Import Administration, International Trade Administration, Department of Commerce.
December 3, 2001.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Sally C. Gannon at (202) 482-0162, Mark Hoadley at (202) 482-0666, or Julio Fernandez at (202) 482-0190, Office of AD/CVD Enforcement VII, Group III, Import Administration, International Trade Administration, U.S. Department of Commerce, Room 7866, 14th Street and Constitution Avenue, NW., Washington, DC 20230.
The Applicable Statute and Regulations
Unless otherwise indicated, all citations to the statute are references to the Tariff Act of 1930 (the Act), as amended. In addition, unless otherwise indicated, all citations to the Department's regulations are to the regulations codified at 19 CFR part 351 (2000).
Scope of Order
The merchandise subject to this investigation is certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths, of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this investigation.
Specifically included within the scope of this investigation are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products included in the scope of this investigation, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical descriptions provided above are within the scope of this investigation unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this investigation:
- Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506).
- Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher.
- Ball bearings steels, as defined in the HTSUS.
- Tool steels, as defined in the HTSUS.
- Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
- ASTM specifications A710 and A736.
- USS Abrasion-resistant steels (USS AR 400, USS AR 500).
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
The merchandise subject to this investigation is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7126.96.36.199, 7188.8.131.52, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7184.108.40.206, 7220.127.116.11, and 718.104.22.168. Certain hot-rolled carbon steel flat products covered by this investigation, including vacuum degassed fully stabilized, high strength low alloy, and the substrate for motor lamination steel, may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 722.214.171.124, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7126.96.36.199, 7188.8.131.52, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and U.S. Customs purposes, the Department's written description of the merchandise under investigation is dispositive.
Countervailing Duty Order
In accordance with section 705(d) of the Act, on October 3, 2001, the Department published in the Federal Register its final affirmative determination in the countervailing duty investigation of certain hot-rolled carbon steel flat products from South Africa (66 FR 50412). On November 13, 2001, the International Trade Commission (ITC) notified the Department of its final determination, pursuant to section 705(b)(1)(A)(i) of the Act, that an industry in the United States is materially injured by reason of imports of certain hot-rolled carbon steel flat products from South Africa.
Therefore, countervailing duties will be assessed on all unliquidated entries of certain hot-rolled carbon steel flat products from South Africa entered, or withdrawn from warehouse, for consumption on or after April 20, 2001, the date on which the Department Start Printed Page 60202published its preliminary countervailing duty determination in the Federal Register, and before August 18, 2001, the date on which the Department instructed the U.S. Customs Service to terminate the suspension of liquidation in accordance with section 703(d) of the Act, and on all entries and withdrawals on or after the date of publication of this countervailing duty order in the Federal Register. Section 703(d) of the Act states that the suspension of liquidation pursuant to a preliminary determination may not remain in effect for longer than four months. Entries of certain hot-rolled carbon steel flat products made on or after August 18, 2001, and prior to the date of publication of this order in the Federal Register are not liable for the assessment of countervailing duties as a result of the Department's termination, effective August 18, 2001, of the suspension of liquidation.
In accordance with section 706 of the Act, the Department will direct U.S. Customs (Customs) to reinstate the suspension of liquidation effective on the date of publication of this notice in the Federal Register and to assess, upon further advice by the Department pursuant to section 706(a)(1) of the Act, countervailing duties for each entry of the subject merchandise in an amount based on the countervailable subsidy rate for the subject merchandise. In its instructions, the Department will direct Customs to exclude Highveld Steel and Vanadium Corporation Limited (Highveld), which received a de minimis subsidy rate in the Department's final determination, from this reinstatement of the suspension of liquidation and any subsequent assessment of countervailing duties.
On or after the date of publication of this notice in the Federal Register, Customs must require, at the same time as importers would normally deposit estimated duties on this merchandise, a cash deposit equal to the countervailable subsidy rates noted below. The “All Others” rate applies to all producers and exporters, except for Highveld, of certain hot-rolled carbon steel flat products from South Africa not specifically listed below. The cash deposit rates are as follows:
|Producer/exporter||Net subsidy rate|
|Saldanha Steel/Iscor||5.76% Ad Valorem.|
|All Others||5.76% Ad Valorem.|
This notice constitutes the countervailing duty order with respect to certain hot-rolled carbon steel flat products from South Africa, pursuant to section 706(a) of the Act. Interested parties may contact the Central Records Unit, for copies of an updated list of countervailing duty orders currently in effect.
This countervailing duty order is published in accordance with section 706(a) of the Act and 19 CFR 351.211.Start Signature
Dated: November 26, 2001.
Richard W. Moreland,
Acting Assistant Secretary for Import Administration.
[FR Doc. 01-29813 Filed 11-30-01; 8:45 am]
BILLING CODE 3510-DS-P