Import Administration, International Trade Administration, Department of Commerce.
Notice of antidumping duty order.
November 29, 2001.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Carrie Blozy, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0165.
The Applicable Statute
Unless otherwise indicated, all citations to the statute are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Tariff Act of 1930 (“the Act”) by the Uruguay Round Agreements Act. In addition, unless otherwise indicated, all citations to the Department's regulations are to the regulations at 19 CFR part 351 (2001).
Scope of Order
The products covered by this antidumping duty order are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this investigation.
Specifically included within the scope of this order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products to be included in the scope of this order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of this order unless otherwise excluded. The following products, for example, are outside or specifically excluded from the scope of this order:
- Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506).
- Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher.
- Ball bearing steels, as defined in the HTSUS.
- Tool steels, as defined in the HTSUS.
- Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
- ASTM specifications A710 and A736.
- USS abrasion-resistant steels (USS AR 400, USS AR 500).
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
The merchandise subject to this order is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7184.108.40.206, 7220.127.116.11, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 718.104.22.168, 722.214.171.124, and 7126.96.36.199. Certain hot-rolled carbon steel flat products covered by this order, including: Vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7188.8.131.52, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7184.108.40.206, 7220.127.116.11, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and U.S. Customs purposes, the written description of the merchandise is dispositive. Start Printed Page 59562
Antidumping Duty Order
In accordance with section 735(a) of the Act, the Department made its final determination that hot-rolled carbon steel flat products from the People's Republic of China (“PRC”) is being sold at less than fair value. See Notice of Final Determination of Sales at Less Than Fair Value: Hot-Rolled Carbon Steel Flat Products From The People's Republic of China, 66 FR 49632 (September 28, 2001).
On November 13, 2001, in accordance with section 735(d) of the Act, the International Trade Commission (“the Commission”) notified the Department of its final determination pursuant to section 735(b)(1)(A)(e) of the Act that an industry in the United States is materially injured by reason of less-than-fair-value imports of subject merchandise from the PRC. Therefore, in accordance with section 736(a)(1) of the Act, the Department will direct U.S. Customs to assess, upon further advice by the Department, antidumping duties equal to the amount by which the normal value of the merchandise exceeds the export price of the merchandise for all relevant entries of hot rolled steel from the PRC. These antidumping duties will be assessed on all unliquidated entries of hot rolled steel from the PRC entered, or withdrawn from the warehouse, for consumption on or after May 3, 2001, the date on which the Department published its Notice of Preliminary Determination of Sales at Less Than Fair Value: Hot-Rolled Carbon Steel Flat Products From The People's Republic of China (66 FR 22183). Customs must require, at the same time as importers would normally deposit estimated duties on this merchandise, a cash deposit equal to the estimated weighted-average antidumping duty margins as noted below. The “PRC-wide” rate applies to all exporters of subject merchandise not specifically listed. The weighted-average dumping margins are as follows:
|Manufacturer/exporter||Weighted-average margin (In percent)|
|Angang Group International Trade Corporation||69.85|
|Shanghai Baosteel Group Corporation||64.20|
|Benxi Iron & Steel Group Co., Ltd.||90.83|
|Panzhihua Iron & Steel (Group) Company||65.59|
|Wuhan Iron & Steel Group Corporation||65.59|
This notice constitutes the antidumping duty order with respect to hot rolled steel from the PRC pursuant to section 735(a) of the Act. Interested parties may contact the Department's Central Records Unit, Room B-099 of the main Commerce building, for copies of an updated list of antidumping duty orders currently in effect.
This order is published in accordance with section 736(a) of the Act and 19 CFR 351.211.Start Signature
Dated: November 20, 2001.
Assistant Secretary for Import Administration.
[FR Doc. 01-29666 Filed 11-28-01; 8:45 am]
BILLING CODE 3510-DS-P