This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
Import Administration, International Trade Administration, Department of Commerce.
Notice of final results of antidumping duty administrative review.
On October 9, 2001, the Department of Commerce published the preliminary results of the administrative review of the antidumping duty order on large newspaper printing presses and components thereof, whether assembled or unassembled, from Germany. The review covers MAN Roland Druckmaschinen AG, a manufacturer/exporter of the subject merchandise to the United States. The period of review is September 1, 1999, through August 31, 2000.
No interested party submitted comments on our preliminary results. We have made no changes to the margin calculation. Therefore, the final results do not differ from the preliminary results. The final weighted-average dumping margin for MAN Roland Druckmaschinen AG is listed below in the “Final Results of Review” section of this notice.
January 16, 2002.Start Further Info
FOR FURTHER INFORMATION CONTACT:
David J. Goldberger, or Kate Johnson, Office 2, AD/CVD Enforcement Group I, Import Administration-Room B099, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-4136, or 482-4929, respectively.End Further Info End Preamble Start Supplemental Information
The Applicable Statute
Unless otherwise indicated, all citations to the Tariff Act of 1930, as amended (the Act), are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Act by the Uruguay Round Agreements Act (URAA). In addition, unless otherwise indicated, all citations to the Department of Commerce's (the Department's) regulations are to 19 CFR part 351 (April 2000). Start Printed Page 2193
This review covers one manufacturer/exporter, MAN Roland Druckmaschinen AG (MAN Roland).
On October 9, 2001, the Department of Commerce published in the Federal Register the preliminary results of administrative review of the antidumping duty order on large newspaper printing presses (LNPP) and components thereof, whether assembled or unassembled, from Germany (66 FR 51375) (Preliminary Results).
We invited parties to comment on the preliminary results of the review. MAN Roland submitted a case brief on November 8, 2001. On November 29, 2001, MAN Roland withdrew its case brief from the record of this review. No other interested party submitted comments. The Department has conducted this administrative review in accordance with section 751 of the Act.
Scope of the Order
The products covered by the order are large newspaper printing presses, including press systems, press additions and press components, whether assembled or unassembled, whether complete or incomplete, that are capable of printing or otherwise manipulating a roll of paper more than two pages across. A page is defined as a newspaper broadsheet page in which the lines of type are printed perpendicular to the running of the direction of the paper or a newspaper tabloid page with lines of type parallel to the running of the direction of the paper.
In addition to press systems, the scope of the order includes the five press system components. They are: (1) A printing unit, which is any component that prints in monocolor, spot color and/or process (full) color; (2) a reel tension paster (RTP), which is any component that feeds a roll of paper more than two newspaper broadsheet pages in width into a subject printing unit; (3) a folder, which is a module or combination of modules capable of cutting, folding, and/or delivering the paper from a roll or rolls of newspaper broadsheet paper more than two pages in width into a newspaper format; (4) conveyance and access apparatus capable of manipulating a roll of paper more than two newspaper broadsheet pages across through the production process and which provides structural support and access; and (5) a computerized control system, which is any computer equipment and/or software designed specifically to control, monitor, adjust, and coordinate the functions and operations of large newspaper printing presses or press components.
A press addition is comprised of a union of one or more of the press components defined above and the equipment necessary to integrate such components into an existing press system.
Because of their size, large newspaper printing press systems, press additions, and press components are typically shipped either partially assembled or unassembled, complete or incomplete, and are assembled and/or completed prior to and/or during the installation process in the United States. Any of the five components, or collection of components, the use of which is to fulfill a contract for large newspaper printing press systems, press additions, or press components, regardless of degree of assembly and/or degree of combination with non-subject elements before or after importation, is included in the scope of this order. Also included in the scope are elements of a LNPP system, addition or component, which taken altogether, constitute at least 50 percent of the cost of manufacture of any of the five major LNPP components of which they are a part.
For purposes of the order, the following definitions apply irrespective of any different definition that may be found in Customs rulings, U.S. Customs law or the Harmonized Tariff Schedule of the United States (HTSUS): (1) The term “unassembled” means fully or partially unassembled or disassembled; and (2) the term “incomplete” means lacking one or more elements with which the LNPP is intended to be equipped in order to fulfill a contract for a LNPP system, addition or component.
This scope does not cover spare or replacement parts. Spare or replacement parts imported pursuant to a LNPP contract, which are not integral to the original start-up and operation of the LNPP, and are separately identified and valued in a LNPP contract, whether or not shipped in combination with covered merchandise, are excluded from the scope of this order. Used presses are also not subject to this scope. Used presses are those that have been previously sold in an arm's-length transaction to a purchaser that used them to produce newspapers in the ordinary course of business.
Further, this order covers all current and future printing technologies capable of printing newspapers, including, but not limited to, lithographic (offset or direct), flexographic, and letterpress systems. The products covered by this order are imported into the United States under subheadings 8443.11.10, 8443.11.50, 8443.30.00, 8443.59.50, 8443.60.00, and 8443.90.50 of the HTSUS. Large newspaper printing presses may also enter under HTSUS subheadings 8443.21.00 and 8443.40.00. Large newspaper printing press computerized control systems may enter under HTSUS subheadings 8471.49.10, 8471.49.21, 8471.49.26, 8471.50.40, 8471.50.80, and 8537.10.90. Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of the order is dispositive.
On September 29, 2000, the petitioner requested that the Department determine whether antidumping duties had been absorbed during the period of review. Section 751(a)(4) of the Act provides for the Department, if requested, to determine during an administrative review initiated two or four years after the publication of the order, whether antidumping duties have been absorbed by a foreign producer or exporter, if the subject merchandise is sold in the United States through an affiliated importer. In this case, MAN Roland sold to the United States through an importer that is affiliated within the meaning of section 771(33) of the Act.
Because this review was initiated four years after the publication of the antidumping duty order, we will make a duty absorption determination in this segment of the proceeding. As we have found that there is no dumping margin for MAN Roland with respect to its U.S. sales, we have also found that there is no duty absorption for purposes of the final results.
Final Results of the Review
Our final results remain unchanged from the preliminary results. The following weighted-average margin percentage applies to MAN Roland for the period September 1, 1999, through August 31, 2000:
|MAN Roland Druckmaschinen AG.||9/1/99-8/31/00|
The Department shall determine, and the Customs Service shall assess, antidumping duties on all appropriate entries. The Department will issue appraisement instructions directly to the Customs Service. In accordance with 19 CFR 351.106(c)(2), we will instruct the Customs Service to liquidate without regard to antidumping duties all entries of the subject merchandise for which the importer-specific assessment rate is zero or de minimis (i.e., less than 0.50 percent).
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
Cash Deposit Requirements
The following deposit requirements shall be effective for all shipments of the subject merchandise from Germany that are entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided for by section 751(a)(1) of the Act: (1) The cash deposit rate for MAN Roland will be the rate established above in the “Final Results of the Review” section; (2) for previously investigated companies not listed above, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, or the original investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters of this merchandise will continue to be 30.72 percent, the all others rate made effective by the less-than-fair-value investigation. These requirements, when imposed, shall remain in effect until publication of the final results of the next administrative review.
This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulation and the terms of an APO is a sanctionable violation.
This administrative review and notice are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.221.Start Signature
Dated: January 9, 2002.
Assistant Secretary for Import Administration.
[FR Doc. 02-1131 Filed 1-15-02; 8:45 am]
BILLING CODE 3510-DS-P