NC.
United Machine Co., IncWichita, KS.
The United Plastics Group, IncLudlow, MA.
United States Fittings, IncWarrensville Heights, OH.
United Tool & Engineering CoSouth Beloit, IL.
United Tool & Engineering, IncMishawaka, IN.
United Tool & Mold IncHolland, MI.
Universal Brixius IncMilwaukee, WI.
Universal Custom Process, IncStreetsboro, OH.
Universal Precision Products IncAkron, OH.
Universal Tool CompanyDayton, OH.
Universal Tools & ManufacturingSpringfield, NJ.
Universe IndustriesIrvine, CA.
Upland Fab, IncOntario, CA.
V & M Tool Company, IncPerkasie, PA.
V & S Die & Mold, IncLakewood, OH.
V A Machine & Tools, IncBroussard, LA.
V Ash Machine CompanyCleveland, OH.
V I Mfg.Webster, NY.
V P. C, IncBerea, OH.
Valley Machine Works, IncPhoenix, AZ.
Valley Tool & Die, IncNorth Royalton, OH.
Valley Tool Room, IncPhoenix, AZ.
Valv-Trol CompanyStow, OH.
Van EngineeringCincinnati, OH.
Van Os Machine Works, IncSt. Louis, MO.
Start Printed Page 21367
Van Reenen Tool & Die, IncRochester, NY.
Van-Am Tool & Engineering, IncSt. Joseph, MO.
Vanderveer Industrial PlasticsPlacentia, CA.
Vanpro, IncCambridge, MN.
Vaughn Manufacturing CompanyNashville, TN.
Vektek, IncEmporia, KS.
Venango Machine Products, IncReno, PA.
Venture Precision Machining CoChampaign, IL.
Venture Tool, IncErie, PA.
Ver-Sa-Til Associates, IncChanhassen, MN.
VersaTool & Die MachiningBeloit, WI.
Vi-Tec Manufacturing IncLivermore, CA.
Viking Tool & EngineeringWhitehall, MI.
Viking Tool & Gage, IncConneaut Lake, PA.
Vistek Precision Machine CompanyIvyland, PA.
Vitron Manufacturing, IncPhoenix, AZ.
Vitullo & Associates, IncWarren, MI.
Vobeda Machine & Tool CompanyRacine, WI.
Vulcan Tool CorporationDayton, OH.
W + D Machinery Company, IncOverland Park, KS.
W & H Stampings & Fineblanking, IncHauppauge, NY.
W D & J Machine & Engineering IncFullerton, CA.
W E C Technologies CorporationAmityville, NY.
W G Strohwig Tool & Die, IncRichfield, WI.
WSI Industries, IncMinneapolis, MN.
W W G, IncIndianapolis, IN.
WADKO Precision, IncHouston, TX.
Wagner Engineering, IncGilbert, AZ.
Waiteco MachineActon, MA.
Wajo Tool and Die, IncEast Hampstead, NH.
Walker CorporationOntario, CA.
Walker Tool & Machine CompanyPerrysburg, OH.
Wallner Tooling/Expac, IncRancho Cucamonga, CA.
Waltco Engineering, IncGardena, CA.
Walter Tool & Mfg. IncElgin, IL.
Walter Waukesha, IncWaukesha, WI.
Walz & Krenzer, IncRochester, NY.
Warmelin Precision ProductsHawthorne, CA.
Waukesha Tool & Stamping IncSussex, WI.
Wausau Insurance CompaniesWausau, WI.
Wayne Manufacturing, IncBoulder, CO.
Webco Machine Products, IncValley View, OH.
Weco Metal ProductsOntario, NY.
Weiss-Aug Co. IncEast Hanover, NJ.
Wejco Instruments IncHouston, TX.
George Welsch & Son CompanyCleveland, OH.
Weltek-SwissEnglewood, CO.
Wemco Precision Tool, IncMeadville, PA.
Wentworth CompanyGlastonbury, CT.
Werkema Machine Company, IncGrand Rapids, MI.
Wes ProductsMadison Heights, MI.
West Hartford Tool & Die CompanyNewington, CT.
West Pharmaceutical ServicesErie, PA.
West Tool & Manufacturing, IncCleveland, OH.
West Valley Milling, IncChatsworth, CA.
West Valley Precision IncSanta Clara, CA.
Westbrook Manufacturing, IncDayton, OH.
Western Mass. MechTech, IncWare, MA.
Western Steel Cutting, IncSan Jose, CA.
Western Tap Manufacturing CoBuena Park, CA.
Westfield Gage Company, IncWestfield, MA.
Westfield Tool & Die, IncWestfield, MA.
Westlake Tool & Die Mfg.Avon, OH.
Westtool IncPhoenix, AZ.
White Machine, IncNorth Kingstown, RI.
White Machine, IncNorth Royalton, OH.
Whitehead Tool & Design, IncGuys Mills, PA.
Wiegel Tool Works, IncWood Dale, IL.
Wightman Engineering ServicesSanta Clara, CA.
Wilco Die Tool Machine CompanyMaryland Heights, MO.
Wilkinson Mfg., IncSanta Clara, CA.
The Will-Burt CompanyOrrville, OH.
Start Printed Page 21368
Willer Tool CorporationJackson, WI.
William Sopko & Sons Co., IncCleveland, OH.
Williams EngineeringChatsworth, CA.
Williams Machine, IncLake Elsinore, CA.
Windsor Tool & Die, IncCleveland, OH.
Winter's Grinding ServiceMenomonee Falls, WI.
Wire Cut Company, IncBuena Park, CA.
Wire Tech E D M, IncLos Alamitos, CA.
WireCut E D M, IncDallas, TX.
Wirecut Technologies IncIndianapolis, IN.
Wiretec, IncDelmont, PA.
Wisconsin Engraving CompanyNew Berlin, WI.
Wisconsin Metalworking MachineryWaukesha, WI.
Wisconsin Mold Builders, LLCWaukesha, WI.
Wise Machine Co., IncButler, PA.
Wolfe Engineering, IncCampbell, CA.
Wolverine Bronze CompanyRoseville, MI.
Wolverine Tool & EngineeringBelmont, MI.
Wolverine Tool CompanySt. Clair Shores, MI.
Woodruff CorporationTorrance, CA.
Wright Brothers WeldingHollister, CA.
Wright Industries, IncGilbert, AZ.
Wright-K Technology, IncSaginaw, MI.
X L I CorporationRochester, NY.
Yates Tool, IncMedina, OH.
Yoder Die Casting CorporationDayton, OH.
Youngberg Industries, IncBelvidere, IL.
Youngers and Sons ManufacturingViola, KS.
Youngstown Plastic ToolingYoungstown, OH.
Z & Z Machine Products IncRacine, WI.
Z M D Mold & Die IncMentor, OH.
Zip Tool & Die Co., IncCleveland, OH.
Zircon Precision Products, IncTempe, AZ.
Zuelzke Tool & EngineeringMilwaukee, WI
End Supplemental Information

BILLING CODE 3510-D-R-F

[FR Doc. 01-10646 Filed 4-27-01; 8:45 am]

BILLING CODE 3510-DR-P