Environmental Protection Agency (EPA).
Direct final rule.
EPA is announcing it is approving a revision to the Missouri State Implementation Plan (SIP) which pertains to the control of emissions from surface coating operations in the Kansas City, Missouri, area. This revision clarifies an inconsistency between the SIP approved version of the rule and the state adopted version. Approval of this revision will ensure consistency Start Printed Page 14538between the state and federally-approved rules, and ensure Federal enforceability of the current state rule.
This direct final rule will be effective May 27, 2003, unless EPA receives adverse comments by April 25, 2003. If adverse comments are received, EPA will publish a timely withdrawal of the direct final rule in the Federal Register informing the public that the rule will not take effect.
Comments may be mailed to Wayne Kaiser, Environmental Protection Agency, Air Planning and Development Branch, 901 North 5th Street, Kansas City, Kansas 66101.
Copies of documents relative to this action are available for public inspection during normal business hours at the above-listed Region 7 location. The interested persons wanting to examine these documents should make an appointment with the office at least 24 hours in advance.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Wayne Kaiser at (913) 551-7603.End Further Info End Preamble Start Supplemental Information
Throughout this document whenever “we,” “us,” or “our” is used, we mean EPA. This section provides additional information by addressing the following questions:
What is a SIP?
What is the Federal approval process for a SIP?
What does Federal approval of a state regulation mean to me?
What is being addressed in this document?
Have the requirements for approval of a SIP revision been met?
What action is EPA taking?
What Is a SIP?
Section 110 of the Clean Air Act (CAA) requires states to develop air pollution regulations and control strategies to ensure that state air quality meets the national ambient air quality standards established by EPA. These ambient standards are established under section 109 of the CAA, and they currently address six criteria pollutants. These pollutants are: carbon monoxide, nitrogen dioxide, ozone, lead, particulate matter, and sulfur dioxide.
Each state must submit these regulations and control strategies to us for approval and incorporation into the Federally-enforceable SIP.
Each Federally-approved SIP protects air quality primarily by addressing air pollution at its point of origin. These SIPs can be extensive, containing state regulations or other enforceable documents and supporting information such as emission inventories, monitoring networks, and modeling demonstrations.
What Is the Federal Approval Process for a SIP?
In order for state regulations to be incorporated into the federally-enforceable SIP, states must formally adopt the regulations and control strategies consistent with state and Federal requirements. This process generally includes a public notice, public hearing, public comment period, and a formal adoption by a state-authorized rulemaking body.
Once a state rule, regulation, or control strategy is adopted, the state submits it to us for inclusion into the SIP. We must provide public notice and seek additional public comment regarding the proposed Federal action on the state submission. If adverse comments are received, they must be addressed prior to any final Federal action by us.
All state regulations and supporting information approved by EPA under section 110 of the CAA are incorporated into the Federally-approved SIP. Records of such SIP actions are maintained in the Code of Federal Regulations (CFR) at Title 40, Part 52, entitled “Approval and Promulgation of Implementation Plans.” The actual state regulations which are approved are not reproduced in their entirety in the CFR outright but are “incorporated by reference,” which means that we have approved a given state regulation with a specific effective date.
What Does Federal Approval of a State Regulation Mean to Me?
Enforcement of the state regulation before and after it is incorporated into the Federally-approved SIP is primarily a state responsibility. However, after the regulation is Federally approved, we are authorized to take enforcement action against violators. Citizens are also offered legal recourse to address violations as described in section 304 of the CAA.
What Is Being Addressed in This Document?
Missouri rule 10 CSR 10-2.300 relates to the control of emissions from manufacture of surface coating products. The current SIP approved version of this rule, as noted in 40 CFR 52.1320(c), Chapter 2, states that section (1)(A) of this rule is not SIP approved. In the state version of the rule, section (1)(A) identifies the area of applicability. It reads, “This regulation shall apply throughout Clay, Jackson and Platte Counties.”
A review of the historical record shows that this section was added to the rule by the state and became effective on August 27, 1987. This rule was meant to apply to the then-existing Kansas City ozone non-attainment area, and the addition of this section makes that clarification.
The state subsequently revised the rule again and this action became effective on December 2, 1987. This version of the rule was submitted to us for approval, and we approved it into the SIP on August 24, 1994 (59 FR 43480). However, the relevant section of the CFR was not revised to reflect that section (1)(A) has been SIP approved. On January 23, 2003, Missouri submitted a request to EPA to correct this error. The purpose of this action is to make the correction to 40 CFR 52.1320(c), to delete the note indicating that section (1)(A) has not been approved.
The state submittal has met the public notice requirements for SIP submissions in accordance with 40 CFR 51.102. The submittal also satisfied the completeness criteria of 40 CFR part 51, appendix V. In addition, as explained above and in more detail in the technical support document which is part of this document, the revision meets the substantive SIP requirements of the CAA, including section 110 and implementing regulations.
What Action Is EPA Taking?
We are approving as an amendment to the Missouri SIP a revision to rule 10 CSR 10-2.300, Control of Emissions from the Manufacturing of Paints, Varnishes, Lacquers, Enamels and Other Allied Surface Coating Products, which was state effective November 29, 1991.
We are processing this action as a final action because the revisions make routine changes to the existing rules which are noncontroversial. Therefore, we do not anticipate any adverse comments. Please note that if EPA receives adverse comment on part of this rule and if that part can be severed from the remainder of the rule, EPA may adopt as final those parts of the rule that are not the subject of an adverse comment.
Statutory and Executive Order Reviews
Under Executive Order 12866 (58 FR 51735, October 4, 1993), this action is not a “significant regulatory action” and therefore is not subject to review by the Office of Management and Budget. For this reason, this action is also not subject to Executive Order 13211, “Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use” (66 FR 28355, May 22, 2001). This action merely approves state law as meeting Federal requirements and imposes no additional Start Printed Page 14539requirements beyond those imposed by state law. Accordingly, the Administrator certifies that this rule will not have a significant economic impact on a substantial number of small entities under the Regulatory Flexibility Act (5 U.S.C. 601 et seq.). Because this rule approves pre-existing requirements under state law and does not impose any additional enforceable duty beyond that required by state law, it does not contain any unfunded mandate or significantly or uniquely affect small governments, as described in the Unfunded Mandates Reform Act of 1995 (Public Law 104-4).
This rule also does not have tribal implications because it will not have a substantial direct effect on one or more Indian tribes, on the relationship between the Federal Government and Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes, as specified by Executive Order 13175 (65 FR 67249, November 9, 2000). This action also does not have Federalism implications because it does not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132 (64 FR 43255, August 10, 1999). This action merely approves a state rule implementing a Federal standard, and does not alter the relationship or the distribution of power and responsibilities established in the CAA. This rule also is not subject to Executive Order 13045, “Protection of Children from Environmental Health Risks and Safety Risks” (62 FR 19885, April 23, 1997), because it is not economically significant.
In reviewing SIP submissions, EPA's role is to approve state choices, provided that they meet the criteria of the CAA. In this context, in the absence of a prior existing requirement for the State to use voluntary consensus standards (VCS), EPA has no authority to disapprove a SIP submission for failure to use VCS. It would thus be inconsistent with applicable law for EPA, when it reviews a SIP submission, to use VCS in place of a SIP submission that otherwise satisfies the provisions of the CAA. Thus, the requirements of section 12(d) of the National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) do not apply. This rule does not impose an information collection burden under the provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.).
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the Small Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and to the Comptroller General of the United States. EPA will submit a report containing this rule and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the Federal Register. A major rule cannot take effect until 60 days after it is published in the Federal Register. This action is not a “major rule” as defined by 5 U.S.C. 804(2).
Under section 307(b)(1) of the CAA, petitions for judicial review of this action must be filed in the United States Court of Appeals for the appropriate circuit by May 27, 2003. Filing a petition for reconsideration by the Administrator of this final rule does not affect the finality of this rule for the purposes of judicial review nor does it extend the time within which a petition for judicial review may be filed, and shall not postpone the effectiveness of such rule or action. This action may not be challenged later in proceedings to enforce its requirements. (See section 307(b)(2).)Start List of Subjects
List of Subjects 40 CFR Part 52
- Environmental protection
- Air pollution control
- Carbon monoxide
- Incorporation by reference
- Intergovernmental relations
- Nitrogen dioxide
- Particulate matter
- Reporting and recordkeeping requirements
- Sulfur oxides
- Volatile organic compounds
Dated: March 13, 2003.
Acting Regional Administrator, Region 7.
Chapter I, title 40 of the Code of Federal Regulations is amended as follows:End Amendment Part Start Part
1. The authority citation for part 52 continues to read as follows:End Part
2. In § 52.1320(c) the table for Chapter 2 is amended by revising the entry for 10-2.300 to read as follows:
(c) * * *
|Missouri citation||Title||State effective date||EPA approval date||Explanation|
|Missouri Department of Natural Resources|
|Chapter 2—Air Quality Standards and Air Pollution Control Regulations for the Kansas City Metropolitan Area|
|* * * * * * *|
|10-2.300||Control of Emissions from the Manufacturing of Paints, Varnishes, Lacquers, Enamels and Other Allied Surface Coating Products||11/29/91||3/26/03 and FR page citation||4/3/95, 60 FR 16806 (correction).|
|* * * * * * *|
[FR Doc. 03-7053 Filed 3-25-03; 8:45 am]
BILLING CODE 6560-50-P