This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
United States International Trade Commission.
Scheduling of the final phase of an antidumping investigation.
The Commission hereby gives notice of the scheduling of the final phase of antidumping investigation No. 731-TA-943 (Final) under section 735(b) of the Tariff Act of 1930 (19 U.S.C. 1673d(b)) (the Act) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of less-than-fair-value imports from China of circular welded non-alloy steel pipe, provided for in subheadings 7306.30.10 and 7306.30.50 of the Harmonized Tariff Schedule of the United States.
For further information concerning the conduct of this phase of the investigation, hearing procedures, and rules of general application, consult the Commission's rules of practice and procedure, part 201, subparts A through E (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).
December 31, 2001.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Sioban Maguire (202-708-4721), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its Internet server (http://www.usitc.gov). The public record for this investigation may be viewed on the Commission's electronic docket (EDIS-ON-LINE) at http://dockets.usitc.gov/eol/public.End Further Info End Preamble Start Supplemental Information
Background.—The final phase of this investigation is being scheduled as a result of an affirmative preliminary determination by the Department of Commerce that imports of certain circular welded carbon quality steel pipe from China are being sold in the United States at less than fair value within the meaning of section 733 of the Act (19 U.S.C. 1673b). The investigation was requested in a petition filed on May 24, 2001, by Allied Tube & Conduit Corp., Harvey, IL; IPSCO Tubulars, Inc., Camanche, IA; LTV Copperweld, Youngstown, OH; Northwest Pipe Co., Portland, OR; Western Tube & Conduit Corp., Long Beach, CA; Century Tube Corp., Pine Bluff, AR; Laclede Steel Co., St. Louis, MO; Maverick Tube Corp., Chesterfield, MO; Sharon Tube Co., Sharon, PA; Wheatland Tube Co., Wheatland, PA; and the United Steelworkers of America, AFL-CIO.
Participation in the investigation and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of this investigation as parties must file an entry of appearance with the Secretary to the Commission, as provided in §201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigation need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigation.
Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to §207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of this investigation available to authorized applicants under the APO issued in the investigation, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. § 1677(9), who are parties to the investigation. A party granted access to BPI in the preliminary phase of the investigation need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.
Staff report.—The prehearing staff report in the final phase of this investigation will be placed in the nonpublic record on May 6, 2002, and a public version will be issued thereafter, pursuant to §207.22 of the Commission's rules.
Hearing.—The Commission will hold a hearing in connection with the final phase of this investigation beginning at 9:30 a.m. on May 17, 2002 at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before May 9, 2002. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference Start Printed Page 4284to be held at 9:30 a.m. on May 14, 2002, at the U.S. International Trade Commission Building. Oral testimony and written materials to be submitted at the public hearing are governed by §§201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 days prior to the date of the hearing.
Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of §207.23 of the Commission's rules; the deadline for filing is May 13, 2002. Parties may also file written testimony in connection with their presentation at the hearing, as provided in §207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of §207.25 of the Commission's rules. The deadline for filing posthearing briefs is May 24, 2002; witness testimony must be filed no later than three days before the hearing. In addition, any person who has not entered an appearance as a party to the investigation may submit a written statement of information pertinent to the subject of the investigation on or before May 24, 2002. On June 13, 2002, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before June 17, 2002, but such final comments must not contain new factual information and must otherwise comply with §207.30 of the Commission's rules. All written submissions must conform with the provisions of §201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of §§201.6, 207.3, and 207.7 of the Commission's rules. The Commission's rules do not authorize filing of submissions with the Secretary by facsimile or electronic means.
In accordance with §§201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigation must be served on all other parties to the investigation (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.Start Signature
Issued: January 24, 2002.
By order of the Commission.
Donna R. Koehnke,
1. For purposes of this investigation, the Department of Commerce has defined the subject merchandise as “certain welded carbon quality steel pipes and tubes, of circular cross section, with an outside diameter of 0.372 inch (9.45 mm) or more, but not more than 16 inches (406.4 mm), regardless of wall thickness, surface finish (black, galvanized, or painted), end finish (plain end, beveled end, grooved, threaded, or threaded and coupled), or industry specification (ASTM, proprietary, or other), generally known as standard pipe and structural pipe.” The scope also includes dual-certified A-53/API or single certified pipe that enters the United States if it is used in, or intended for use in, standard pipe or structural pipe applications. The scope does not include boiler tubes, pressure tubing, mechanical tubing, finished conduit, oil country tubular goods, and line pipe. The subject product, along with other types of pipe, is provided for in subheadings 7306.30.10 and 7306.30.50 of the Harmonized Tariff Schedule of the United States. For a more detailed description of the merchandise subject to this investigation, see Commerce's notice of preliminary determination (66 FR 67500, December 31, 2001).Back to Citation
[FR Doc. 02-2141 Filed 1-28-02; 8:45 am]
BILLING CODE 7020-02-P