Skip to Content

Rule

Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Models BR700-710A1-10 and BR700-710A2-20 Turbofan Engines; Correction

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Aviation Administration, DOT.

Start Printed Page 19945

ACTION:

Final rule; request for comments, correction.

SUMMARY:

This document makes corrections to Airworthiness Directive (AD) 2003-07-11, applicable to Rolls-Royce Deutschland Ltd & Co KG (formerly Rolls-Royce Deutschland GmbH, formerly BMW Rolls-Royce GmbH), models BR700-710A1-10 and BR700-710A2-20 turbofan engines. AD 2003-07-11 was published in the Federal Register on April 11, 2003 (68 FR 17727). In the compliance section, paragraph (g) incorrectly references cycles and should reference hours, and the paragraph lettering sequence after paragraph (g) is incorrect. This document corrects cycles to hours and corrects the paragraph lettering sequence. In all other respects, the original document remains the same.

EFFECTIVE DATE:

April 28, 2003.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

James Lawrence, Aerospace Engineer, Engine Certification Office, FAA, Engine and Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803-5299; telephone (781) 238-7176; fax (781) 238-7199.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

A final rule; request for comments airworthiness directive FR DOC 03-8327, applicable to Rolls-Royce Deutschland Ltd & Co KG models BR700-710A1-10 and BR700-710A2-20 turbofan engines, was published in the Federal Register on April 11, 2003 (68 FR 17727). The following correction is needed:

On page 17729, in the second column, under Repetitive Inspections heading, paragraph (g), third line, which reads “accumulating 500 cycles-since-the-last visual and ultrasonic inspections” is corrected to read “accumulating 500 hours-since-the-last visual and ultrasonic inspections”. Also, on page 17729, in the second column, under Inspection Reporting Requirements heading, paragraph letter “(g)” is corrected to read “(h)”, under Alternative Methods of Compliance heading, paragraph letter “(h)” is corrected to read “(i)”, under Special Flight Permits heading, paragraph “(i)” is corrected to read “(j)”, under Documents That Have Been Incorporated by Reference heading, paragraph “(j)” is corrected to read “(k)”, and in the third column, under Effective Date heading, paragraph “(k)” is corrected to read “(l)”.

Start Signature

Issued in Burlington, MA, on April 17, 2003.

Francis A. Favara,

Acting Manager, Engine and Propeller Directorate, Aircraft Certification Service.

End Signature End Supplemental Information

[FR Doc. 03-9982 Filed 4-22-03; 8:45 am]

BILLING CODE 4910-13-P