Skip to Content


Standards of Performance for New Stationary Sources; Monitoring Requirements

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

CFR Correction

In Title 40 of the Code of Federal Regulations, Part 60 (60.1 to End), revised as of July 1, 2001, on page 53, in § 60.13, paragraph (d)(1) is corrected by revising the last two sentences to read as follows:

Monitoring requirements.
* * * * *

(d)(1) * * * For a COMS, the optical surfaces, exposed to the effluent gases, must be cleaned before performing the zero and upscale drift adjustments, except for systems using automatic zero adjustments. The optical surfaces must be cleaned when the cumulative automatic zero compensation exceeds 4 percent opacity.

* * * * *
End Preamble

[FR Doc. 02-55516 Filed 6-27-02; 8:45 am]