Skip to Content


Export Trade Certificate of Review

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Notice of issuance of an amended Export Trade Certificate of Review, Application No. 88-5A012.


The Department of Commerce has issued an amended Export Trade Certificate of Review to the National Tooling Machining Association (“NTMA”) on March 7, 2002. The original Certificate was issued on October 18, 1988 (53 FR 43140, October 25, 1988) and previously amended on December 4, 1989 (54 FR 51914, December 19, 1989); September 2, 1993 (58 FR 47868, September 13, 1993); May 3, 2000 (65 FR 30073, May 10, 2000); and April 5, 2001 (66 FR 21335, April 30, 2001).

Start Further Info


Vanessa M. Bachman, Acting Director, Office of Export Trading Company Affairs, International Trade Administration, (202) 482-5131 (this is not a toll-free number), or by e-mail at

End Further Info End Preamble Start Supplemental Information


Title III of the Export Trading Company Act of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to issue Export Trade Certificates of Review. The regulations implementing Title III are found at 15 CFR part 325 (2000).

The Office of Export Trading Company Affairs (“OETCA”) is issuing this notice pursuant to 15 CFR 325.6(b), which requires the Department of Commerce to publish a summary of the Certification in the Federal Register. Under section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by the Secretary's determination may, within 30 days of the date of this notice, bring an action in any appropriate district court of the United States to set aside the determination on the ground that the determination is erroneous.

Description of Amended Certificate

NTMA's Export Trade Certificate of Review has been amended so that the attached list will constitute the “Members” of the Certificate within the meaning of § 325.2(1) of the Regulations (15 CFR 325.2(1)).

The effective date of the amended certificate is December 12, 2001. A copy of the amended certificate will be kept in the International Trade Administration's Freedom of Information Records Inspection Facility, Room 4102, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230.

Start Signature

Dated: March 12, 2002.

Vanessa M. Bachman,

Acting Director, Office of Export Trading Company Affairs.

End Signature

21st Century Tool Die, Inc., Waynesboro, TN

3 M MTC, Petaluma, CA

4 Axis Machining, Inc., Denver, CO

A-1 Precision Metal Products, Phoenix, AZ

A A Industries, Inc., Peabody, MA

A A Machine Company, Inc., Southampton, PA

A A Machine Shop, Inc., La Marque, TX

A B Machine, Van Nuys, CA

A B Machine Shop, Rockford, IL

A B Tool Manufacturing Corp., Toledo, OH

A D Precision, Fremont, CA

A E Custom Manufacturing, Technologies, Inc., Kansas City, KS

A E Machine Shop, Inc., Lone Star, TX

A G Machine, Inc., Auburn, WA

A S Tool Die Company, Inc., Kernersville, NC

A A Precisioneering, Inc., Meadville, PA

A B A Division, A B A-P G T, Inc., Manchester, CT

A B C O Tool Engineering, Phoenix, AZ

A B Heller, Inc., Milford, MI

A B N Industrial Co., Inc., Buena Park, CA

A B R Enterprises Inc., South Pasadena, CA

A C Machine, Inc., Akron, OH

A E Cole Die Engraving, Columbus, OH

A E Machine Works, Inc., Houston, TX

A F C Tool Company, Inc., Subsidiary of F C Industries, Dayton, OH

A I M Tool Die, Grand Haven, MI

A M C Precision, Inc., N. Tonawanda, NY

A M Design, E. Canton, OH

A M Machine Company, Inc., Baltimore, MD

A Mfg., Redlands, CA

A S C Corporation, Owings Mills, MD

A-Line Tool Die, Inc., Louisville, KY

A-G Tool Die, Div. of Seilkop Industries, Inc., Miamitown, OH

A-RanD, Inc., Phoenix, AZ

A B Aerospace, Inc., Azusa, CA

A. C. Grinding Supply Co. Inc., Levittown, PA

A. C. Cut-Off, Inc., Azusa, CA

A+ Engineering, Ipswich, MA

Abbott Tool, Inc., Toledo, OH

Abbott Machine Tool, Inc., Toledo, OH

Ability Tool Company, Rockford, IL

Able Wire EDM, Inc., Brea, CA

Abrams Airborne Manufacturing, Inc., Tucson, AZ

Absolute Turning Machine, Tucson, AZ

Absolute Manufacturing, N. Chelmsford, MA

Absolute Grinding Co., Inc., Mentor, OH

Acadiana Hydraulic Works, Inc., New Iberia, LA

Accu-Roll, Inc., Rochester, NY

Accu Die Mold Inc., Stevensville, MI

AccuCraft, New Haven, MO

Accudynamics, Inc., Middleboro, MA

Accudyne Aerospace Defense, Palm Bay, FL

Accura Industries, Inc., Rochester, NY

Accurate Grinding Mfg. Corp., Accurate Fishing Products, Los Angeles, CA

Accurate Grinding Corp., Warwick, RI

Accurate Machine Co. Inc., Indianapolis, IN

Accurate Machining, Mukilteo, WA

Accurate Manufacturing Company, Glendale, CA

Accurate Products Co., Tucson, AZ

Accurate Marking Products, Inc., Pittsburgh, PA

Accurite Machine Mfg. Inc., Louisville, KY

Accutronics, Inc., Littleton, CO

Ace Specialty Company, Inc., Tonawanda, NY

Ace Manufacturing Company, Cincinnati, OH

Ackley Machine Corporation, Moorestown, NJ

Acklin Stamping, Toledo, OH

Acme/Walton Machine Tool, Inc., Louisville, KY

Acme Metal Works, Gilbert, AZ

ACMT, Inc. dba A C Tool Machine, Co., Louisville, KY

Acraloc Corporation, Oak Ridge, TN

Acro Industries, Inc., Rochester, NY

Acro Tool Die Company, Inc., Akron, OH

Actco Tool Mfg. Co., Meadville, PA

Action Die Tool Inc., Wyoming, MI

Action Mold Tool Co., Anaheim, CA

Action Precision Grinding Inc., North Tonawanda, NY

Action SuperAbrasive Products, Brimfield, OH

Action Tool and Manufacturing, Inc., Rockford, IL

Action Machine L.L.C., Phoenix, AZ

Action E.D.M. Tool Inc., Concord, NC

Acucut, Inc., Southington, CTStart Printed Page 11982

Acutec Precision Machining Inc., Saegertown, PA

Ada Machine Company, Inc., Santa Clara, CA

Adams Engineering, Division of Manufacturing Technology, Inc., South Bend, IN

Adaptive Technologies Inc., Springboro, OH

Addison Precision Mfg. Corp., Rochester, NY

Adena Tool Corporation, Dayton, OH

Admill Machine Company, Newington, CT

Adron Tool Corporation, Menomonee Falls, WI

Advance Manufacturing Corp., Cleveland, OH

Advance Manufacturing Technology, Salt Lake City, UT

Advanced Ceramic Technology, Orange, CA

Advanced Composite Products Technology, Inc. (ACPT Inc.), Huntington Beach, CA

Advanced Cutting Tools, Inc., Clio, MI

Advanced Machine Programming, Morgan Hill, CA

Advanced Machining Corporation, Salisbury, NC

Advanced Measurement Labs, Inc., Sun Valley, CA

Advanced Mold Tooling Inc., Rochester, NY

Advanced Tooling Specialists Inc., Menasha, WI

Advanced Tooling Systems, Inc., Comstock Park, MI

Advanced Product Design Specialties, Riverside, CA

Advanced Machine Inc., Rochester, NY

Advanced Precision Engineering, Ipswich, MA

Advantage Mold Design, Meadville, PA

Aero Comm Machining, Wichita, KS

Aero Design Manufacturing Co., Phoenix, AZ

Aero Engineering Mfg. Company, Valencia, CA

Aero Gear, Inc., Windsor, CT

Aero Machining Company, Garden Grove, CA

Aero Mechanical Engineering, Inc., Huntington Beach, CA

Aero-Tech Engineering, Inc., Wichita, KS

Aerofab, Inc., Tucson, AZ

Aerostar Aerospace Inc., Phoenix, AZ

Aetna Machine Company, Cochranton, PA

Aggressive Tool Die, Inc., Buckner, KY

Aggressive Tool Die, Inc., Coopersville, MI

Agrimson Tool Company, Brooklyn Park, MN

Ahaus Tool Engineering, Inc., Richmond, IN

Aimco Precision, Inc., Phoenix, AZ

Airmetal Corporation, Jackson, MI

Ajax Tool, Inc., Fort Wayne, IN

Akro Tool Co., Inc., Cincinnati, OH

Akron Steel Fabricators Company, Akron, OH

Akron Tool Die Company, Inc., Akron, OH

Alart Tool Die, Inc., Houston, TX

Albert Seisler Machine Corp., Mohnton, PA

Albertson Hein, Inc., Wichita, KS

Albion Machine Tool Company, Albion, MI

Alco Manufacturing, Inc., Santa Ana, CA

Alfred Manufacturing Company, Denver, CO

Alger Machine Company, Inc., Rochester, NY

Alignment Engineering Co., Inc., Knoxville, TN

ALKAB Contract Manufacturing, Inc., New Kensington, PA

All Tool Company, Union, NJ

All Tools Company, Oklahoma City, OK

All Tools Texas, Inc., Houston, TX

All Weld Machine, Milpitas, CA

All-Tech Machine Eng., Inc., San Jose, CA

All-Tech Machining, Inc., Wilmer, AL

All Five Tool Company, Inc., Bristol, CT

Allen Precision Industries, Inc., Asheboro, NC

Allen Precision Machining Co., Angleton, TX

Allen Randall Enterprises, Inc., Akron, OH

Allen Aircraft Products, Inc., Ravenna, OH

Alliance Machine Tool Co., Inc., Louisville, KY

Allied Screw Products, Inc., Mishawaka, IN

Allied Tool Die Company, LLC, Phoenix, AZ

Allied Tool Die, Inc., Cleveland, OH

Allied Tool Machine Company, Kernersville, NC

Allied Tool Machine, Inc., Saginaw, MI

Allied Tools Of Texas, Houston, TX

Allied Mechanical Products, Ontario, CA

Alloy Metal Products, Hayward, CA

Allstate Tool Die, Inc., Rochester, NY

Almar Mfg. Engineering, Inc., Garden Valley, CA

Alpha Mold, LLC, Huber Heights, OH

Alpha Precision Machining Inc., Kent, WA

Alpha Tool Machine Company, Bellmawr, NJ

Alpha Tooling, Inc., Santa Fe Springs, CA

Alpha Mold West Inc., Broomfield, CO

Alpine Precision, Inc., North Billerica, MA

Alro Specialty Metals, St. Louis, MO

Alt's Tool Machine, Inc., Santee, CA

Alton Products, Inc., Maumee, OH

Alves Precision Engineered, Products Inc., Watertown, CT

AMA Plastics, Corona, CA

Amatrol, Inc., Jeffersonville, IN

Ambel Precision Mfg. Corp., Bethel, CT

American Mfg. Machining, Inc., Racine, WI

American Precision Machining, Inc., Phoenix, AZ

American Precision Technologies, Inc., San Fernando, CA

American Tool Die, Inc., Toledo, OH

American Wire EDM, Inc., Orange, CA

American Metal Masters, Inc., Plantsville, CT

American Machine Gundrilling, Co., Inc., Maple Grove, MN

Amerimold, Inc., Mogadore, OH

Ameritech Die Mold, Inc., Mooresville, NC

Amity Mold Company, Tipp City, OH

AMS Production Machining Inc., Plainfield, IN

Anchor Tool Die Company, Cleveland, OH

Anchor Lamina Inc., Madison Heights, MI

Anders Machine and Engraving, Div. of Ad-Tech Machine Tool, Rochester, NY

Anderson Tool Engineering Co., Inc., Anderson, IN

Andrew Tool Company, Inc., Plymouth, MN

Anglo-American Mold, Inc., Louisville, KY

Anmar Precision Components Inc., North Hollywood, CA

Anmark Machine, Tempe, AZ

Anoplate Corporation, Syracuse, NY

Apex Tool Manufacturing, Inc., Evansville, IN

Apex Precision Technologies, Inc., Camby, IN

Apex Machine Company, Ft. Lauderdale, FL

Apex Machine Tool Company, Farmington, CT

Apollo Products Inc., Willoughby, OH

Apollo E.D.M. Company, Fraser, MI

Apollo Precision, Inc., Plymouth, MN

Applegate EDM, Inc., Dallas, TX

Applied Technology Manufacturing, Corp., Owego, NY

Applied Technology Manufacturing, Inc., Rochester, NY

Applied Engineering, Inc., Yankton, SD

AR Industries Inc., Cincinnati, OH

Aram Precision Tool Die, Inc., Chatsworth, CA

Arc Drilling Inc., Garfield Heights, OH

Arca Systems, Tacoma, WA

Arco Metals Corporation, Baltimore, MD

Arco Industries, Inc., Dayton, OH

Ardekin Machine Company, Rockford, IL

Area Tool Manufacturing, Inc., Meadville, PA

Aremco, Inc., Grand Rapids, MN

ARG Manufacturing Corp., Arlington, TX

Argo Tool Corporation, Twinsburg, OH

Aries Tool, Inc., New Berlin, WI

Arkansas Tool Die, Inc., North Little Roc, AR

Arlington Machine Tool Company, Fairfield, NJ

Arma Tool Die Company, Inc., Ridgefield, CT

Armin Tool Manufacturing Co., Inc., South Elgin, IL

Armstrong-Blum Mfg. Co., Mt. Prospect, IL

Armstrong Machine Works, Inc., Rogersville, TN

Armstrong Mold, Machining Div., East Syracuse, NY

Armstrong Technology, Inc., Sunnyvale, CA

Arnett Tool, Inc., New Paris, OH

Arnette Pattern Company/Midwest, Machining Fabricating, Granite City, IL

Arrington Supply House, Inc., Tuscaloosa, AL

Arro Tool Die, Inc., Lakewood, NY

Arrow Grinding, Inc., Tonawanda, NY

Arrow Diversified Tooling, Inc., Ellington, CT

Arrow Sheet Metal Products Co., Denver, CO

Arthur J. Evers Corporation, Riverton, NJ

Artisan Machining, Inc., Bohemia, NY

Artisan Associates, Detroit, MI

Ascension Industries, North Tonawanda, NY

Ash Machine Corporation, Pataskala, OH

Aspen Precision Technologies, Inc., Petaluma, CA

Associated Toolmakers, Inc., Keokuk, IA

Associated Technologies, Brea, CA

Associated Electro-Mechanics, Inc., Springfield, MA

Astley Precision Machine Co., Irwin, PA

Astro Machine Works Inc., Ephrata, PA

Astro Automation, Inc., Irwin, PA

Astrotronics Inc., Mesa, AZ

Atec Engineering, Phoenix, AZ

Athens Industries, Southington, CT

Atkins Tool Company, Riverton, NJ

Atlantic Tool Die Company, Strongsville, OH

Atlantic Precision Products Inc., Sanford, ME

Atlas Tool, Inc., Roseville, MI

Atlas Machine Supply, Inc., Louisville, KY

August Machine, Inc., Phoenix, AZ

Austin Machine Company Inc., O'Fallon, MO

Austro Mold Incorporated, Rochester, NY

Autocam Corporation, Kentwood, MI

Automated EDM Incorporated, Ramsey, MN

Automated Cells Equipment, Inc., Painted Post, NYStart Printed Page 11983

Automatic Stamp Products, Inc., Cleveland, OH

Automation Technology, Inc., St. Louis, MO

Automation Tool Die, Inc., Brunswick, OH

Automation Tool Company, Cookeville, TN

Avanti Engineering Manufacturing, Inc., Greensburg, PA

Axian Technology, Phoenix, AZ

Axis Mfg. Inc., Tempe, AZ

Ay-Mac Precision, Inc., Yorba Linda, CA

Ay Machine Company, Ephrata, PA

b b Tool Company, Inc., Rockford, IL

B A Design Inc., Vernon, CT

B B Machine Grinding Service, Denver, CO

B B Manufacturing Company, Largo, FL

B B Precision Mfg., Inc., Avon, NY

B E Tool Company, Inc., Southwick, MA

B G Quality Machine Tool, Company, Inc., Baltimore, MD

B H Fabricators, Inc., Wilmington, CA

B H Tool Co. Inc., San Marcos, CA

B H Tool Works, Inc., of Rockcastle Co., Richmond, KY

B K Engineering, Inc., Mountain View, CA

B L Tool and Machine Company, Plainville, CT

B M Machine Corporation of Racine, Racine, WI

B C D Metal Products Inc., Malden, MA

B J Williams Machining Co., Edinboro, PA

B-W Grinding Service, Inc., Houston, TX

B. Radtke Sons, Inc., Round Lake Park, IL

Bachman Machine Company, Inc., St. Louis, MO

Bachmann Precision Machine, Products Corp., South El Monte, CA

Badge Machine Products, Inc., Canandaigua, NY

Bahrs Die Stamping Company, Inc., Cincinnati, OH

Baker Hill Industries, Inc., Coral Springs, FL

Banner Machine Inc., Phoenix, AZ

Barberie Mold, Gardena, CA

Bardons Oliver, Inc., Solon, OH

Barile Precision Grinding Inc., Cleveland, OH

Barnes Aerospace-Apex Mfg., Phoenix, AZ

Basic VI, San Jose, CA

Bass Machining Inc., Baltimore, MD

Bateman Manufacturing Co., Inc., Hayward, CA

Baumann Engineering, Claremont, CA

Bawden Industries, Inc., Romulus, MI

Baxter Machine Products, Inc., Huntingdon, PA

Bayport Machine, Inc., La Porte, TX

Beach Mold Tool, Inc., New Albany, IN

Beacon Tool Company, Inc., Whittier, CA

Beaver Tool Machine Company, Inc., Feasterville, PA

Bechler Cams, Inc., Anaheim, CA

Becker, Inc., Kenosha, WI

Beckett Gas, Inc., North Ridgeville, OH

Becksted Machine, Inc., Tucson, AZ

Bedard Machine, Inc., Brea, CA

Bel-Kur, Inc., Temperance, MI

Belco Tool Mfg. Inc., Meadville, PA

Belgian Screw Machine Products, Inc., Concord, MI

Bell Engineering, Inc., Saginaw, MI

Bellco Precision Manufacturing, Inc., Melissa, TX

Beloit Precision Die Co. Inc., Beloit, WI

Benchmark Engineering, Inc., Chandler, AZ

Benda Tool Model Works, Hercules, CA

Bendon Gear Machine, Rockland, MA

Bennett Tool Die Company, Nashville, TN

Bennett Tool Machine, Fremont, CA

Benning Inc., Blaine, MN

Bent River Machine Inc., Clarkdale, AZ

Berman Tool Die, Waldorf, MD

Bermar Associates, Inc., Troy, MI

Bertram Tool Machine Co., Inc., Farrell, PA

Bertrand Products, Inc., South Bend, IN

Best Tool Manufacturing Co., Inc., Kansas City, MO

Best Way Stamping Inc., La Mirada, CA

Bestway Industries, Inc., Cleveland, OH

Beta Machine Co. Inc., Cleveland, OH

Beta Tool Mold/Dyna-Tech, Wadsworth, OH

Bilar Tool Die Corporation, Warren, MI

Billet Industries, Inc., York, PA

Bishop Steering Technology, Inc., Indianapolis, IN

Black Creek, Inc., Gadsden, AL

Blackburn Melton Mfg. Company, Houston, TX

Blackwood Grinding Inc., Hurst, TX

Blandford Machine Tool Co., Inc., Louisville, KY

Blue Chip Mold, Inc., Rochester, NY

Blue Chip Tool Company, Inc., New Castle, PA

Bluegrass Forging, Tool Die, Shelbyville, KY

bmc Industries, Bakersfield, CA

BMCO Industries Inc., Cranston, RI

Bob's Tool Cutter Grinding, Inc., Indianapolis, IN

Boice Industrial Corporation, Ruffsdale, PA

Bolt Industries, LLC., Phoenix, AZ

Boring, Inc., Rockford, IL

Bosma Machine Tool, Corporation, Tipp City, OH

Boss Tool and Manufacturing, Inc., Fremont, CA

Boston Centerless Inc., Woburn, MA

Bourdelais Grinding Co., Inc., Chatsworth, CA

Bowden Manufacturing Corp., Willoughby, OH

Boyce Machine, Inc., Cuyahoga Falls, OH

Boyle, Inc., Freeport, PA

BPS Industries Inc., Baltimore, MD

Bra-Vor Tool Die Company, Inc., Meadville, PA

Bradford Machine Company Inc., Brattleboro, VT

Bradhart Products, Inc., Brighton, MI

Bramko Tool Engineering, Inc., O'Fallon, MO

Bratt Machine Company Inc., No. Andover, MA

Brij Systems, Wichita, KS

Brimar Products, Inc., Fontana, CA

Brinkman Tool Die, Inc., Dayton, OH

Britt Tool, Inc., Brazil, IN

Brittain Machine, Inc., Wichita, KS

Broadway Companies, Inc., Englewood, OH

Brogdon Tool Die, Inc., Blue Springs, MO

Brookfield Machine, Inc., West Brookfield, MA

Brooklyn Scraping Re-Machining, Inc., W. Lafayette, IN

Brooklyn Machine Mfg. Co., Inc., Cuyahoga Heights, OH

Brown-Covey, Inc., Kansas City, MO

Brownes' Machining, LLC., Sharon, TN

Brownstown Quality Tool Design, Brownstown, IN

BSB Products Corporation, Buffalo, NY

BT Laser, Inc., Santa Clara, CA

Budney Overhaul Repair, LTD., Berlin, CT

Buerk Tool Machine Corporation, Buffalo, NY

Buiter Tool Die, Inc., Grand Rapids, MI

Bundy Manufacturing, Inc., El Segundo, CA

Burckhardt America, Inc., Greensboro, NC

Burco Precision Products, Inc., Denton, TX

Burger Engineering, Inc., Olathe, KS

Burgess Brothers, Inc., Canton, MA

Burton Industries, Inc., Mentor, OH

C C Machine Company, Akron, OH

C C Manufacturing Corporation, Englewood, CO

C G Machine Tool Co., Inc., Granby, MA

C J Industries, Inc., Meadville, PA

C M Machine Products, Inc., Willoughby, OH

C R Manufacturing, Inc., Shawnee, KS

C S Machine Manufacturing Corporation, Louisville, KY

C A R Engineering Mfg., Victor, NY

C B Enterprises, Division of Whiteledge, Inc., Manchester, CT

C B Kaupp Sons, Inc., Maplewood, NJ

C B S Manufacturing Company, Inc., Windsor, CT

C D M Tool Mfg. Co., Inc., Hartford, WI

C F A Company, Inc., Milford, CT

C J Winter Machine Technologies, Inc., Rochester, NY

C K Tool, Harborcreek, PA

C M Gordon Industries, Inc., Santa Fe Springs, CA

C M Industries, Inc., d/b/a Custom Marine, Inc., Old Saybrook, CT

C N C Machine Engineering Corporation, Colorado Springs, CO

C N C Precision Machining, Inc., Comstock Park, MI

C T D Machines, Inc., Los Angeles, CA

C V Tool Company, Inc., Southington, CT

C-P Mfg. Corp., Van Nuys, CA

C C Precision Machining Inc., Mesa, AZ

C-Axis Inc., Hamel, MN

C. G. Tech, Inc., Phoenix, AZ

C.N.C. Tool Mold, Naples, FL

Caco Pacific Corporation, Covina, CA

Cadco Program Machine, St. Charles, MO

Cal-Weld, Fremont, CA

Calder Machine Co. (C M C), Florence, SC

California Mold, Fullerton, CA

California Machine Specialties, Chino, CA

Calmax Technology, Inc., Santa Clara, CA

Cambridge Specialty Company, Inc., Kensington, CT

Cambridge Tool Die Corp., Cambridge, OH

Cameron Machine Shop, Inc., Richardson, TX

Campbell Grinding Machine, Inc., Lewisville, TX

Campro Manufacturing, Inc., Phoenix, AZ

CamTech Systems, Inc., Alhambra, CA

Canto Tool Corporation, Meadville, PA

Capitol Technologies, Inc., South Bend, IN

Capitol Tool Die, L. P., Madison, TN

Carbi-Tech, Inc., Vandergrift, PA

Carbide Probes, Inc., Dayton, OH

Carboloy, Inc., Warren, MI

Cardinal Machine Company, Inc., Strongsville, OH

Carius Tool Co., Inc., Cleveland, OH

Carlin Machine Company, Inc., Southborough, MA

Carlson Capital Manufacturing Co., Rockford, ILStart Printed Page 11984

Carlson Tool Manufacturing Corp., Cedarburg, WI

Casale Engineering, Santa Fe Springs, CA

Cascade Mold Die, Inc., Portland, OR

Cass Screw Machine Products Company, Brooklyn Center, MN

Catalina Tool Mold, Inc., Tucson, AZ

Cates Machine Shop, Inc., Tyler, TX

Cavalry Precision Machine, Inc., Largo, FL

CB Quality Machining Engineering Inc., Buffalo, MN

CDL Manufacturing, Inc., Rochester, NY

Cee-San Machine Fabrication Co., Inc., Houston, TX

Centaur Tool Die, Inc., Bowling Green, OH

Centennial Technologies, Inc., Saginaw, MI

Center Line Industries, Inc., West Springfield, MA

Center Line Machine Company, Lafayette, CO

Center Line Tool, Freeport, PA

Central Mass. Machine, Inc., Holyoke, MA

Central States Machine Service, Elkhart, IN

Central Tool Machine Co., Inc., Bridgeport, CT

Central Tools, Inc., Cranston, RI

Century Die Company, Fremont, OH

Century Mold Company, Inc., Rochester, NY

Century Tool Engr., Inc., Indianapolis, IN

Certified Grinding Machine, Inc., Rochester, NY

Certified Industries, II, LLC, Phoenix, AZ

CG Manufacturing Company, Willoughby, OH

Chadakoin Interactive, Rochester, NY

Challenger Worldwide, Inc., Phoenix, AZ

Chalmers Kubeck, Inc., Aston, PA

Chamtek Mfg., Inc., Rochester, NY

Chance Tool Die Co., Inc., Cincinnati, OH

Chandler Tool Design Inc., Rockford, IL

Chapman Engineering, Inc., Santa Ana, CA

Charmilles Technologies Corporation, Lincolnshire, IL

Chase Machine Mfg. Co., Rochester, NY

Chelar Tool Die, Inc., Belleville, IL

Cherokee Industries, Hampshire, IL

Cherry Valley Tool Machine Inc., Belvidere, IL

Chicago Mold Engineering Co., Inc., St. Charles, IL

Chicago Grinding Machine Co., Melrose Park, IL

Chickasha Manufacturing Company, Inc., Chickasha, OK

Chippewa Tool Manufacturing Co., Woodville, OH

CHIPSCO, Inc., Meadville, PA

Chopper Guys Biker Products, Inc.,Vallejo, CA

Christie Manufacturing, Inc., Gainesville, TX

Christopher Tool Manufacturing, Solon, OH

Cindex Industries Inc., Ludlow, MA

Circle-K-Industries, K-Form Inc., Sterling, VA

CitiCapital Dealer Finance, Kennesaw, GA

Clarion Tech. Caledonia Tool, Caledonia, MI

Clark-Reliance Corporation, Strongsville, OH

Clark Automation Manufacturing Company, Inc., Pleasanton, CA

Clarke Engineering, Inc., Clarke Gear Co., North Hollywood, CA

Class Machine Welding, Inc., Akron, OH

Classic Tool, Inc., Macedonia, OH

Classic Tool, Inc., Saegertown, PA

Clay Bailey Mfg. Co., Kansas City, MO

Cleveland Electric Laboratories Company, Inc., Twinsburg, OH

Clifton Automatic Screw, Machine Products, Inc., Lake City, PA

Cloud Company, San Luis Obispo, CA

CNC Precision Manufacturing, Inc., Farmers Branch, TX

Coast Cutters Company, Inc., South El Monte, CA

Coastal Machine Company, Branford, CT

Cobak Tool Manufacturing Co., St. Louis, MO

Coffey Associates, Washington, DC

Coil Pro Machinery, Southington, CT

Colbrit Manufacturing Co., Inc., Chatsworth, CA

Collins Machine Works, Inc., Wellford, SC

Collins Machine Tool Co., Inc., Madison, TN

Collins Instrument Company, Angleton, TX

Colonial Machine Company, Kent, OH

Colonial Machine Tool Co., Inc., Coventry, RI

Colorado Surface Grinding, Inc., Denver, CO

Colorado Laser Marking, Inc., Colorado Springs, CO

Columbia Products, Inc., Dallastown, PA

Columbia Machine Works, Inc., Columbia, TN

Comac Manufacturing Corporation, Oroville, CA

Comet Tool, Inc., Hopkins, MN

Comfab, Inc., Spartanburg, SC

Command Tooling Systems, Ramsey, MN

Commerce Grinding, Inc., Dallas, TX

Commercial Grinding Services, Inc., Cleveland, OH

Commonwealth Machine Co., Inc., Danville, VA

Competition Tooling, Inc., High Point, NC

Competitive Engineering Inc., Tucson, AZ

Complete Tool Die, Inc., St. James, MO

Complete Metal Fabrication, Jeffersonville, IN

Composidie, Inc., Apollo, PA

Compu Die, Inc., Wyoming, MI

Compumachine Incorporated, Wilmington, MA

Computech Manufacturing Co., Inc., North Kansas City, MO

Computerized Machining Service, Inc., Englewood, CO

Concept Tool Die Company, Euclid, OH

Conco Systems, Inc., Verona, PA

Condor Engineering, Inc., Colorado Springs, CO

Connecticut Jig Grinding, Inc., New Britain, CT

Connelly Machine Works, Santa Ana, CA

Connolly Tool Machine Co., Dallas, TX

Conroy Knowlton, Inc., Los Angeles, CA

Consolidated Mold Mfg. Inc., Kent, OH

Conti Tool Die Company, Akron, OH

Conti Machine Tool Company, Inc., Haverhill, MA

Continental Tool Manufacturing, Inc., Lenexa, KS

Continental Tool Machine, Strongsville, OH

Continental Precision, Inc., Phoenix, AZ

Converse Industries, Inc., Kenosha, WI

Cook Technologies, Inc., Green Lane, PA

Cook Machine and Engineering Corporation, Gardena, CA

Coorstek, Livermore, CA

Coosa Machine Company, LLC, Rainbow City, AL

Corbitt Mfg. Company, St. Charles, MO

Cornerstone Screw Machine, Products, Burbank, CA

Cornerstone Design, Franksville, WI

Corning Gilbert, Inc., Glendale, AZ

Corrigan Manufacturing Co., Inc., Rockford, IL

Corrugated Roller Machine, Inc., Santa Fe Springs, CA

Corry Custom Machine, Corry, PA

Cosar Mold, Inc., Brimfield, OH

Costa Machine, Inc., Akron, OH

Country Machine Tool, Inc., Tipp City, OH

Covert Manufacturing, Inc., Galion, OH

Cox Tool Company, Inc., Excelsior Spring, MO

Cox Mfg. Co., Inc., San Antonio, TX

CPC Tooling Technologies, Columbus, OH

Craftsman Tool Mold Company, Aurora, IL

Craig Machinery Design, Inc., Louisville, KY

Creative Precision, West, Phoenix, AZ

Creative Machining Mfg., Inc., St. Petersburg, FL

Creb Engineering, Inc., Pascoag, RI

Crenshaw Die Manufacturing Corp., Irvine, CA

Crest Manufacturing Company, Lincoln, RI

Criterion Tool Die, Inc., Brook Park, OH

Critical Operations, Inc., Santa Ana, CA

Crosrol, Inc., Greenville, SC

Cross Tool Manufacturing, Inc., Flagstaff, AZ

Crossland Machinery, Kansas City, MO

CrossRidge Precision, Oak Ridge, TN

Crown Mold Machine, Streetsboro, OH

Crown Machine, Inc., Rockford, IL

Crucible Materials Corporation, Camillus, NY

Crush Master Grinding Corp., Walnut, CA

Custom Mold Design, Inc., Plymouth, MN

Custom Tool Design, Inc., Erie, PA

Custom Tool Grinding, Inc., Washington, PA

Custom Tool Model Corp., Frankfort, NY

Custom Machine, Inc., Cleveland, OH

Custom Machine, Inc., Woburn, MA

Custom Gear Machine, Inc., Rockford, IL

Custom Engineering, Inc., Evansville, IN

Custom Metal Cutting, Inc., Rockwall, TX

Cut-Right Tools Corporation, Willoughby, OH

Cutting Edge Manufacturing, Scottsdale, AZ

Czech Tool, Saegertown, PA

D B Industries, Inc., Dayton, OH

D H Manufacturing Company, Fremont, CA

D J Precision Machining, Inc., Hayward, CA

D K Industries, Inc., Chatsworth, CA

D N Precision, Inc., San Jose, CA

D R Precision Machining, San Jose, CA

D S Manufacturing Corporation, Southwick, MA

D M E Company, Madison Heights, MI

D M Machine Tool, Kennerdell, PA

D M Machine Company, Inc., Willoughby, OH

D P I, Inc., Huntingdon Vly, PA

D P Tool Machine, Inc., Avon, NY

D S A Precision Machining, Inc., Livonia, NY

D S Greene Company, Inc., Wakefield, MA

D-Velco Manufacturing, Phoenix, AZ

D-K Manufacturing Corporation, Fulton, NY

D. F. O'Brien Precision Machining Tooling, Santa Fe Springs, CA

Daca Machine Tool, Inc., Dutzow, MO

DaCo Precision Manufacturers, Sandy, UT

Dadeks Machine Works Corporation, Houston, TXStart Printed Page 11985

Daily Industrial Tools, Costa Mesa, CA

Dan McEachern Company, Alameda, CA

Dan's Precision Grinding, and Thread Rolling, Sun Valley, CA

Danco Precision, Inc., Phoenixville, PA

Dane Systems, Inc., Stevensville, MI

Danly IEM, Div. of Connell Ltd. Partnership, Cleveland, OH

Data Mold Tool, Inc., Walbridge, OH

Data Machine, Inc., Adamsburg, PA

Datum Industries, Kentwood, MI

David Engineering Mfg., Corona, CA

Davis Machine Manufacturing Company, Arlington, TX

Davken, Inc., Brea, CA

Dayton Reliable Tool Mfg. Co., Dayton, OH

Dayton Progress Corporation, West Carrollton, OH

De Long Manufacturing Co., Inc., Santa Clara, CA

De-Lux Mold Machine, Inc., Brady Lake, OH

Dearborn Precision Tubular, Products, Inc., Fryeburg, ME

Deck Brothers, Inc., Buffalo, NY

Deep Holdings, Inc., dba Deephole Machine, Houston, TX

Defiance Innovations Ltd., Company, Earth City, MO

Dekalb Tool Die, Inc., Tucker, GA

DeKing Screw Products Inc., Burbank, CA

Delco Machine Gear, No. Long Beach, CA

Delco Corporation, Akron, OH

Dell Tool, Penfield, NY

Delltronics, Inc., Englewood, CO

Delta Machining, Inc., Niles, MI

Delta Tech, Inc., Mentor, OH

Delta Machine Tool Company, Cleveland, OH

Deltron Engineering, Burbank, CA

Demaich Industries, Inc., Johnston, RI

Dependable Tool Manufacturing Co., Cleveland, OH

Dependable Machine Company, Inc., Indianapolis, IN

Desert Precision Mfg., Inc.,Tucson, AZ

Designs For Tomorrow, Inc., St. Louis, MO

Detroit Tool Engineering Co., Lebanon, MO

Deutsch ECD, Hemet, CA

Devtek Engineering Manufacturing, Colorado Springs, CO

Di-Matrix, Phoenix, AZ

Dial Machine Company, Andalusia, PA

Diamond Lake Tool, Inc., Anoka, MN

Diamond Machine Works, Inc., Seattle, WA

Diamond Tool Die Co., Inc., Euclid, OH

Diamond Tool Engineering, Inc., Bertha, MN

Die Cast Die and Mold, Inc., Perrysburg, OH

Die Dimensions, Kentwood, MI

Die Products Company, Minneapolis, MN

Die Quip Corp., Bethel Park, PA

Die Tech Industries, Ltd., Providence, RI

Die-Matic Corporation, Brooklyn Heights, OH

Die-Matic Tool and Die, Inc., Grand Rapids, MI

Die-Mension Corporation, Brunswick, OH

Die-Namic Inc., Taylor, MI

Die Solutions, Inc., Washington, MO

Die-Namic Tool Mfg., Inc., Rockford, IL

Diemaster Tool Mold, Inc., Macedonia, OH

Dietooling, Div. of Diemolding, Wampsville, NY

Digital Tool Die, Inc., Grandville, MI

Dimac Manufacturing Co., Inc., Alexander, AR

Distefano Tool Mfg. Company, Omaha, NE

Distinctive Machine Corporation, Grand Rapids, MI

Diversified Engraving Stamp, Machine Company, Akron, OH

Diversified Manufacturing, Incorporated, Lockport, NY

Diversified Tool Die,Vista, CA

Diversified Tool, Inc., Mukwonago, WI

Diversified Tooling Innovations, Inc., Racine, WI

Diversified Machine Products, LLC., Roebuck, SC

Dixie Tool Die Co., Inc., Gadsden, AL

Dixon Automatic Tool, Inc., Rockford, IL

DJM Mfg., Sunnyvale, CA

Double D Machine Tool Company, Fremont, OH

Douglas Machine Engineering Co., Davenport, IA

Doyle Manufacturing, Inc., Holland, OH

Drabik Tool and Die Inc., Brook Park, OH

Drewco Corporation, Franksville, WI

Drill Masters Inc., Hamden, CT

DT Scheu Kniss, Louisville, KY

Du-Well Grinding Company, Inc., Milwaukee, WI

Dugan Tool Die, Inc., Cottage Hills, IL

Dugan Tool Die Company, Toledo, OH

Dukowitz Machine Inc., Nikiski, AK

Dun-Rite Industries, Inc., Monroe, MI

Dunn Bybee Tool Company, Inc., Sparta, TN

Duplicate Parts Company, Inc., San Marcos, CA

Dura-Metal Products Corporation, Irwin, PA

Durivage Pattern Mfg. Co. Inc., Williston, OH

DuWest Tool Die, Inc., Cleveland, OH

Dwyer Instruments Inc., W E Anderson Division, Grandview, MO

DynaGrind Precision, Inc., New Kensington, PA

Dynamic Tool Design, Inc., Menomonee Falls, WI

Dynamic Machine Fabricating, Phoenix, AZ

Dynamic Fabrication, Inc., Santa Ana, CA

Dynamic Engineering, Inc., Minneapolis, MN

Dysinger Incorporated, Dayton, OH

Dytran Instruments, Inc., Chatsworth, CA

E S Precision Machine, LLC, Modesto, CA

E B Sons Machine Inc., Aliquippa, PA

E C M Of Florida, Jupiter, FL

E J Codd Co. of Baltimore City , Codd Fabricators Boiler Co., Inc., Baltimore, MD

E K L Machine Company, Inc., Andalusia, PA

E R C Concepts Company, Inc., Sunnyvale, CA

E W Johnson Company, Inc., Lewisville, TX

E-M-Solutions, Inc., Fremont, CA

E-Fab, Inc., Santa Clara, CA

E. D. M. Exotics, Inc., Hayward, CA

E. T. Precision Optics Inc., Rochester, NY

Eagle Mold Company, Inc., Carlisle, OH

Eagle Technologies Group, St. Joseph, MI

Eagle Tool Machine Company, Inc., Springfield, OH

Eagle Precision Tooling Inc., Erie, PA

Eason Waller, Manufacturing Grinding, Phoenix, AZ

East Coast Tool Mfg., Inc., Orchard Park, NY

East Side Machine, Inc., Webster, NY

East Texas Machine Works, Inc., Longview, TX

Eaton Manufacturing, Inc., Fremont, CA

Ebway Corporation, Fort Lauderdale, FL

Eckert Enterprises Ltd., Tempe, AZ

Eckert Machining, Inc., San Jose, CA

Eclipse Mold, Inc., Clinton Township, MI

Eclipse Tool Die, Inc., Wayland, MI

Edco, Inc., Toledo, OH

Edge-Tech, Inc., Redmond, WA

EDM Supplies, Inc., Downey, CA

Edwardsville Machine Welding Company, Inc., Edwardsville, IL

Efficient Die Mold Inc., Cleveland, OH

Egli Machine Company, Inc., Sidney, NY

Ehlert Tool Co., Inc., New Berlin, WI

Ehrhardt Tool Machine Company, Granite City, IL

Eicom Corporation, Moraine, OH

EISC/CME, Toledo, OH

Ejay's Machine Co., Inc., Fullerton, CA

Elcam Tool Die, Inc., Wilcox, PA

Electra Form Industries Inc., Vandalia, OH

Electric Enterprise Inc., Stratford, CT

Electro-Mechanical Products, Inc., Denver, CO

Electro-Tech Machining, Long Beach, CA

Electro-Freeto Manufacturing Co., Inc., Wayland, MA

Electro Form Corporation, Binghamton, NY

Electroform Co. Inc., Machesney Park, IL

Elite Tool Machinery Systems, Inc., O'Fallon, MO

Elizabeth Carbide Die Co., Inc., McKeesport, PA

Elizabeth Carbide of North,Carolina, Inc., Lexington, NC

Elkhart Machine Group, Elkhart, IN

Elliot Tool Manufacturing Co., St. Louis, MO

Elliott's Precision, Inc., Peoria, AZ

Ellis Tool Machine, Inc., Tom Bean, TX

Ellis Machine and Fabrication Inc., Buffalo, NY

Ellison Machine Company, Laurens, SC

Elrae Industries, Alden, NY

Emig Machine and Tool, Warwick, PA

Emmert Welding Manufacturing, Inc., Independence, MO

Empire Manufacturing Corporation, Bridgeport, CT

Empire Die Casting Co., Inc., Macedonia, OH

Engineered Pump Services, Inc., Pasadena, TX

Engineered Machine Tool, Inc., Wichita, KS

Entek Corporation, Norman, OK

Entela, Inc., Grand Rapids, MI

Enterprise Tool Die, Brooklyn Heights, OH

Ephrata Precision Parts, Inc., Denver, PA

Epicor Software Corporation, Minneapolis, MN

Erca Tool Die Stamping Company, Richmond Hill, NY

Erickson Tool Machine Company, Rockford, IL

Erie Specialty Products, Inc., Erie, PA

Erie Shore Machine Co., Inc., Cleveland, OH

Ermco, Inc., Cleveland, OH

EROWA Technology Inc., Arlington Hts., IL

Estee Mold Die, Inc., Dayton, OH

Esterle Mold Machine Co., Stow, OH

Estul Tool Manufacturing Co., Inc., Matthews, NC

Evans Tool Die, Inc., Conyers, GA

Ever-Ready Tool, Inc., Largo, FL

Ever Fab, Inc., East Aurora, NY

Everett Pattern and Mfg., Inc., Middleton, MAStart Printed Page 11986

Ewart-Ohlson Machine Company, Cuyahoga Falls, OH

EWT, Inc., Rockford, IL

Ex-Cel Machine Tool, Inc., Louisville, KY

Exact Tool Die, Inc., Brook Park, OH

Exact Cutting Service, Inc., Brecksville, OH

Exacta Tech Inc., Livermore, CA

Exacta Machine, Inc., Wichita, KS

Exacto, Inc. of South Bend, South Bend, IN

Excaliber Precision Machining, Peoria, AZ

Excalibur Precision Machine Co., Inc., Hampstead, NH

Excel Stamping Manufacturing, Inc., Houston, TX

Excel Manufacturing, Inc., Valencia, CA

Excel Manufacturing Inc., Seymour, IN

Excel Machine Company, Philadelphia, PA

Excel Precision, Inc., Tempe, AZ

Executive Mold Corporation, Huber Heights, OH

Extreme Machine LLC, Phoenix, AZ

Ezell Precision Tool Company, Clearwater, FL

F F Machine Specialties, Mishawaka, IN

F G Tool Die Company, Dayton, OH

F L Tools Corporation, Corona, CA

F S Tool, Inc., Erie, PA

F C Machine Tool Design, Inc., Cuyahoga Falls, OH

F D T Precision Machine Co., Inc., Taunton, MA

F G A Inc., Baton Rouge, LA

F H Peterson Machine Corporation, Stoughton, MA

F K Instrument Co., Inc., Clearwater, FL

F M Machine Company, Akron, OH

F N Smith Corporation, Oregon, IL

F P Pla Tool Manufacturing Co., Buffalo, NY

F S G Inc., Mishawaka, IN

F T T Manufacturing Inc., Geneseo, NY

F Tinker Sons Company, Pittsburgh, PA

F W Gartner Thermal Spraying Co., Houston, TX

F-Squared, Inc., Tarentum, PA

F. S. Machining, Inc., Englewood, CO

Fab Lab, Inc., Maryland Heights, MO

Fabricast, Inc., So. El Monte, CA

Fairbanks Machine Tool, Raytown, MO

Fairview Machine Company, Inc., Topsfield, MA

Fairway Molds, Inc., Walnut, CA

Faith Tool Manufacturing, Inc., Willoughby, OH

Falcon Precision Machining Co., Inc., West Springfield, MA

Falls City Machine Technology, Louisville, KY

Falls Mold Die, Inc., Stow, OH

Fame Tool Manufacturing Co., Cincinnati, OH

FamPEC Technology LLC, Murfreesboro, TN

Fargo Machine Company, Inc., Ashtabula, OH

Farrar Corporation, Norwich, KS

Farzati Manufacturing Corp., Greensburg, PA

Fast Physics Inc., Phoenix, AZ

Faustson Tool Corp., Arvada, CO

Fay Quartermaine Machining Corp., El Monte, CA

Fay Tool Die, Inc., Orlando, FL

FCMP, Inc., Buffalo, NY

Feedall, Inc., Willoughby, OH

Feilhauer's Machine Shop Inc., Cincinnati, OH

Feller Tool Co., Inc., Elyria, OH

Fenton Manufacturing, Inc., Ashtabula, OH

Fenwick Machine Tool, Piedmont, SC

Feral Productions LLC., Newark, CA

Ferriot Inc., Akron, OH

First International Bank, Hartford, CT

Fischer Precision Spindles, Inc., Berlin, CT

Fischer Tool Die Corporation, Temperance, MI

Fitzwater Engineering Corp., Scituate, RI

Five Star Tool Company, Inc., Rochester, NY

Fleck Machine Company, Inc., Hanover, MD

Foresight Technologies, Tempe, AZ

Forster Tool Mfg. Inc., Bensenville, IL

Fortner Gifford, Inc., Prescott, AZ

Fostermation Inc., Meadville, PA

Four Pro Machine, Wichita, KS

Fox Valley Tool Die, Inc., Kaukauna, WI

Franchino Mold Engineering, Lansing, MI

Frasal Tool Co., Inc., Newington, CT

Frazier Aviation, Inc., San Fernando, CA

FRB Machine Inc., Emlenton, PA

Fre-Mar Industries, Inc., Brunswick, OH

Fredon Corporation, Mentor, OH

Free-MaDie Company, Kittanning, PA

Freeport Welding Fabricating, Inc., Freeport, TX

Fries Machine Tool, Inc., Dayton, OH

Frost Company, Charlestown, RI

Fulton Industries, Inc., Rochester, IN

Furno Co. Inc., Pomona, CA

Future Tool Die Company, Inc., Cleveland, OH

Future Tool Die, Inc., Grandville, MI

Future Fabricators, Phoenix, AZ

Fyco Tool Die, Inc., Houston, TX

G G Tool Company, Inc., Sidney, OH

G K Machine Company, Denver, CO

G L Tool Corp., Agawam, MA

G B F Enterprises, Inc., Santa Ana, CA

G B Tool Company, Warwick, RI

G H Tool Mold, Inc., Washington, MO

G M T Corporation, Waverly, IA

G R McCormick, Inc., Burbank, CA

G S G Tool and Manufacturing, Meadville, PA

G S Precision, Inc., Brattleboro, VT

Gadsden Tool, Inc., Gadsden, AL

Gainesville Machine Tools, Inc., Gainesville, TX

Galaxy Industries, Canton, MI

Gales Manufacturing Corporation, Racine, WI

Gambar Products Company, Inc., Warwick, RI

Garcia Associates, Arlington, VA

Gasaway Manufacturing LLC, Beasley, TX

Gatco, Inc., Plymouth, MI

Gauer Mold Machine Company, Tallmadge, OH

Gaum, Inc., Robbinsville, NJ

Gear Manufacturing, Inc., Anaheim, CA

Gebhardt Machine Works, Inc., Portland, OR

Geiger Manufacturing, Inc., Stockton, CA

Gem City Engineering Company, Dayton, OH

Gene's Gundrilling Inc., Alahambra, CA

General Aluminium Forgings, Colorado Springs, CO

General Die Engraving, Inc., Twinsburg, OH

General Engineering Company, Toledo, OH

General Grinding, Inc., Oakland, CA

General Machine Shop, Inc., Cheverly, MD

General Machine-Diecron, Inc., Griffin, GA

General Tool Die Company, Inc., Racine, WI

Genesee Manufacturing Company, Inc., Rochester, NY

Genesee Metal Stampings, Inc., West Henrietta, NY

Genesis Plastics Engineering, LLC, Scottsburg, IN

Genesis Manufacturing, Glendale, AZ

Gentec Manufacturing Inc., San Jose, CA

Geometric Tool Machine Co., Inc., Piedmont, SC

George Welsch Son Company, Cleveland, OH

German Machine, Inc., Rochester, NY

Germantown Tool Machine, Works, Inc., Huntingdon Valle, PA

Gibbs Die Casting Corporation, Henderson, KY

Gibbs Machine Company, Inc., Greensboro, NC

Gilbert Machine Tool Company, Greene, NY

Gill Tool Die, Inc., Grand Rapids, MI

Gillette Machine Tool Co Inc., Rochester, NY

Gillilan Machine Co., Inc., Mt. Juliet, TN

Girard Tool Die/Jackburn Mfg., Inc., Girard, PA

Gischel Machine Company Inc., Baltimore, MD

Givmar Precision Machining, Mountain View, CA

Glaze Tool Engineering, Inc., New Haven, IN

Glendale Machine Company, Inc., Solon, OH

Glendo Corporation, Emporia, KS

Glidden Machine Tool, Inc., North Tonawanda, NY

Global Mfg. Assembly, Inc., Boyer Machine Tech LLC, Phoenix, AZ

Global Precision, Inc., Davie, FL

Global Shop Solutions, The Woodlands, TX

GMB Machining Company, Livermore, CA

Godwin—SBO, L.P., Houston, TX

Golis Machine, Inc., Montrose, PA

Goodwin-Bradley Pattern Co., Inc., Providence, RI

Graham Tech Inc., Cochranton, PA

Granby Mold, Inc., Walled Lake, MI

Grand Valley Manufacturing Company, Titusville, PA

Graybill's Tool Die, Inc., Manheim, PA

Great Lakes E.D.M. Inc., Clinton Twp., MI

Great Lakes Metal Treating, Inc., Tonawanda, NY

Great Western Grinding Eng., Inc., Huntington Beach, CA

Great Lakes Tooling Inc., Cleveland, OH

Grind All Precision Tool Co., Inc., Warren, MI

Grind-All, Inc., Cleveland, OH

GrindC/O Inc., Chelmsford, MA

Grinding Service Mfg. Co., Bristol, CT

Grindworks Inc., Glendale, AZ

Grosmann Precision, Ballwin, MO

Grover Gundrilling, Inc., Norway, ME

Guill Tool Engineering Co., Inc., West Warwick, RI

Gulf South Machine/Drilex Corp., Houston, TX

Gurney Precision Machining, Saint Petersburg, FL

Gustav's Tool Die, Inc., Seguin, TX

H H Machine Company, Whittier, CA

H H Machine Shop of Akron, Inc., Akron, OH

H H Machined Products, Inc., Erie, PA

H K Machine Service Co. Inc., O'Fallon, MO

H M Precision Machining, Santa Clara, CA

H W Machine Company, Broomfield, COStart Printed Page 11987

H W Tool Company, Inc., Dover, NJ

H B Machine, Inc., Phoenix, AZ

H Brauning Company, Inc., Manassas, VA

H H Mercer, Inc., Mesquite, TX

H R M Machine, Inc., Costa Mesa, CA

H L Tool Co., Erie, PA

H M Machining Inc., Machesney Park, IL

Haberman Machine, Inc., St. Paul, MN

Hackett Precision Company, Nashville, TN

Hager Machine Tool, Inc., Houston, TX

Haig Precision Mfg. Corp., Campbell, CA

Hal-West Technologies, Inc., Kent, WA

Hamblen Gage Corporation, Indianapolis, IN

Hamill Manufacturing Company, Trafford, PA

Hamilton Mold Machine, Inc., Cleveland, OH

Hamilton Tool Company, Inc., Meadville, PA

Hamlin Steel Products, Inc., Akron, OH

Hammill Manufacturing Company, Toledo, OH

Hammon Precision Technologies, Hayward, CA

Hanks Pattern Company, Montrose, MN

Hanover Machine Company, Ashland, VA

Hans Rudolph, Inc., Kansas City, MO

Hansen Engineering, Harbor City, CA

Hansford Manufacturing Corp., Rochester, NY

Hanson Mold, St. Joseph, MI

Hardy Machine Inc., Hatfield, PA

Hardy-Reed Tool Die Co., Manitou Beach, MI

Harley Son, Inc., Yorba Linda, CA

Harris Machine/Finger Lakes Tool, Grinding LLC, Newark, NY

Harrison Enterprise, Inc., dba Accu-Tech, Phoenix, AZ

Haserodt Machine Tool, Inc., Cleveland, OH

Haskell Machine Tool, Inc., Homer, NY

Haumiller Engineering Company, Elgin, IL

Hawkeye Precision, Inc., Gilbert, AZ

Hawkins Machine Company, Inc., Coventry, RI

Hawkinson Mold Engineering Co., Alhambra, CA

Hayden Corporation, West Springfield, MA

Heatherington Machine Corp., Orlando, FL

Heinhold Engineering Machine Co., Inc., Salt Lake City, UT

Heitz Machine Manufacturing Co., Maryland Heights, MO

Hellebusch Tool Die, Inc., Washington, MO

Helm Precision, Ltd., Phoenix, AZ

Henman Engineering Machine, Muncie, IN

Hercules Machine Tool Die, Warren, MI

Herman Machine, Inc., Tallmadge, OH

Herrick Cowell Company, Hamden, CT

Hetrick Mfg., Inc., Lower Burrell, PA

Hewitt Machine Tool, Inc., Hewitt, TX

Heyden Mold Bench Company, Tallmadge, OH

Hi Tech Manufacturing, LLC, Greensboro, NC

Hi-Tech Machining Engineering LLC, Tucson, AZ

Hi-Tech Tool Industries, Inc., Troy, MI

Hi-Tech Tool, Inc., Lower Burrell, PA

Hiatt Metal Products Company, Muncie, IN

Hickory Machine Company, Inc., Newark, NY

High Tech Turning Co., Watertown, MA

High-Tech Industries, Holland, MI

Highland Mfg. Inc., Manchester, CT

Hill Engineering, Inc., A Mestek Co., Villa Park, IL

Hillcrest Tool Die, Inc., Titusville, PA

Hilton Tool Die Corporation, Rochester, NY

Hittle Machine Tool Company, Indianapolis, IN

HK Grinding, Phoenix, AZ

Hobson Motzer, Inc., Durham, CT

Hodon Manufacturing Inc., Willoughby, OH

Hoercher Industries, Inc., East Rochester, NY

Hoffman Custom Tool Die, Newport Beach, CA

Hoffstetter Tool Die, Clearwater, FL

Holland Hitch Co., Wylie, TX

Hollis Line Machine Co., Inc., Hollis, NH

Holmes Manufacturing Corporation, Cleveland, OH

Homeyer Tool and Die Co., Marthasville, MO

Hoop's Machine Welding, Inc., Denton, TX

Hoppe Tool, Inc., Chicopee, MA

Horizon Industries, Columbia, PA

Horizon Tool Die Corp., Grandville, MI

Houston Cutting Tools, Inc., Houston, TX

Howard Tool Co. Inc., Bangor, ME

Howland Machine Corporation, Colorado Springs, CO

Hubbell Machine Company, Inc., Cleveland, OH

Hulme Products, Ltd., Ashland, OH

Humboldt Instrument Company, San Leandro, CA

Hunt Machine Manufacturing Co., Tallmadge, OH

Hurricane Machine Company, L.L.C., McKinney, TX

Hyde Special Tools, Saegertown, PA

HydraWedge Corporation, El Segundo, CA

Hydrodyne Division of FPI, Inc., Burbank, CA

Hydromat, Inc., St. Louis, MO

Hygrade Precision Technologies, Inc., Plainville, CT

Hytron Manufacturing Company, Inc., Huntington Beach, CA

I T M, Inc., Shertz, TX

Ideal Grinding Technologies, Inc, Chatsworth, CA

Ideal Tool Co. Inc., Meadville, PA

ILM Tool, Inc., Hayward, CA

Imperial Machine Tool Company, Wadsworth, OH

Imperial Machining Co., Denver, CO

Imperial Mfg., Santa Fe Springs, CA

Imperial Newbould, Meadville, PA

Imperial Tool Manufacturing Co., Inc., Lexington, KY

Imperial Die Manufacturing Co., Strongsville, OH

IMS, Inc., Decatur, AL

Independent Forge Company, Orange, CA

Indiana Tool Die Company, Die Sets Inc., Indiana, PA

Industrial Grinding, Inc., Dayton, OH

Industrial Machine Tool Co., Inc., Nashville, TN

Industrial Machine Company, Oklahoma City, OK

Industrial Machining Corporation, Santa Clara, CA

Industrial Maintenance Electrical Corporation, Lavergne, TN

Industrial Mold + Machine, Twinsburg, OH

Industrial Molds, Inc., Rockford, IL

Industrial Precision Products, Inc., Oswego, NY

Industrial Precision, Inc., Westfield, MA

Industrial Tool Machine Co., Cuyahoga Falls, OH

Industrial Tool, Die, Engineering, Inc., Tucson, AZ

Industrial Tooling Technologies, Inc., Muskegon, MI

Industrial Custom Automatic Machine (ICAM), Dayton, OH

Industrial Babbitt Bearing Services, Inc., Gonzales, LA

Ingersoll Contract Manufacturing, Company, Loves Park, IL

Injection Mold Machine Company, Akron, OH

Inland Tool Manufacturing Co., Kansas City, KS

Inline Inc., Phoenix, AZ

Innex Industries, Inc., Rochester, NY

Innovative Systems Machine Tool, Inc., Toledo, OH

Insulate Inc., Auburn, WA

Integrated Machine Systems, Bethel, CT

Integrated Fabrication and Machine, Sharpsville, PA

Integrated Aerospace, Santa Ana, CA

Integrity Mfg. L.L.C., Farmington, CT

International Tooling Stamping, Inc., Mt. Juliet, TN

International Stamping Inc., Warwick, RI

Intrex Corporation, Louisville, CO

ISO Machining, Inc., Pleasanton, CA

ISYS Manufacturing, Inc., Concord, CA

Iverson Industries, Inc., Wyandotte, MI

J A Tool Company, Inc., Franklin, PA

J F Machine Inc., Cypress, CA

J J Tool Co., Inc., Louisville, KY

J L Development, Inc., Keithville, LA

J L EDM, Sunnyvale, CA

J M Machine, Inc., Fairport Harbor, OH

J M Unlimited, Ashland City, TN

J W Manufacturing, Phoenix, AZ

J B Tool Die Engineering, Inc., Fort Wayne, IN

J B Tool, Inc., Placentia, CA

J C B Precision Tool Mold, Inc., Commerce City, CO

J D Kauffman Machine Shop, Inc., Christiana, PA

J F Fredericks Tool Company, Inc., Farmington, CT

J I Machine Company, Inc., San Diego, CA

J K Tool Die, Inc., Apollo, PA

J M Fabrication Corporation, Arlington, TX

J M Mold South, Easley, SC

J M Mold, Inc., Piqua, OH

J M P Industries, Inc., Cleveland, OH

J M S Mold Engineering Co., Inc., South Bend, IN

J R Custom Metal Products, Inc., Wichita, KS

J Ross Miller Sons, Inc., Kimberton, PA

J S Die Mold, Inc., Byron Center, MI

J W Harwood Company, Cleveland, OH

J J Machine and Engineering, Inc., Commerce, CA

J G Machine Tool Co., Inc., Walworth, NY

J. C. Milling Co., Inc., Rockford, IL

J.B.A.T. t/a Cherry Hill Precision, Cherry Hill, NJ

J2 Precision CNC, Inc., Phoenix, AZ

Jackman Machining, Corona, CA

Jackson Heit Machine Company, Southampton, PA

Jacksonville Machine Inc., Jacksonville, IL

Jaco Tool Die, Inc., Grand Rapids, MI

Jaco Engineering, Anaheim, CA

Jamison Mfg. Co., North Royalton, OH

Jasco Tools Inc., Cutting Tools Division, Rochester, NYStart Printed Page 11988

Jason Tool Engineering, Inc., Garden Grove, CA

Jatco Machine Tool Company, Inc., Pittsburgh, PA

JBK Manufacturing Development,Co., Dayton, OH

Jena Tool Corporation, Dayton, OH

Jenkins Machine, Inc., Bethlehem, PA

Jenn Manufacturing Company, Inc., Warminster, PA

Jennison Corporation, Carnegie, PA

Jergens, Inc., Cleveland, OH

Jergens Tool and Mold, Englewood, OH

Jeryco Industries, Inc., Denton, TX

Jesel, Inc., Lakewood, NJ

Jesse Industries, Inc., Sparks, NV

Jet Products Co., Inc., Phoenix, AZ

Jet Products, Inc., East Bridgewater, MA

Jewett Machine Mfg. Co., Inc., Richmond, VA

Jig Grinding Service Company, Cleveland, OH

Jirgens Modern Tool Corporation, Kalamazoo, MI

JMC Technology Group, Indianapolis, IN

Johnson Tool, Inc., Fairview, PA

Johnson Precision, Inc., Buffalo, NY

Johnson Engineering Company, Indianapolis, IN

Joint Venture Acquisition Co., LLC, Saegertown, PA

Joint Production Technology, Inc., Macomb, MI

Jonco Tool Company, Racine, WI

JRM Machine Company, St. Paul, MN

Juell Machine Company, Inc., Pomona, CA

JWP Manufacturing, Inc., Santa Clara, CA

K A Tooling, Santa Ana, CA

K E Mfg. Company, Lee's Summit, MO

K H Mold Machine Division, Akron, OH

K H Precision Products, Inc., Honeoye Falls, NY

K M Machine-Fabricating, Inc., Cassopolis, MI

K S Tool Die, Inc., Meadville, PA

K S Tool Mfg. Company, Inc., Jamestown, NC

K L H Industries, Inc., Germantown, WI

K L N Precision Machining Sheetmetal Corp., Fremont, CA

K M F, Inc., Fairdale, KY

K M S Machine Works, Inc., Taunton, MA

K Mold Engineering, Inc., Granger, IN

K V, Inc., Huntingdon Valley, PA

K-Form, Inc., Tustin, CA

K. D. K. Inc., Prescott, AZ

K.C.K. Tool Die Co., Inc., Ferndale, MI

Ka-Wood Gear Machine Company, Madison Heights, MI

Kahre Brothers, Inc., Evansville, IN

Kalman Machining, Richmond, CA

Kalman Manufacturing, Morgan Hill, CA

Kamashian Engineering Inc., Bellflower, CA

Kanis Machine Manufacturing, Inc., Tewksbury, MA

Kansas City Screw Products Inc., Kansas City, MO

Karlee, Garland, TX

Karlson Machine Works, Inc., Phoenix, AZ

KARR Unlimited, Inc., Newaygo, MI

Karsten Precision, Phoenix, AZ

Kaskaskia Tool Machine, Inc., New Athens, IL

Kaufhold Machine Shop, Inc., Lancaster, PA

Kearflex Engineering Company, Warwick, RI

Keck-Schmidt Tool Die, South El Monte, CA

Kell-Strom Tool Company, Inc., Wethersfield, CT

Kellems Coe Tool Corporation, Jeffersonville, IN

Keller Technology Corporation, Tonawanda, NY

Kelley Industries, Inc., Eighty Four, PA

Kelltech Precision Machining, Inc., San Jose, CA

Kelly Thome, Pomona, CA

Kelm Manufacturing Company, Benton Harbor, MI

Kem-Mil-Co, Hayward, CA

Kemco Tool Machine Company, Fenton, MO

Kenlee Precision Corporation, Baltimore, MD

Kennametal Inc., Latrobe, PA

Kennebec Tool Die Co., Inc., Augusta, ME

Kennedy Bowden Machine Company, La Vergne, TN

Kennick Mold Die, Inc., Cleveland, OH

Kentucky Machine Tool Company, Louisville, KY

Kern Special Tools Company, Inc., New Britain, CT

Ketcham Diversified Tooling Inc., Cambridge, PA

Kewill ERP, Inc., Edina, MN

Keyes Machine Works, Inc., Gates, NY

Keystone Machine, Inc., Littlestown, PA

Kimberly Gear Spline, Inc., Phoenix, AZ

King Machine Engineering Co., Inc., Indianapolis, IN

King-Tek EDM Precion Machining, Inc., Fullerton, CA

Kipp Group, Ontario, CA

Kirca Precision, Rochester, NY

Klein Steel Service, Inc., Rochester, NY

Klix Tool Corporation, Syracuse, NY

Knight Industries Precision Machining,Inc., Corona, CA

Knowlton Manufacturing Company, Norwood, OH

Knust—S B O, Houston, TX

Kolar Inc., Ithaca, NY

Kordenbrock Tool Die Company, Cincinnati, OH

Kovacs Machine Tool Company, Inc., Wallingford, CT

Krause Tool, Inc., A-Z Corp. Div. of Krause Tool, Golden, CO

Kuester Tool Die Co., Inc., Quincy, IL

Kuhn Tool Die Co., Meadville, PA

Kurt J. Lesker Company, Clairton, PA

Kurt Manufacturing Company, Minneapolis, MN

L L Machine, Inc., Ludlow, MA

L L Tool Die, Gardena, CA

L P Machine, Inc., Santa Clara, CA

L A I Southwest, Inc., Phoenix, AZ

L H Carbide Corporation, Fort Wayne, IN

L P I Corporation, Hollywood, FL

L R G Corporation, Jeannette, PA

L R W Cutting Tools, Inc., Phoenix, AZ

L T L Company, Inc., Rockford, IL

L. P. Engineering Co., Carson, CA

Lake Manufacturing Co., Inc., Newburyport, MA

Lakeside Manufacturing Company, Stevensville, MI

Lamb Machine Tool Company, Indianapolis, IN

Lamina, Inc., Farmington Hills, MI

Lampin Corporation,Uxbridge, MA

Lancaster Machine Shop, Lancaster, TX

Lancaster Metal Products Company, Lancaster, OH

Lancaster Mold, Inc., Lancaster, PA

Land Specialties Manufacturing, Co., Inc., Raytown, MO

Lane Enterprise, Rochester, NY

Lane Punch Corporation, Salisbury, NC

Laneko Engineering Company, Ft. Washington, PA

Laneko Roll Form, Inc., Hatfield, PA

Lange Precision, Inc., Fullerton, CA

Langenau Manufacturing Company, Cleveland, OH

Lansing Tool Engineering Inc., Lansing, MI

Laron Incorporated, Kingman, AZ

Las Cruces Machine, Manufacturing Engineering, Las Cruces, NM

Laser Automation, Inc., Chagrin Falls, OH

Laser Beam Technology, Hayward, CA

Laser Fabrication Machine Co., Inc., Alexandria, AL

Laser Fare, Inc., Smithfield, RI

Laser Tool, Inc., Saegertown, PA

Lathrop Machine, Fremont, CA

Latva Machine, Inc., Newport, NH

Lavelle Machine,Westford, MA

Lavigne Manufacturing, Inc., Cranston, RI

Layke Incorporated, Phoenix, AZ

Layke Tool Manufacturing, Inc., Meadville, PA

Lead/M, L.L.C., Tempe, AZ

Ledford Engineering Company, Inc., Cedar Rapids, IA

Lee's Grinding, Inc., Cleveland, OH

Leech Industries, Inc., Meadville, PA

Lees Enterprise, Chatsworth, CA

Leese Co., Inc., Greensburg, PA

Leggett Platt, Inc., Whittier, CA

Leicester Die Tool, Inc., Leicester, MA

Lemco-Miller Corporation, Danvers, MA

Lenape Forge, Inc., West Chester, PA

Lenz Technology Inc., Mountain View, CA

Leonardi Manufacturing Co., Inc., Weedsport, NY

Lewis Aviation, Phoenix, AZ

Lewis Machine Tool Co. Inc., Cuba, MO

Lewis Machine and Tool Company, Milan, IL

Liberty Precision Industries, Ltd., Rochester, NY

Libra Precision Machining, Tecumseh, MI

Light Medium Fabricating, Inc., Willoughby, OH

Light Machines, Manchester, NH

Ligi Tool Engineering, Inc., Pompano Beach, FL

Lilly Software Associates, Inc., Hampton, NH

Limmco, Inc., New Albany, IN

Lindberg Heat Treating, Paramount, CA

Linmark Machine Products, Inc., Union, MO

Little Rhody Machine Repair, Inc., Coventry, RI

Littlecrest Machine Shop, Inc., Houston, TX

Lloyd Company, Houston, TX

Lobart Company, Pacoima, CA

Loecy Precision Mfg., Mentor, OH

LOMA Automation Technologies, Inc., Louisville, KY

Lordon Engineering, Gardena, CA

Loud Engineering and Manufacturing, Inc., Ontario, CA

Louis C. Morin Co. Inc., N. Billerica, MA

Loyal Machine Company, Inc., Chelsea, MA

Luick Quality Gage Tool, Inc., Muncie, IN

Lunar Tool Mold, Inc., North Royalton, OH

Lunar Tool Machinery Company, St. Louis, MO

Lunquist Manufacturing Corp., Rockford, IL

Lux Manufacturing, Inc., Sunnyvale, CAStart Printed Page 11989

Lynn Welding Co. Inc., Newington, CT

Lyons Tool Die Company, Meriden, CT

M D Loe Manufacturing, Inc., Benicia, CA

M H Engineering Company, Inc., Danvers, MA

M H Tool Die, Inc., Gadsden, AL

M J Grinding Tool Co., Holland, OH

M J Valve Services, Inc., Lafayette, LA

M C I Tool Die, Inc., Saginaw, MI

M C Mold Machine, Inc., Tallmadge, OH

M D F Tool Corporation, North Royalton, OH

M F Engineering Co. Inc., Bristol, RI

M J K Precision, Woodland Park, CO

M P E Machine Tool Inc., Corry, PA

M P Technologies, Inc., Brecksville, OH

M S Willett, Inc., Cockeysville, MD

M-Tron Manufacturing Company, Inc., San Fernando, CA

M-Ron Corporation, Glendale, AZ

M-C Fabrication, Inc., Olathe, KS

M H S Automation, Round Lake Beach, IL

M. R. Mold Engineering Corp., Brea, CA

M. J. Machining, Inc., Morgan Hill, CA

Mac Machine and Metal Works, Inc., Connersville, IN

Mac-Mold Base, Inc., Romeo, MI

Machine Incorporated, Stoughton, MA

Machine Specialties, Inc., Greensboro, NC

Machine Tooling, Inc., Cleveland, OH

Machine Works, Inc., Phoenix, AZ

Machinist Cooperative, Gilroy, CA

MacKay Manufacturing, Spokane, WA

Madden Machine Works, Torrance, CA

Maddox Metal Works, Inc., Dallas, TX

Madgett Enterprises Inc., Atascadero, CA

Magdic Precision Tooling, Inc., East McKeesport, PA

Maghielse Tool Corporation, Grand Rapids, MI

Magna Machine Tool Company, New Castle, IN

Magnum Manufacturing Center, Inc., Colorado Springs, CO

Magnus Mfg. Corp., Phelps, NY

Mahuta Tool Corp., Germantown, WI

Main Tool Mfg. Co., Inc., Minneapolis, MN

Maine Machine Products, South Paris, ME

Mainline Machine, Inc., Broussard, LA

Majer Precision Engineering, Inc., Tempe, AZ

Major Tool Machine, Inc., Indianapolis, IN

Makino, Mason, OH

Malmberg Engineering, Inc., Livermore, CA

Manda Machine Company, Inc., Dallas, TX

Manetek, Inc., Broussard, LA

Manheim Special Machine Shop, Manheim, PA

Mann Tool Company, Inc., Pacific, MO

Manufacturing Machine Corp., Pawtucket, RI

Manufacturing Service Corp., West Hartford, CT

ManufacturingQuote, Inc., Smyrna, GA

Marberry Machine, Inc., Houston, TX

Marco Manufacturing Company, Akron, OH

Marcy Machine, Inc., Grandview, MO

Mardon Tool Die Company, Inc., Rochester, NY

Marini Tool Die Company, Inc., Racine, WI

Marion Tool and Die, Inc., Terre Haute, IN

Maris Systems Design, Inc., Spencerport, NY

Markham Machine Co. Inc., Akron, OH

Marlin Tool, Inc., Cuyahoga Falls, OH

Marox Corporation, Holyoke, MA

Marquette Tool Die Company, St. Louis, MO

Marshall Manufacturing Company, Minneapolis, MN

Martinek Manufacturing, Fremont, CA

Martinelli Machine, San Leandro, CA

Masco Machine, Inc., Cleveland, OH

Massachusetts Machine Works Inc., Westwood, MA

Massey Industries, Inc., Houston, TX

Master Cutting Engineering, Inc., Santa Fe Springs, CA

Master Industries Inc., Piqua, OH

Master Precision Mold Technology, Greenville, MI

Master Precision Tool Corp., Sterling Heights, MI

Master Research Manufacturing, Inc., Norwalk, CA

Master Tool Die, Anaheim, CA

Master Tool Mold, Inc., Grafton, WI

Master Machining Manufacturing, Spokane, WA

Mastercraft Mold, Inc., Phoenix, AZ

Mastercraft Tool Machine Co., Inc., Southington, CT

Mastercraft Tool Co., St. Louis, MO

MaTech Machining Technologies, Inc., Hebron, MD

Matrix Tool Company, Fraser, MI

Matthews Gauge, Inc., Santa Ana, CA

Maudlin Son Manufacturing Co., Inc., Kemah, TX

May Tool Die, Inc., North Royalton, OH

May Technology Mfg., Inc., Kansas City, MO

Mayfran International, Cleveland, OH

McAfee Tool Die, Inc., Uniontown, OH

McCurdy Tool Machine Inc., Caledonia, IL

MCD Plastics Manufacturing Inc, Piqua, OH

McFarland Machine and Engineering, Tempe, AZ

McGill Manufacturing Company, Flint, MI

McIvor Manufacturing, Inc., Buffalo, NY

McKee Carbide Tool Division, Olanta, PA

McKenzie Automation Systems, Inc, Rochester, NY

McNeal Enterprises, Inc., San Jose, CA

McNeil Industries, Inc., Willoughby, OH

McNeill Manufacturing Company, Oakland, CA

McSwain Manufacturing Corp., Cincinnati, OH

MCTD, Inc., Michigan City, IN

Meadows Manufacturing Co., Inc., Sunnyvale, CA

Meadville Plating Company, Inc., Meadville, PA

Meadville Tool Grinding, Meadville, PA

Mechanical Drive Components, Inc,Chicopee, MA

Mechanical Manufacturing Corp., Sunrise, FL

Mechanical Metal Finishing Co., Gardena, CA

Mechanized Enterprises, Inc., Anaheim, CA

Medal Industries, Mesa, AZ

Medved Tool Die Company, Milwaukee, WI

Menegay Machine Tool Company, Canton, OH

Mercer Machine Company, Inc., Indianapolis, IN

Mercier Tool Die Company, Canton, OH

Merit Gage, Inc., St. Louis Park, MN

Merritt Tool Company, Inc., Kilgore, TX

Metal Cutting Specialists, Inc., Houston, TX

Metal Form Engineering, Redlands, CA

Metal Processors Inc., Stevensville, MI

Metal-Tek Machining Inc., Phoenix, AZ

Metalcraft, Inc., Tempe, AZ

Metallon, Inc., Thomaston, CT

Metals USA, Flagg Steel Co., Inc., St. Louis, MO

Metalsa—Perfek, Novi, MI

Metco Manufacturing Company, Inc., Warrington, PA

Metco L.L.C., Chatsworth, CA

Metplas, Inc., Natrona Heights, PA

Metric Machining, Monrovia, CA

Metro Manufacturing, Inc., Phoenix, AZ

Miami Tool Die, Inc., Huntington, IN

Michigan Machining Inc., Mt. Morris, MI

Micro Chrome Lapping, Inc., San Jose, CA

Micro Facture LLC, Mountville, PA

Micro Instrument Corporation, Rochester, NY

Micro Manufacturing, Caledonia, MI

Micro Matic Tool, Inc., Youngstown, OH

Micro Precision Company, Houston, TX

Micro Punch Die Company, Rockford, IL

Micro Surface Engineering, Inc., Bal-tec Division, Los Angeles, CA

Micro Tool Manufacturing, Inc., Meadville, PA

Micro-Tec, Chatsworth, CA

Micro-Tech Machine Inc., Newark, NY

Micro-Tronics, Inc., Tempe, AZ

Microfinish, Clayton, OH

Micropulse West, Inc., Tempe, AZ

Mid-Central Manufacturing, Inc., Wichita, KS

Mid-Continent Engineering, Inc., Minneapolis, MN

Mid-State Manufacturing, Inc., Milldale, CT

Mid-States Forging Die Tool,Co., Inc., Rockford, IL

Mid-Conn Precision Manufacturing LLC, Bristol, CT

Middle River Machine Services, Inc., Baltimore, MD

Midland Precision Machining, Inc., Tempe, AZ

Midway Mfg. Inc., Elyria, OH

Midwest Tool Die Corporation, Fort Wayne, IN

Midwest Tool Engineering Co., Dayton, OH

Mikron Machine, Inc., Cranesville, PA

Mil-Tool Plastics Inc., Zephyrhills, FL

Milco Wire EDM, Inc., Milco Waterjet, Huntington Beach, CA

Millat Industries Corp., Dayton, OH

Miller Equipment Corporation, Richmond, VA

Miller Machine Design, Inc., Charlotte, NC

Miller Mold Company, Saginaw, MI

Millrite Machine Inc., Westfield, MA

Milrose Industries, Cleveland, OH

Miltronics, Inc., Painesville, OH

Milwaukee Precision Corporation, Milwaukee, WI

Milwaukee Punch Corporation, Greendale, WI

Minco Tool Mold Inc., Dayton, OH

Mission Tool Manufacturing Co., Inc., Hayward, CA

Mitchell Machine, Inc., Springfield, MA

Mitchum Schaefer, Inc., Indianapolis, IN

Mittler Brothers Machine Tool, Division-Mittler Corporation, Foristell, MO

MKR Fabricators, Saginaw, MI

Mod Tech Industries, Inc., Shawano, WI

Model Mold Machine Company, Inc., Noblesville, IN

Model Machine Company, Inc., Baltimore, MD

Modern Machine Company, San Jose, CA

Modern Machine Company, Bay City, MIStart Printed Page 11990

Modern Mold, Inc., Grand Rapids, MI

Modern Technologies Corp., Xenia, OH

Modern Industries Inc., Phoenix, AZ

Modular Mining Systems, Inc., Tucson, AZ

Mold Threads Inc., Branford, CT

Moldcraft, Inc., Depew, NY

Moldesign, Inc., Knoxville, TN

Monks Manufacturing Co., Inc., Wilmington, MA

Monroe Tool Die Co., Rochester, NY

Monsees Tool Die, Inc., Rochester, NY

Montgomery Machine Company, Houston, TX

Moon Tool Die Inc., Conneaut Lake, PA

Moore Quality Tooling, Inc., Dayton, OH

Moore Gear Mfg. Co., Inc., Hermann, MO

Moore's Ideal Products, Covina, CA

Morlin Incorporated, Erie, PA

Morris Machine Co., Inc., Indianapolis, IN

Morris Machining, Inc., Oak Leaf, TX

Morton Company, Inc., Wilmington, MA

Moseys' Production Machinists, Inc., Anaheim, CA

Moss Machine/Module, San Francisco, CA

Mound Laser and Photonics Center, Miamisburg, OH

Mountain States Automation, Inc., Englewood, CO

MPC Industries, Inc., Irvine, CA

MRC Technologies, Buffalo, NY

Mueller Machine Tool Company, Berkeley, MO

Muller Tool Inc., Cheektowaga, NY

Multi-Tool, Inc., Saegertown, PA

Multi Dimensional Machining Inc., Englewood, CO

Mutual Tool Die, Inc., Dayton, OH

Mutual Precision, Inc., West Springfield, MA

Myers Precision Grinding Company, Inc., Warrensville Hts, OH

Myers Industries, Akro-Mils Division, Akron, OH

Myles Tool Co., Inc., Sanborn, NY

N C Dynamics, Inc., Long Beach, CA

N D T Industries, Inc., New Deal Tool Machine, Dayton, OH

N E T Die Company, Inc., Fulton, NY

Nashville Machine Company, Inc., Nashville, TN

National Carbide Die, McKeesport, PA

National Jet Company, Inc., LaVale, MD

National Tool Machine Co. Inc., East St. Louis, IL

National Tool Manufacturing Co., Newburg Park, CA

Nationwide Precision Products, Corp., Rochester, NY

Nel-Mac Tool Mfg. Inc., McKinney, TX

Nelson Bros. Strom Co., Inc., Racine, WI

Nelson Engineering, Garden Grove, CA

Nelson Grinding, Inc., Fullerton, CA

Nelson Precision Drilling Co., Glastonbury, CT

Nemes Machine Co., Cuyahoga, OH

Nerjan Development Company, Stamford, CT

Neutronics, Inc., Phoenix, AZ

New Century Fabricators, Inc., New Iberia, LA

New Century Remanufacturing, Inc, Santa Fe Springs, CA

New Cov Fabrication Inc., Rochester, NY

New England Die Co., Inc., Waterbury, CT

New England Precision Grinding, Inc., Holliston, MA

New Standard Corporation, York, PA

Newman Machine Company, Inc., Greensboro, NC

Newtek Manufacturing, Sunnyvale, CA

Newton Tool Manufacturing Co., Swedesboro, NJ

Niagara Punch Die Corporation, Buffalo, NY

Nifty Bar, Inc., Penfield, NY

Niles Machine Tool Works, Inc., Livermore, CA

Nixon Tool Co., Inc., Richmond, IN

Nordon Tool Mold, Inc., Rochester, NY

Noremac Manufacturing Corp., Westboro, MA

Norman Noble, Inc., Cleveland, OH

Normike Industries, Inc., Plainville, CT

North Canton Tool Company, Inc., Canton, OH

North Central Tool Die, Inc., Houston, TX

North Coast Tool Mold Corp., Cleveland, OH

North Easton Machine Co., Inc., North Easton, MA

North Florida Tool Engineering, Inc., Jacksonville, FL

Northeast E D M, Newburyport, MA

Northeast Manufacturing Co., Inc., Stoneham, MA

Northeast Tool Manufacturing, Co., Indian Trail, NC

Northern Machine Tool Company, Muskegon, MI

Northern Tool Gage, Inc., North Royalton, OH

Northmont Tool Gage Inc., Clayton, OH

Northwest Machine Works, Inc., Grand Junction, CO

Northwest Tool Die Company, Inc., Grand Rapids, MI

Northwest Tool Die, Inc., Neadville, PA

Northwood Industries, Inc., Perrysburg, OH

Norton Industries Inc., Hayward, CA

Norv's Molds, Inc., Nyssa, OR

Norwood Tool Company, Dayton, OH

Nova Manufacturing Company, North Hollywood, CA

Now-Tech Industries Inc., Lackawanna, NY

NRL Associates, Inc., Stevensville, MD

Nu-Tech Industries, Grandview, MO

Nu-Tool Industries, Inc., North Royalton, OH

Numeric Machine, Fremont, CA

Numeric Machining Co., Inc., West Springfield, MA

Numerical Concepts, Inc., Terre Haute, IN

Numerical Precision, Inc., Wheeling, IL

Numerical Productions, Inc., Indianapolis, IN

Numet Machine, Stratford, CT

NuTec Tooling Systems, Inc., Meadville, PA

O S Machine Company, Inc., Latrobe, PA

O-A, Inc., Agawam, MA

O E M Industries, Inc., Dallas, TX

O E M, Inc., Corvallis, OR

O-D Tool Cutter Inc., Mansfield, MA

O'Keefe Ceramics, Woodland Park, CO

O'Neal Tool Machine Co., Inc., DeSoto, MO

Obars Machine Tool Company, Toledo, OH

Oberg Industries Inc., Freeport, PA

Oconee Machine Tool Company, Inc., Westminster, SC

Oconnor Engineering Laboratories, Costa Mesa, CA

Ohio Gasket Shim Company, Akron, OH

Ohio Transitional Machine Tool, Inc., Toledo, OH

Ohlemacher Mold Die, Strongsville, OH

Oilfield Die Manufacturing Co., Lafayette, LA

Okuma America Corporation, Charlotte, NC

Olson Mfg. Distribution Inc., Shawnee, KS

Omax Corporation, Kent, WA

Omega One, Inc., Maple Heights, OH

Omega Tool, Inc., Menomonee Falls, WI

Omni Machine Works, Inc., Conyers, GA

Omni Tool, Inc., Winston Salem, NC

Optimized EDM, Santa Clara, CA

Orchard Machine, Inc., Byron Center, MI

Orenda National Aerospace, LLC, Glendale, AZ

ORIX Financial Services Inc., Charlotte, NC

Osborn Products, Inc., Phoenix, AZ

Osley Whitney, Inc., Westfield, MA

Overland Bolling, Dallas, TX

Overton Sons Tool Die Co. Inc., Mooresville, IN

Overton Corporation, Willoughby, OH

P A Tool Die, Inc., Rochester, NY

P N Machine Company, Inc., Houston, TX

P P Mold Die, Inc., Tallmadge, OH

P R Industries, Inc., Rochester, NY

P-K Tool Manufacturing Company, Chicago, IL

P C Tool, Meadville, PA

P I A Group, Inc., Cincinnati, OH

P. Tool Die Company, Inc., N. Chili, NY

Pacific Bearing Company, Rockford, IL

Pacific Precision Machine, Inc., San Carlos, CA

Pacific Tool Die, Inc., Brunswick, OH

Pahl Tool Services, Cleveland, OH

Palma Tool Die Company, Inc., Lancaster, NY

Palmer Manufacturing Company, Malden, MA

Palmer Machine Company Inc., Conway, NH

Pankl Aerospace Systems, Cerritos, CA

Pantera, Inc., Torrington, CT

Parallax, Inc., Largo, FL

Paramount Machine Tool Corp., Fairfield, NJ

Park Hill Machine, Inc., Lancaster, PA

Parker Plastics Corporation, Pittsburgh, PA

Parr-Green Mold and Machine Co., North Canton, OH

Parris Tool Die Company, Goodlettsville, TN

Parrish Machine, Inc., South Bend, IN

Pasco Tool Die, Inc., Meadville, PA

Patco Machine Fab, Inc., Houston, TX

Path Technologies, Inc., Mentor, OH

Patkus Machine Company, Rockford, IL

Patriot Machine, Inc., St. Charles, MO

Patten Tool Engineering, Inc., Kittery, ME

Paul E. Seymour Tool Die Co., North East, PA

PDQ Machine, Inc., Machesney Park, IL

PDS Industries, Inc., Irwin, PA

Peerless Precision, Inc., Westfield, MA

Pegasus/Triumph Manufacturing, Inc., East Berlin, CT

Peko Precision Products, Rochester, NY

Pell Engineering Manufacturing, Inc., Pelham, NH

Penco Precision, Fontana, CA

Pendleton Tool Company, Inc., Erie, PA

Peninsula Screw Machine Products, Inc., Belmont, CA

Penn United Tech, Inc., Saxonburg, PA

Penn State Tool Die Corp., North Huntingdon, PA

Pennoyer-Dodge Company, Glendale, CA

Pennsylvania Tool Gages, Inc., Meadville, PA

Pennsylvania Crusher, Cuyahoga Falls, OH

Perfection Tool Mold Corp., Dayton, OH

Perfecto Tool Engineering Co., Anderson, INStart Printed Page 11991

Perfekta, Inc., Wichita, KS

Performance Grinding Manufacturing, Inc., Tempe, AZ

Performance Machining Inc., Irwin, PA

Perlos, Inc., Fort Worth, TX

Perry Tool Research Inc., Hayward, CA

Petersen Precision Engineering, LLC, Redwood City, CA

Peterson Jig Fixture, Inc., Rockford, MI

Petro-Chem Industries, Inc., Stafford, TX

Pettey Machine Works, Inc., Trinity, AL

Phil-Coin Machine Tool Co., Inc., Hudson, MA

Philips Machining Company, Inc., Coopersville, MI

Phoenix Tool Gage, Inc., Phoenix, AZ

Phoenix Metallics, Phoenix, AZ

Phoenix Grinding, Div. of Cal-Disc Grinding Co., Phoenix, AZ

Piece-Maker Company, Troy, MI

Pierce Products, Inc., Cleveland, OH

Pierson Precision Inc., Campbell, CA

Pinehurst Tool Die, Conneaut Lake, PA

Pinnacle Precision Co., Glassport, PA

Pinnacle Engineering Co., Inc., Manchester, MI

Pinnacle Manufacturing Co., Inc., Chandler, AZ

Pioneer Tool Die Company, Akron, OH

Pioneer Tool Die, Inc., Meadville, PA

Pioneer Tool Die Machine Co., Inc., Ivyland, PA

Pioneer Precision Grinding, Inc., West Springfield, MA

Pioneer Industries, Seattle, WA

Piper Plastics, Inc., Chandler, AZ

Pitt-Tex, Latrobe, PA

Plainfield Stamping Illinois, Inc., Plainfield, IL

Plano Machine Instrument Inc., Gainesville, TX


Plastic Mold Technology Inc., Grand Rapids, MI

Plastipak Packaging, Inc., Package Development Plant 67, Medina, OH

Pleasanton Tool and Manufacturing, Inc., Pleasanton, CA

Plesh Industries, Inc., Buffalo, NY

PMR, Inc., Avon, OH

Pol-Tek Industries, Ltd., Cheektowaga, NY

Polynetics, Inc., Fullerton, CA

Polytec Products Corporation, Menlo Park, CA

Ponderosa Industries, Inc., Denver, CO

Popp Machine Tool, Inc., Louisville, KY

Port City Machine Tool Company, Muskegon Heights, MI

Portage Knife Company, Inc., Mogadore, OH

Post Products, Inc., Kent, OH

Powers Bros. Machine, Inc., Montebello, CA

Powill Manufacturing Engineering, Inc., Phoenix, AZ

PQ Enterprise, L.L.C., Grand Rapids, MI

PR Machine Works, Inc., Mansfield, OH

Practical Machine Company, Barberton, OH

Precise Tool Engineering, Tucson, AZ

Precise Tool Die, Inc., Leechburg, PA

Precise Technologies Inc., Largo, FL

Precise Engineering, Lowell, MI

Precise Products Corporation, Minneapolis, MN

Precision Components Group, Inc., Fremont, CA

Precision Wire EDM Service Inc., Grand Rapids, MI

Precision Wire Cut Corporation, Waterbury, CT

Precision Aircraft Components, Inc., Dayton, OH

Precision Aircraft Machining Co., Inc. dba PAMCO, Sun Valley, CA

Precision Automated Machining, Englewood, CO

Precision Balancing Analyzing Co., Mentor, OH

Precision Boring Company, Detroit, MI

Precision Die Stamping Inc., Tempe, AZ

Precision Engineering Mfg. Co., PEMCO, Haymarket, VA

Precision Engineering, Inc., Uxbridge, MA

Precision Gage Tool Company, Dayton, OH

Precision Gage, Inc., Tempe, AZ

Precision Grinding Mfg. Corp., Rochester, NY

Precision Grinding Inc., Phoenix, AZ

Precision Grinding, Inc., Birmingham, AL

Precision Identity Corporation, Campbell, CA

Precision Industries, Inc., Providence, RI

Precision Machine Engineering, Inc., Phoenix, AZ

Precision Machine Instrument Co., Houston, TX

Precision Machine Tool Co., Longview, TX

Precision Machine Company, Lancaster, PA

Precision Machine Rebuilding, Inc., Rogers, MN

Precision Machine Works, Aiken, SC

Precision Manufacturing, Technologies, Inc., Grand Junction, CO

Precision Matters, Inc., San Francisco, CA

Precision Metal Crafters, Ltd., Greensburg, PA

Precision Metal Fabrication, Dayton, OH

Precision Metal Tooling, Inc., San Leandro, CA

Precision Mold Engineering, Inc., Warren, MI

Precision Mold Base Corporation, Tempe, AZ

Precision Mold Welding, Inc., Little Rock, AR

Precision Mold, Inc., Kent, WA

Precision Piece Parts Inc., Mishawaka, IN

Precision Products Inc., Greenwood, IN

Precision Resource, California Division, Huntington Beach, CA

Precision Resource Tool Machine, Division, Shelton, CT

Precision Resources, Hawthorne, CA

Precision Specialists, Inc., West Berlin, NJ

Precision Specialties, San Jose, CA

Precision Stamping Tool, Inc., Irvine, CA

Precision Stamping, Inc., Farmers Branch, TX

Precision Tool Mold, Inc., Clearwater, FL

Precision Tool Work, Inc., New Iberia, LA

Precon, Inc., Anaheim, CA

Preferred Tool Company, Inc., Seymour, IN

Preferred Tool Die Co., Inc., Comstock Park, MI

Prescott Aerospace, Inc., Prescott Valley, AZ

Pressco Products, Kent, WA

Prestige Mold Incorporated, Rancho Cucamonga, CA

Price Products, Inc., Escondido, CA

Pride, dba Pride Industries, Brooklym Park, MN

Prima Die Castings, Inc., Clearwater, FL

Prime-Co Tool Inc., East Rochester, NY

Primeway Tool Engineering Co., Div. of Cleary Developments, Inc., Madison Heights, MI

Prince Machine, Holland, MI

Pro-Mold, Inc., Rochester, NY

Pro-Tech Machine, Inc., Burton, MI

Process Equipment Company, Tipp City, OH

Product Engineering Company, Columbus, IN

Production Tool Mfg. Co., Portland, OR

Production Saw Works, Inc., North Hollywood, CA

Production Machining Mfg., Dallas, TX

Producto Machine Company, Bridgeport, CT

Profab Industries L.L.C., Phoenix, AZ

Professional Instruments Co., Inc., Hopkins, MN

Professional Machine Tool Co., Gallatin, TN

Professional Machine Tool, Inc., Valley Center, KS

Proficient Machining Co., Inc., Mentor, OH

Profile Grinding, Inc., Cleveland, OH

Proformance Manufacturing, Inc., Corona, CA

Progressive Metallizing Machine Company, Inc., Akron, OH

Progressive Concepts Machining, Pleasanton, CA

Progressive Machine Design, LLC, Victor, NY

Progressive Tool Die, Inc., Meadville, PA

Progressive Tool Company, Waterloo, IA

Progressive Tool Die, Inc., Gardena, CA

Promax Tool Co., Rancho Cordova, CA

ProMold, Inc., Cuyahoga Falls, OH

Prompt Machine Products, Inc., Chatsworth, CA

Proper Cutter, Inc., Guys Mills, PA

Proper Mold Engineering, Inc., Center Line, MI

Proteus Manufacturing Co., Inc., Woburn, MA

Proto Machine Manufacturing, Kent, OH

Proto-Design, Inc., Redmond, WA

Protonics Engineering Corp., Cerritos, CA

Prototype Plastic Mold Co., Inc., Middletown, CT

Puehler Tool Company, Valley View, OH

Pullbrite, Inc., Fremont, CA

Punch Press Products, Inc., Los Angeles, CA

Punchcraft Company—Subsidiary of MascoTech, Inc., Warren, MI

Qualfab Machining, Lodi, CA

Quality Tool Company, Toledo, OH

Quality Machining, Inc., Waunakee, WI

Quality Precision, Inc., Hayward, CA

Quality Mold Engineering, QME Inc., Baroda, MI

Quality Mold Die, Inc., Santa Ana, CA

Quality Centerless Grinding Corp., Middlefield, CT

Quality Machining Technology, Inc., Oakdale, CA

Quality Machine Engineering, Inc., Santa Rosa, CA

Quality Grinding and Machine, Rainbow City, AL

Quality Grinding Machining, Inc., Bridgeport, CT

Quality Engineering Services, Wallingford, CT

Quick Action Mfg. Co., St. Louis, MO

Quick-Way Stampings, Euless, TX

R W Machine, Inc., Houston, TX

R T R Slotting Machine Inc., Cuyahoga Falls, OH

R S Precision Industries, Inc., Farmingdale, NY

R O C Carbon Company, Houston, TX

R Davis EDM, Anaheim, CA

R S Redco, Inc., Rockland, MA

R M I, Van Nuys, CAStart Printed Page 11992

R J S Corporation, Akron, OH

R G F Machining Technologies, Canon City, CO

R F Cook Manufacturing Co., Stow, OH

R E F Machine Company, Inc., Middlefield, CT

R D Machine Shop, Dallas, TX

R D Specialty/Manco, Phoenix, AZ

R D Tool Engineering, Lee's Summit, MO

R G Precision Tool Inc., Thomaston, CT

R H Manufacturing Inc., Kingston, PA

R J Tool, Inc., Brookville, OH

R M Machine Tool, Freeland, MI

R M Manufacturing Company, Niles, MI

R M Mold Manufacturing Co., Inc., Bloomsbury, NJ

R R Precision Machine, Inc., Wichita, KS

R S EDM, Inc., W. Springfield, MA

R S Machining, Inc., Oakville, MO

R D C Machine, Inc., Santa Clara, CA

R. W. Smith Company, Inc., Dallas, TX

R. T. Callahan Machine Products, Inc., Harleysville, PA

Radiant Technologies, Phoenix, AZ

Rainbow Tool Machine Co., Inc., Gadsden, AL

Raloid Corporation, Reisterstown, MD

Ralph Stockton Valve Products, Inc., Houston, TX

Ram Tool, Inc., Grafton, WI

Rapid-Line Inc., Grand Rapids, MI

Rapidac Machine Corporation, Rochester, NY

Ratnik Industries, Inc., Victor, NY

Rawlings Engineering, Macon, GA

Re-Del Engineering, Campbell, CA

Realco Diversified, Inc., Meadville, PA

Reardon Machine Co., Inc., St. Joseph, MO

Reata Engineering Machine, Works, Inc., Englewood, CO

Reber Machine Tool Company, Muncie, IN

RedSpark, Inc., San Francisco, CA

Reed Instrument Company, Houston, TX

Reese Machine Company, Inc., Ashtabula, OH

Reg-Ellen Machine Tool Corp., Rockford, IL

Reichert Stamping Company, Toledo, OH

Reitz Tool Die Company, Inc., Walbridge, OH

Reitz Tool, Inc., Cochranton, PA

Reko International Sales, Inc., Troy, MI

Reliable EDM, Inc., Houston, TX

Remarc Manufacturing Inc., Hayward, CA

Remmele Engineering, Inc., St. Paul, MN

Remtex, Inc., Longview, TX

Reny Company Inc., El Monte, CA

REO Hydro-Pierce Inc., Detroit, MI

Repairtech International, Inc., Van Nuys, CA

Repko Tool Inc., Meadville, PA

Republic-Lagun, Carson, CA

Republic Industries, Louisville, KY

Research Tool Inc., East Haven, CT

Reuther Mold Manufacturing Co., Cuyahoga Falls, OH

Reward Manufacturing, Sun Valley, CA

Reynolds Manufacturing Co., Inc., Rock Island, IL

Rheaco Inc., Grand Prairie, TX

Rhode Island Centerless, Inc., Johnston, RI

Rich Tool Die Company, Scarborough, ME

Richard Manufacturing Company, Inc., Milford, CT

Richard Tool Die Corporation, New Hudson, MI

Richard's Grinding, Inc., Cleveland, OH

Richards Machine Tool Company, Inc., Lancaster, NY

Richsal Corporation, Elyria, OH

Rick Sanford Machine Company, San Leandro, CA

Rickman Machine Company, Wichita, KS

Rid-Lom Precision Tool Corp., Rochester, NY

Ridge Machine Welding Company, Toronto, OH

Riggins Engineering, Inc., Van Nuys, CA

Right Tool Die, Inc., Toledo, OH

Rima Enterprises, Huntington Beach, CA

Rite-Way Industries Inc., Louisville, KY

Riverview Machine Company, Inc., Holyoke, MA

Riviera Tool Company, Grand Rapids, MI

ROA Tool, Inc., Los Angeles, CA

Robb Machine Tool Co., Wyoming, MI

Robert C. Weisheit Co., Franklin Park, IL

Robert C. Reetz Company, Inc., Pawtucket, RI

Roberts Tool Die Company, Chillicothe, MO

Roberts Tool Company, Inc., Chatsworth, CA

Robrad Tool Engineering, Mesa, AZ

Rochester Precision Machine, Inc., Rochester, MN

Rochester Automated Systems, Inc., Rochester, NY

Rochester Gear, Inc., Rochester, NY

Rochester Manufacturing, Wellington, OH

Rockburl Industries Inc., Rochester, NY

Rockford Process Control, Inc., Rockford, IL

Rockford Tool Manufacturing Co., Rockford, IL

Rockford Toolcraft, Inc., Rockford, IL

Rockhill Machining Industries Inc., Barberton, OH

Rockstedt Tool Die, Brunswick, OH

Rocon Manufacturing Corporation, Rochester, NY

Rogers Associates Machine Tool, Corporation, Rochester, NY

Rogers Enterprises, Rochester, NY

Roll Kraft, Mentor, OH

Romac Electronics, Inc., Plainview, NY

Romold Inc., Rochester, NY

Ron Grob Company, Loveland, CO

Ronart Industries, Inc., Detroit, MI

Ronlen Industries, Inc., Brunswick, OH

Rons Racing Products, Inc., Tucson, AZ

Royal Wire Products, Inc., N. Royalton, OH

Royalton Manufacturing, Inc., Cleveland, OH

Royster's Machine Shop, LLC, Henderson, KY

Rozal Industries, Inc., Farmingdale, NY

RRR Development Co., Inc., North Canton, OH

RTS Wright Industries, Nashville, TN

Rubbermaid, Inc.—Mold Division, Wooster, OH

Runner Tool Die Co., Inc., Akron, OH

Ruoff Sons, Inc., Runnemede, NJ

Ryan Industries Inc., York, PA

S R Tool Inc., Lakeville, NY

S B Tool Die Co., Inc., Lancaster, PA

S P Machine Tool Co., L.L.C., Toledo, OH

S R CNC Machining, Arleta, CA

S C Manufacturing, Akron, OH

S D S Machine, Inc., Livermore, CA

S G S Tool Company, Munroe Falls, OH

S L P Machine, Inc., Ham Lake, MN

S P M/Anaheim, Anaheim, CA

S P S Technologies, Santa Ana, CA

S. C. Machine, Chatsworth, CA

S.M.G. LLC, Cheektowaga, NY

Sabre Machining Center, Inc., Dayton, OH

Saeilo Manufacturing Industries, Blauvelt, NY

Safety-Kleen, Columbia, SC

Sage Machine Fabricating, Houston, TX

Sagehill Engineering, Inc., Menlo Park, CA

Saginaw Products Corporation, Saginaw, MI

Saint-Gobain Advanced Ceramics, Colorado Springs, CO

Saint-Gobain Semicon Equipment, Inc., San Jose, CA

Salamon Manufacturing Inc., Middletown, CT

Saliba Industries, Inc., Lake Forest, IL

Salomon Smith Barney, Washington, DC

Samax Precision, Inc., Sunnyvale, CA

San Diego Swiss Machining, Inc., Chula Vista, CA

San Jose Laser, San Jose, CA

Sanders Tool Mould Company, Hendersonville, TN

Sandor Tool Manufacturing Co., Lawrence, MA

Sandy Bay Machine, Rockport, MA

Santin Engineering, Inc., West Peabody, MA

Satran Technical Enterprises, Mayer, AZ

Sattler Machine Products, Inc., Sharon Center, OH

Savco Manufacturing Co. Inc., Union, MO

Sawing Services Co., Chatsworth, CA

Sawtech, Lawrence, MA

Schaffer Grinding Company, Inc., Montebello, CA

Schill Corp., Toledo, OH

Schlitter Tool, Warren, MI

Schmald Tool Die Inc., Burton, MI

Schmiede Corporation, Tullahoma, TN

Schneider Marquard, Inc., Newton, NJ

Schoitz Engineering, Inc., Waterloo, IA

Schuetz Tool Die, Inc., Hiawatha, KS

Schulze Tool Company, Independence, MO

Schwab Machine, Inc., Sandusky, OH

Schwartz Industries, Inc., Warren, MI

Scientiam Machine Co., Harbor City, CA

Scott County Machine Tool Co., Inc., Scottsburg, IN

Sebewaing Tool Engineering Co., Sebewaing, MI

Sebra,Tucson, AZ

Seemcor Inc., Englewood, NJ

Select Tool and Die, Toledo, OH

Select Manufacturing Company, Rainbow City, AL

Select Tool Eng., Inc., Elkhart, IN

Select Tool Die—Tool Div., Dayton, OH

Select Industrial Systems Inc., Fairborn, OH

SelfLube, Coopersville, MI

Selzer Tool Die, Inc., Elyria, OH

Sematool Mold Die Co., Santa Clara, CA

Serrano Industries Inc., Santa Fe Springs, CA

Service Tool Die, Inc., Henderson, KY

Service Manufacturing and Engineering, Anaheim, CA

Setters Tools, Inc., Piedmont, SC

Sharon Center Mold Die, Sharon Center, OH

Shaw Industries, Inc., Franklin, PA

Shear Tool, Inc., Saginaw, MI

Sheets Tool Manufacturing, Inc., Saegertown, PA

Shelby Engineering Company, Inc., Indianapolis, IN

Sherer Manufacturing Incorporated, Clearwater, FL

Sherlock Machine Company, Clearwater, FL

Sherman Tool Gage, Erie, PA

Shiloh Industries, Wellington Die Division, Wellington, OH

Shookus Special Tools, Inc., Raymond, NHStart Printed Page 11993

Shop Tech Industrial Software Corp., Rocky Hill, CT

Sibley Machine Foundry Corp., South Bend, IN

Sieger Engineering, Inc., S. San Francisco, CA

Sigma Precision Mfg., Inc., Aston, PA

Signa Molds Engineering, Sylmar, CA

Signal Machine Company, New Holland, PA

Silicon Valley Mfg., Fremont, CA

Sipco Molding Technologies, Meadville, PA

Sirius Enterprises, Inc., Dallas, TX

Sirois Tool Co. Inc., Berlin, CT

Six Sigma, Louisville, KY

Ski-Way Machine Products Company, Euclid, OH

Skillcraft Machine Tool Company, West Hartford, CT

Skulsky, Inc., Gardena, CA

Skyline Manufacturing Corp., Nashville, TN

Skylon Mold Machining, Sugar Grove, PA

Skyway Manufacturing Corporation, Phoenix, AZ

Smith-Renaud, Inc., Cheshire, CT

Smith's Machine, Cottondale, AL

Smithfield Manufacturing, Inc., Clarksville, TN

Snyder Systems, Benicia, CA

Solar Tool Die, Inc., Kansas City, MO

Sonic Machine Tool, Inc., Tempe, AZ

Sonoma Precision Mfg. Co., Santa Rosa, CA

Sonora Precision Molds, Inc., Mi Wuk Village, CA

South Paw Enterprises LLC, Phoenix, AZ

South Eastern Machining, Inc., Piedmont, SC

South Bend Form Tool Company, South Bend, IN

Southampton Manufacturing, Inc., Feasterville, PA

Southeastern Technology, Inc., Murfreesboro, TN

Southern Mfg. Technologies Inc., Tampa, FL

Southwest Mold, Inc., Tempe, AZ

Southwest Manufacturing, Inc., Wichita, KS

Space City Machine Tool Co., Houston, TX

Spalding Day Tool Die Co., Louisville, KY

Spark Technologies, Inc., Schenley, PA

Spartak Products Inc., Houston, TX

Specialty Machine Hydraulics, Pleasantville, PA

Speed Precision Machining, Phoenix, AZ

Spenco Machine Manufacturing, Temecula, CA

Spex Precision Machine Technologies, Rochester, NY

Spike Industries, North Lima, OH

Spin Pro Inc., Sunnyvale, CA

Spiral Grinding Company, Culver City, CA

Springfield Manufacturing, LLC, Clover, SC

Springfield Tool Die, Inc., Greenville, SC

Sprint Tool Die Inc., Meadville, PA

Spun Metals, Inc., Phoenix, AZ

STADCO, Los Angeles, CA

Standard Die Supply of Indiana, Inc., Indianapolis, IN

Standard Welding Steel, Products, Inc., Medina, OH

Standard Machine Inc., Cleveland, OH

Standard Jig Boring Service, Inc., Akron, OH

Stanek Tool Corporation, New Berlin, WI

Stanley Machining Tool Corp., Carpentersville, IL

Star Tool Engineering, Inc., Newark, CA

Star Tool Die, Inc., Elkhart, IN

Star Precision Products, Willoughby, OH

Starn Tool Manufacturing Co., Meadville, PA

State Industrial Products, Inc., Phoenix, AZ

Stauble Machine Tool Company, Louisville, KY

Stedcraft Inc., Torrington, CT

Stelted Manufacturing, Inc., Tempe, AZ

Sterling Engineering Corporation, Winsted, CT

Sterling Tool Company, Racine, WI

Stevens Manufacturing Co., Inc., Milford, CT

Stewart Manufacturing Company, Phoenix, AZ

Stieg Grinding Corporation, Rockford, IL

Stillion Industries, Ann Arbor, MI

Stillwater Technologies, Inc., Troy, OH

Stines' Machine, Inc., Vista, CA

STM Manufacturing, Holland, MI

Stonewall Jackson Mold Inc., Annville, KY

Stoney Crest Regrind Service, Inc., Bridgeport, MI

Streamline Tooling Systems, Muskegon, MI

Strobel Machine, Inc., Worthington, PA

Stuart Tool Die, Falconer, NY

Studwell Engineering, Inc., Sun Valley, CA

Subsea Ventures Inc., Houston, TX

Suburban Manufacturing Company, Eastlake, OH

Summit Precision, Inc., Phoenix, AZ

Summit Machine Company, Scottdale, PA

Sun Tool Company, Houston, TX

Sun EDM Inc., Gilbert, AZ

Sunbelt Plastics, Inc., Frisco, TX

Sunrise Tool Die, Inc., Henderson, KY

Sunset Tool Inc., Saint Joseph, MI

Super Finishers II, Phoenix, AZ

Superbolt, Inc., Carnegie, PA

Superior Jig, Inc., Anaheim, CA

Superior Mold Company, Ontario, CA

Superior Gear Box Company, Stockton, MO

Superior Die Tool Machine Co., Columbus, OH

Superior Tool, Inc., Willow Street, PA

Superior Tool Die Company, Inc., Elkhart, IN

Superior Tool Die Company, Bensalem, PA

Superior Thread Rolling Company Inc, Arleta, CA

Superior Programming LLC, Clearwater, KS

Superior Die Set Corporation, Oak Creek, WI

Supreme Tool Die Company, Fenton, MO

Surface Manufacturing, Auburn, CA

Swiss Wire E D M, Costa Mesa, CA

Swissco, Inc., Bell Gardens, CA

Swisstech Tooling Manufacturing, Inc., Scottsdale, AZ

Synergis Technologies Group, Grand Rapids, MI

Synergy Machine, Inc., Kent, WA

Synertron, Inc., Middleboro, MA

Syst-A-Matic Tool Design, Meadville, PA

Systems 3, Inc., Tempe, AZ

T S Industrial Machining Corp., Woburn, MA

T-M Manufacturing Corporation, Sunnyvale, CA

T J Tool and Mold, Guys Mills, PA

T M Machine Tool, Inc., Toledo, OH

T M S Inc., Technical Machining Services, Inc., Lincoln, RI

T R Jones Machine Company, Inc., Crystal Lake, IL

T-K Associates, Inc., La Porte, IN

T. J. Karg Company, Inc., Akron, OH

TAE Corporation, d/b/a T E Manufacturing, Kent, WA

Tag Engineering, Inc., Tucson, AZ

Tait Design Machine Company Inc., Manheim, PA

Talbar, Inc., Meadville, PA

Talcott Machine Products, Inc., Meriden, CT

Talent Tool Die, Inc., Berea, OH

Tana Corporation, Toledo, OH

Tanner Oil Tools Inc., Houston, TX

Target Precision, Meadville, PA

Taurus Tool Engineering, Inc., Muncie, IN

TCI Precision Metals, Gardena, CA

TCI Aluminum North, Hayward, CA

Team Tooling and Design, Incorporated, Shawnee, OK

Tech-Machine, Inc., Colorado Springs, CO

Tech-Etch, Inc., Plymouth, MA

Tech Tool, Inc., Detroit, MI

Tech Tool Mold, Inc., Meadville, PA

Tech Ridge, Inc., South Chelmsford, MA

Tech Mold, Inc., Tempe, AZ

Tech Industries, Inc., Cleveland, OH

Tech Manufacturing Company, Wright City, MO

Techmetals, Inc., Dayton, OH

Techni-Products, Inc., East Longmeadow, MA

Techni-Cast Corporation, South Gate, CA

Technics 2000 Inc., Olathe, KS

Technodic, Inc., Providence, RI

Tecno Troqueles Industries, Laredo, TX

TecoMetrix, LLC, Tempe, AZ

Tedco, Inc., Cranston, RI

Teke Machine Corp., Rochester, NY

Tell Tool, Inc., Westfield, MA

Temco Corporation, Danvers, MA

Tenk Machine Tool Company, Cleveland, OH

Tennessee Metal Works, Inc., Nashville, TN

Tennessee Tool Corporation, Charlotte, TN

Terrell Manufacturing Inc., Strongsville, OH

Testand Corporation, Pawtucket, RI

Tetco, Inc., Plainville, CT

Teter Tool Die, Inc., La Porte, IN

Texas Honing, Inc., Pearland, TX

Thaler Machine Company, Dayton, OH

The POM Group, Inc., Auburn Hills, MI

The Ryan Group, Franklin, NJ

The Will-Burt Company, Orrville, OH

The Metalworking Group, Inc., Cincinnati, OH

The United Plastics Group, Inc., Chicopee, MA

The Timken Company, Specialty Tooling Rebuilding, Canton, OH

The Sullivan Corporation, Hartland, WI

The Foster Group, Rochester, NY

The Sherman Corporation, Inglewood, CA

The Goforth Corp., dba The Machine Shop, Fremont, CA

The Baughman Group, Louisville, KY

The Bechdon Company, Inc., Upper Marlboro, MD

The Budd Company, Shelbyville, KY

The Die Works Inc., Hillsboro, MO

Therm, Inc., Ithaca, NY

Thiel Tool Engineering Co., Inc., St. Louis, MO

Thomas Machine Works, Inc., Newburyport, MA

Thornhurst Manufacturing, Inc., Zephyrhills, FL

Three-Way Pattern, Inc., Wichita, KS

ThreeCore, Inc., Danvers, MA

Time Machine Stamping, Inc., Phoenix, AZ

Timon Tool Die Co., Toledo, OH

Tipco Punch, Inc., Hamilton, OHStart Printed Page 11994

Tipp Machine Tool, Inc., Tipp City, OH

Titan, Inc., Sturtevant, WI

TLT-Babcock, Inc., Medina Ohio Facility, Akron, OH

TMI Industries, Inc., Temperance, MI

TMK Manufacturing Inc., Campbell, CA

TMX Engineering Manufacturing, Santa Ana, CA

Toledo Blank, Inc., Toledo, OH

Toledo Molding Die, Toledo, OH

Tolerance Masters, Inc., Circle Pines, MN

Tomak Precision, Lebanon, OH

Tomco Tool Die, Inc., Belding, MI

TomKen Tool Engineering, Inc., Muncie, IN

Tool-Matic Company, Inc., City Of Commerce, CA

Tool Technology, Inc., Danvers, MA

Tool Gauge Machine Works, Inc., Tacoma, WA

Tool Mate Corporation, Cincinnati, OH

Tool Specialties Company, Hazelwood, MO

Tool Specialty Company, Los Angeles, CA

Tool Steel Service of California, Inc., Los Angeles, CA

Tool Tech Corporation, San Jose, CA

Tool Tech, Inc., Springfield, OH

Toolcomp Tooling Components, Co., Toledo, OH

Toolcraft Products, Inc., Dayton, OH

Toolcraft of Phoenix, Inc., Glendale, AZ

Toolex, Inc., Houston, TX

Tooling Molds West, Inc., Tempe, AZ

Tools, Inc., Sussex, WI

Tools Renewal Company, Birmingham, AL

Top Tool Company, Minneapolis, MN

Top Tool Die, Inc., Cleveland, OH

Toth Technologies, Pennsauken, NJ

Toth Industries, Inc., Toledo, OH

Tower Tool Engineering, Inc., Machesney Park, IL

Trace-A-Matic Corporation, Brookfield, WI

Tracer Tool Die Company Inc., Grand Rapids, MI

Trademark Die Engineering, Belmont, MI

Tram Tek Inc., Phoenix, AZ

Tran Engineering, Garden Grove, CA

Trans-World Electric Inc., Port Arthur, TX

Transmatic Manufacturing, Tempe, AZ

Treblig, Inc., Greenville, SC

Trec Industries, Inc., Brooklyn Heights, OH

Tree City Mold Machine Co., Inc., Kent, OH

Treffers Precision, Inc., Phoenix, AZ

Tresco Tool, Inc., Guys Mills, PA

Tri-M-Mold, Inc., Stevensville, MI

Tri Craft, Inc., Middleberg Heigh, OH

Tri J Machine Company, Inc., Gardena, CA

Tri-City Machine Products, Inc., Peoria, IL

Tri-City Tool Die, Inc., Bay City, MI

Triad Plastic Technologies, Reno, NV

Triangle Tool Company, Erie, PA

Triangle Mold Machine Co. Inc., Hartville, OH

Tribond Industries, Inc., Phoenix, AZ

Tricon Machine Tool, Inc., Rochester, NY

Tricore Mold Die, Machesney Park, IL

Tridecs Corporation, Hayward, CA

Trident Precision Manufacturing, Webster, NY

Trimac Manufacturing, Inc., Santa Clara, CA

Trimble Navigation Ltd. Engineering Construction Division, Huber Heights, OH

Trimline Tool, Inc., Grandville, MI

Trinity Tools, Inc., North Tonawanda, NY

Trio Tool Die, Inc., Hawthorne, CA

Triple-T Cutting Tools Inc., West Berlin, NJ

Triple Quality Tool Die, Inc., Bell, CA

Triplett Machine, Inc., Phelps, NY

Triumph Precision, Inc., Phoenix, AZ

Trojan Mfg. Co. Inc., Piqua, OH

Trotwood Corporation, Trotwood, OH

Tru Form Manufacturing Corp., Rochester, NY

Tru Tool, Inc., Sturtevant, WI

Tru-Cut, Inc., Sebring, OH

Tru-Stop, Inc., Prescott Valley, AZ

True Cut EDM Inc., Garland, TX

True Position, Inc., Chatsworth, CA

True-Tech Corporation, Fremont, CA

Trueline Tool Machine, Inc., Springfield, OH

Trust Technologies, Willoughby, OH

Trutron Corporation, Troy, MI

Tschida Engineering, Inc., Napa, CA

Tucker Engineering Inc., Peabody, MA

Tucker Machine Company, North Branford, CT

Turn-Tech, Inc., Pinehurst, TX

Turnkey Automation, Inc., Rockford, IL

Twin City Plating Company, Minneapolis, MN

Two-M Precision Co., Inc., Willoughby, OH

Tymar Precision Inc., Santa Clara, CA

U S Machine Tool, Inc., Murfreesboro, TN

U M C, Inc., Hamel, MN

U C O Tool Die, Inc., Union City, OH

U F E Incorporated, Stillwater, MN

UAB Manufacturing Co., Inc., Southampton, PA

Uddeholm, Santa Fe Springs, CA

Ugm, Inc., Santa Clara, CA

Ultima Nashua Industrial Corp., Nashua, NH

Ultra-Tech, Inc., Kansas City, KS

Ultra Tool Company, Grantsburg, WI

Ultra Tool Manufacturing, Inc., Menomonee Falls, WI

Ultra Precision, Inc., Freeport, PA

Ultra Stamping Assembly, Inc., Rockford, IL

Ultramation, Inc., Waco, TX

Ultron, Long Beach, CA

Uneco Manufacturing, Inc., Chicopee, MA

Unique Tool Manufacturing, Randleman, NC

Unique Machine Company, Montgomeryville, PA

Unitech, Inc., Kansas City, MO

United States Fittings, Inc., Warrensville Hei, OH

United Tool Engineering Co., South Beloit, IL

United Tool Engineering, Inc., Mishawaka, IN

United Machine Co., Inc., Wichita, KS

United Centerless Grinding, East Hartford, CT

Universal Tools Manufacturing Co., Springfield, NJ

Universal Precision Products Inc., Akron, OH

Universal Custom Process, Inc., Streetsboro, OH

Universal Brixius, Milwaukee, WI

Upland Fab, Inc., Ontario, CA

USAeroteam, Dayton, OH

USBX, Inc., Santa Monica, CA

UT Technologies, Inc., Los Angeles, CA

V R C, Inc., Berea, OH

V S Die Mold, Inc., Lakewood, OH

V I Mfg., Webster, NY

V Ash Machine Company, Cleveland, OH

V A Machine Tools, Inc., Broussard, LA

V M Tool Company, Inc., Perkasie, PA

V.A.W. of America, Inc., Phoenix, AZ

Val-Tech Mfg., Tempe, AZ

Valley Tool Mfg., Inc., Orange, CT

Valley Tool Room, Inc., Phoenix, AZ

Valley Tool Die, Inc., North Royalton, OH

Valley Machine Works, Inc., Phoenix, AZ

Valv-Trol Company, Stow, OH

Van-Am Tool Engineering, Inc., St. Joseph, MO

Van Reenen Tool Die Inc., Rochester, NY

Van Engineering, R Vandewalle, Inc., Cincinnati, OH

Van Os Machine Works, Inc., St. Louis, MO

Vanderveer Industrial Plastics, Inc., Placentia, CA

Vanpro, Inc., Cambridge, MN

Varco Systems, Orange, CA

Vaughn Manufacturing Company, Inc., Nashville, TN

Vektek, Inc., Emporia, KS

Venango Machine Products, Inc., Reno, PA

Ver-Sa-Til Associates, Inc., Chanhassen, MN

Versacut Ind. Inc., Morenci, MI

VersaTool Die Machining and Engineering Inc., Beloit, WI

Vi-Tec Manufacturing Inc., Livermore, CA

Vico Louisville, Louisville, KY

Viking Tool Engineering, Whitehall, MI

Viking Tool Gage, Inc., Conneaut Lake, PA

Virtual Fund, Inc., Eden Prairie, MN, Auburn, WA

Vistek Precision Machine Company, Ivyland, PA

Vitron Manufacturing, Inc., Phoenix, AZ

Vitullo Associates, Inc., Warren, MI

Vobeda Machine Tool Company, Racine, WI

Vulcan Tool Corporation, Dayton, OH

W + D Machinery Company, Inc., Overland Park, KS

W H Stampings Fineblanking, Inc., Hauppauge, NY

W D J Machine Engineering Inc., Fullerton, CA

W E C Technologies Corporation, Amityville, NY

W G Strohwig Tool Die, Inc., Richfield, WI

W W G, Inc., Indianapolis, IN

W. C. Kirby Son, Inc., Noblesville, IN

W.A.C. Consulting/Coss Systems Inc., Northboro, MA

WADKO Precision, Inc., Houston, TX

Wagner Engraving Co., Kirkwood, MO

Wagner Engineering, Inc., Gilbert, AZ

Waiteco Machine, Acton, MA

Wajo Tool and Die, Inc., East Hampstead, NH

Walker Tool Machine Company, Perrysburg, OH

Walker Corporation, Ontario, CA

Wallner Tooling/Expac, Inc., Rancho Cucamonga, CA

Waltco Engineering, Inc., Gardena, CA

Walter Waukesha, Inc., Waukesha, WI

Walter Tool Mfg. Inc., Elgin, IL

Walz Krenzer, Inc., Oxford, CT

Warmelin Precision Products, Hawthorne, CA

Waukesha Tool Stamping Inc., Sussex, WI

Wayne Manufacturing, Inc., Boulder, CO

Webco Machine Products, Inc., Valley View, OH

Weco Metal Products, Ontario, NY

Wejco Instruments Inc., Houston, TX

Wemco Precision Tool, Inc., Meadville, PA

Wentworth Company, Glastonbury, CTStart Printed Page 11995

Werkema Machine Company, Inc., Grand Rapids, MI

Wes Products, Madison Heights, MI

West Valley Precision Inc., San Jose, CA

West Valley Milling, Inc., Chatsworth, CA

West Tool Manufacturing, Inc., Cleveland, OH

West Pharmaceutical Services, Erie, PA

Western Tap Manufacturing Co., Inc., Buena Park, CA

Western Air Products, Tucson, AZ

Western Mass. MechTech, Inc., Ware, MA

Westfield Tool Die, Inc., Westfield, MA

Westfield Manufacturing Corp., Westfield, IN

Westlake Tool Die Mfg., Avon, OH

Westool Corporation, Temperance, MI

Westtool Inc., Phoenix, AZ

WGI Inc., Southwick, MA

Whatever Manufacturing, Santa Ana, CA

White Machine, Inc., North Royalton, OH

Whitehead Tool Design, Inc., Guys Mills, PA

Wiegel Tool Works, Inc., Wood Dale, IL

Wiesen EDM, Inc., Belding, MI

Wightman Engineering Services, Inc., Santa Clara, CA

Wilco Die Tool Machine Company, Maryland Heights, MO

Wilkinson Mfg., Inc., Santa Clara, CA

Willer Tool Corporation, Jackson, WI

William Sopko Sons Co., Inc., Cleveland, OH

Williams Machine, Inc., Lake Elsinore, CA

Williams Engineering Manufacturing, Inc., Chatsworth, CA

Williams Tooling Inc., Dorr, MI

Windsor Tool Die, Inc., Cleveland, OH

Wintech Industries Inc., Tempe, AZ

Winter's Grinding Service, Menomonee Falls, WI

Wire Tech E D M, Inc., Los Alamitos, CA

Wire Cut Company, Inc., Buena Park, CA

Wirecut Technologies Inc., Indianapolis, IN

WireCut E D M, Inc., Dallas, TX

Wiretec, Inc., Delmont, PA

Wisconsin Engraving Company/, Unitex, New Berlin, WI

Wisconsin Mold Builders, LLC, Waukesha, WI

Wise Machine Co., Inc., Butler, PA

Wolverine Tool Company, St. Clair Shores, MI

Wolverine Bronze Company, Roseville, MI

Wolverine Tool Engineering, Belmont, MI

Woodruff Corporation, Torrance, CA

Wright-K Technology, Inc., Saginaw, MI

Wright Brothers Welding Sheet Metal, Inc., Hollister, CA

Wright Industries, Inc., Gilbert, AZ

WSI Industries, Inc., Wayzata, MN

X-L Machine Company, Inc., Three Rivers, MI

XLI Corporation, Rochester, NY

Yarde Metals, Inc., Bristol, CT

Yates Tool, Inc., Medina, OH

Yoder Die Casting Corporation, Dayton, OH

Youngberg Industries, Inc., Belvidere, IL

Youngers and Sons Manufacturing Company, Inc., Viola, KS

Youngstown Plastic Tooling Machinery, Inc., Youngstown, OH

Z Z Machine Products Inc., Racine, WI

Z M D Mold Die Inc., Mentor, OH

Zip Tool Die Co., Inc., Cleveland, OH

Zip Products Inc., Rochester, NY

Zircon Precision Products, Inc., Tempe, AZ

Zuelzke Tool Engineering, Milwaukee, WI

End Supplemental Information

[FR Doc. 02-6346 Filed 3-15-02; 8:45 am]