Federal Aviation Administration (FAA), DOT.
Notice of new task assignment for the Aviation Rulemaking Advisory Committee (ARAC).
The FAA assigned the Aviation Rulemaking Advisory Committee a new task to evaluate and develop requirements for improved handling of stall characteristics in small airplanes. This notice is to inform the public of this ARAC activity.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Mike Dahl, Federal Aviation Administration, Central Region Headquarters, 901 Locust, Kansas City, Missouri 64106, (816) 329-4110. Mike.email@example.com.End Further Info End Preamble Start Supplemental Information
The FAA established the Aviation Rulemaking Advisory Committee to provide advice and recommendations to the FAA Administrator on the FAA's rulemaking activities with respect to aviation-related issues. This includes obtaining advice and recommendations on the FAA's commitments to harmonize Title 14 of the Code of Federal Regulations (14 CFR) with its partners in Europe and Canada.
- Review Subpart B of part 23 and develop requirements for improved handling of stall characteristics in small airplanes. Items to be addressed in the ARAC review include:
1. Stall Characteristics and spin resistance.
2. Stall accidents and prevention methods.
3. Harmonization with similar requirements found in JAR-23.
- Prepare a draft Notice of Proposed Rulemaking (NPRM). The NPRM should include the preamble and rule language along with any supporting legal analysis.
Schedule: This task is to be completed no later than December 10, 2001.
ARAC Acceptance of Task
ARAC accepted the task and assigned the task to the newly formed Stall Characteristics Harmonization Working Group, General Aviation Certification and Operations Issues. The working group will serve as staff to ARAC and assist in the analysis of the assigned task. ARAC must review and approve the working group's recommendations. If ARAC accepts the working group's recommendations, it will forward them to the FAA. Recommendations that are received from ARAC will be submitted to the agency's Rulemaking Management Council to address the availability of resources and prioritization.Start Printed Page 30500
Working Group Activity
The Stall Characteristics harmonization Working Group is expected to comply with the procedures adopted by ARAC. As part of the procedures, the working group is expected to:
1. Recommend a work plan for completion of the task, including the rationale supporting such a plan for consideration at the next meeting of the ARAC on general aviation certification and operations issues held following publication of this notice.
2. Give a detailed conceptual presentation of the proposed recommendations prior to proceeding with the work stated in item 3 below.
3. Draft the appropriate documents and required analyses and/or any other related materials or documents.
4. Provide a status report at each meeting of the ARAC held to consider general aviation certification and operations issues.
Participation in the Working Group
The Stall Characteristics Harmonization Working Group will be composed of technical experts having an interest in the assigned task. A working group member need not be a representative or a member of the full committee.
An individual who has expertise in the subject matter and wishes to become a member of the working group should write to the person listed under the caption FOR FURTHER INFORMATION CONTACT expressing that desire, describing his or her interest in the task, and stating the expertise he or she would bring to the working group. All requests to participate must be received no later than June 29, 2001. The requests will be reviewed by the co-assistant chairs, the co-assistant executive directors, and the working group co-chairs. Individuals will be advised whether or not their request can be accommodated.
Individuals chosen for membership on the working group will be expected to represent their aviation community segment and actively participate in the working group (e.g., attend all meetings, provide written comments when requested to do so, etc.). They also will be expected to devote the resources necessary to support the working group in meeting any assigned deadlines. Members are expected to keep their management chain and those they may represent advised of working group activities and decisions to ensure that the proposed technical solutions do not conflict with their sponsoring organization's position when the subject being negotiated is presented to ARAC for approval.
Once the working group has begun deliberations, members will not be added or substituted without the approval of the co-assistant chairs, the co-assistant executive directors, and the working group co-chairs.
The Secretary of Transportation determined that the formation and use of the ARAC is necessary and in the public interest in connection with the performance of duties imposed on the FAA by law.
Meetings of the ARAC will be open to the public. Meetings of the Stall Characteristics Harmonization Working Group will not be open to the public, except to the extent that individuals with an interest and expertise are selected to participate. The FAA will make no public announcement of working group meetings.Start Signature
Issued in Washington, DC, on June 1, 2001.
Anthony F. Fazio,
Executive Director, Aviation Rulemaking Advisory Committee.
[FR Doc. 01-14234 Filed 6-5-01; 8:45 am]
BILLING CODE 4410-13-M