Skip to Content

Notice

Certain New Chemicals; Receipt and Status Information

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 3, 2003 to July 11, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2003-0037 and the specific PMN number or TME number, must be received on or before September 5, 2003.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Acting Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of This Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2003-0037. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Start Printed Page 46624 Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2003-0037. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2003-0037 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2003-0037 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI To the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT. Start Printed Page 46625

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking This Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 3, 2003 to July 11, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 104 Premanufacture Notices Received From: 06/03/03 to 07/11/03

Case No.Received DateProjected Notice End DateManufacturer/ImporterUseChemical
P-03-058806/03/0308/31/03CBI(G) Polymeric admixture for cements(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium sodium salt
P-03-058906/03/0308/31/03The Dow Chemical Company(G) Prepolymer for isocyanate polyurethane(G) Polyurethane prepolymer
P-03-059006/03/0308/31/03PFW Aroma Chemicals - Sales Office USA(S) Fragrance oil in detergent, fabric softener and household cleaners; fragrance oil in soaps, hair care, bath and shower and personal care; fragrance oil in fine perfumes; fragrance oil in air fresheners, candles, potpourri(S) 1-hexanol, 3-mercapto-
P-03-059106/03/0308/31/03The Dow Chemical Company(G) Prepolymer for isocyanate polyurethane(G) Water dispersable polyurethane polymer
P-03-059306/03/0308/31/03CBI(G) Chemical intermediate(G) Alkoxylated acetal-derivative
P-03-059406/03/0308/31/03CBI(G) Chemical intermediate(G) Alkoxylated acetal-derivative
P-03-059506/05/0309/02/03CBI(S) Polymerization catalyst(G) Trialkylaluminum metal halide alkoxide reaction product
P-03-059606/05/0309/02/03CBI(S) Aromatic acid salt used as a component in electronic polishing products(G) Aromatic acid salt
P-03-059706/05/0309/02/03CBI(G) Reaction intermediate/raw material(S) Fatty acids, rape-oil, me esters
P-03-059806/05/0309/02/03CBI(G) Lubricant additive(G) Sulfurized vegetable oil
P-03-059906/05/0309/02/03CBI(G) Lubricant additive(G) Sulfurized vegetable oil
P-03-060006/05/0309/02/03CBI(G) Lubricant additive(G) Sulfurized vegetable oil
P-03-060106/05/0309/02/03CBI(G) Lubricant additive(G) Sulfurized vegetable oil
P-03-060206/05/0309/02/03CBI(G) Lubricant additive(G) Sulfurized vegetable oil
P-03-060306/05/0309/02/03CBI(G) Lubricant additive(G) Sulfurized vegetable oil
P-03-060406/06/0309/03/033M Company(S) Monomer(G) Fluorinated methacrylated monomer
P-03-060506/06/0309/03/03Johnson Polymer(G) Polymeric coating vehicle(G) Styrene acrylic copolymer
P-03-060606/06/0309/03/03Johnson Polymer(G) Polymeric coating vehicle(G) Styrene acrylic copolymer
P-03-060706/03/0308/31/03CBI(G) Photographic Chemical(G) Disubstituted aniline
Start Printed Page 46626
P-03-060806/09/0309/06/03Lonza Inc.(S) Polymer additive/adjuvant for: -polymer extrusion; -polymer film formation; antistatic agent for : -polymer films(G) N,N-alkanebis-N-fatty acid amide
P-03-060906/09/0309/06/03BASF Corporation(S) Auxiliary for dyeing leather(G) Oligomer of aromatic, alkyl amines and alkyl epoxide
P-03-061006/03/0308/31/03CBI(G) Raw material(G) Fatty acid ester
P-03-061106/03/0308/31/03CBI(G) Raw material(G) Fatty acid ester
P-03-061206/10/0309/07/03BASF Corporation(S) Scale inhibitor in desalination of seawater(G) Maleic acid copolymer, sodium salt
P-03-061306/10/0309/07/03CBI(G) Curing catalyst(G) Modified diaryliodoniumhexafluoroantimonate
P-03-061406/10/0309/07/03CBI(G) Electronic Chemical(G) Aromatic ether
P-03-061506/10/0309/07/03The Dow Chemical Company(S) Adhesion promoter for resins used to make microelectronic parts(G) Hydrolyzed silane
P-03-061606/10/0309/07/03Bedoukian Research, Inc.(S) Chemical intermediate(G) Unsaturated alkyl grignard reagent
P-03-061706/10/0309/07/03Bedoukian Research, Inc.(S) Fragrances uses as per Federal Food, Drug and Cosmetic Act (FFDCA); flavor uses as per FFDCA; fragrances uses; scented papers, detergents, candles, etc.(S) 3-pentenoic acid, 2-methyl-, hexyl ester
P-03-061806/10/0309/07/03The Dow Chemical Company(S) Adhesion promoter for resins used to make microelectronic parts.(G) Silsesquioxane
P-03-061906/11/0309/08/03CBI(G) Fuel additive(G) Fatty acid, reaction product with alkylamino alcohol, propoxylated
P-03-062006/11/0309/08/03CBI(G) Chelating agent(G) Aminocarboxylic acid, alkaline salt
P-03-062106/11/0309/08/03CBI(G) Chelating agent(G) Aminocarboxylic acid, alkaline salt
P-03-062206/11/0309/08/03CBI(G) A component of ultraviolet coating agent(G) Substituted alkanediol diacrylate
P-03-062306/12/0309/09/03CBI(G) Non-dispersive use.(G) Amino epoxy silane
P-03-062406/12/0309/09/03Dupont Textiles and Interiors(S) Chemical intermediate(S) Dodecanedioic acid, dimethyl ester
P-03-062506/12/0309/09/03Crompton Corporation(G) Soluble oil base(G) Alkyl benzenesulfonic acid, sodium salt
P-03-062606/12/0309/09/03CBI(G) Open, non-dispersive (resin)(G) Urethane acrylate
P-03-062706/16/0309/13/03Sasol North America Inc.(S) Surfactant used in formulation of deicing fluids(S) Fatty acids, C16-18 and C18-unsaturated, esters with polyethylene glycol mono-me ether
P-03-062806/16/0309/13/03CBI(G) Raw material for manufacturing of photosensitive material(G) Pyrrolotriazole derivative
P-03-062906/16/0309/13/03CBI(G) Coatings and inks(G) Polyether polyester aminoacrylate
P-03-063006/16/0309/13/03CBI(G) Coatings and inks(G) Polyether polyester aminoacrylate
P-03-063106/16/0309/13/03CBI(G) Thermoset polymer component, open nondispersive use(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin
P-03-063206/16/0309/13/03CBI(S) Polyurethane coating(G) Aqueous polyurethane dispersion
P-03-063306/16/0309/13/03CBI(G) Raw material for manufacturing of photosensitive material(G) Alkylamide derivative
P-03-063406/16/0309/13/03CBI(G) Thermoset polymer component, open nondispersive use(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin polymer
P-03-063506/16/0309/13/03CBI(G) Thermoset polymer component, open nondispersive use(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin polymer
P-03-063606/16/0309/13/03CBI(S) Industrial ultraviolet coatings and inks(G) Epoxy acrylate oligomer
P-03-063706/16/0309/13/03CBI(G) Adhesive(G) Polysiloxane
P-03-063806/16/0309/13/03CBI(G) Water-borne coating(G) Water-borne urethane polymer
P-03-063906/16/0309/13/03CBI(G) Contained use polymer reactant(G) Quaternary ammonium salt
P-03-064006/17/0309/14/03Cytec Engineered Materials Inc. (CEM)(G) Resin for non-dispersive use(G) Epoxy-bisphenol adduct
P-03-064106/17/0309/14/03BASF Corporation(S) Nonionic surfactant for hard surface cleaners; nonionic surfactant for powder laundry detergents(S) Alcohols, C13-15-branched and linear, ethoxylated
P-03-064206/16/0309/13/03CBI(G) Starting material for the manufacture of an AgroChemical intermediate.(G) Disubstituted benzenesulfonic acid, alkali metal salt
Start Printed Page 46627
P-03-064306/16/0309/13/03CBI(G) Used as an intermediate in the synthesis of an AgroChemical product.(G) Disubstituted benzoic acid, alkali metal salt.
P-03-064406/18/0309/15/03CBI(G) Radiation curable inks, coatings and printing plates.(G) Acrylate ester
P-03-064506/18/0309/15/03Mitsubishi Gas Chemical America, Inc.(S) Water retention aid for ornamental plants(G) Polyether polyol
P-03-064606/19/0309/16/03PPG Industries, Inc.(G) Component of a coating(G) Cationic amine salt epoxy resin
P-03-064706/19/0309/16/03Reichhold, Inc.(G) Ink base(G) Amine salt of diglycidyl ether of bisphenol a, bisphenol a, fatty acids, alkeneoic acid and alkenylbenzene.
P-03-064806/19/0309/16/03Nagase America Corporation(S) Matting agent for paint/coating; light diffussing agent for film coating/plastic compounding; anti-blocking agent for film(S) 2-propenoic acid, 2-methyl-, 1,2-ethanediyl ester, polymer with butyl 2-methyl-2-propenoate
P-03-064906/19/0309/16/03CBI(G) Cleaning additive for semiconductor manufacturing(G) Acrylic acid copolymer salt; alkyl phosphonic acid salt; substituted carboxylic acid salt
P-03-065006/20/0309/17/03Harcros Chemicals Inc.(G) A catalyst for ethoxylation/propoxylation reactions(G) Organosulfate calcium hydroxy complex
P-03-065106/20/0309/17/03CBI(G) Sizing agent for glass fiber manufacture(G) Polyurethane
P-03-065206/20/0309/17/03BASF Corporation(G) Components in composite formulations(G) Polymethylenepolyphenylene isocyanate methacrylate polymer
P-03-065306/23/0309/20/03CBI(G) Polymeric admixture for cements(G) Polycarboxylate polymer with alkenylsubstituted carbomonocycle, modified with poly(oxyalkylenediyl) and polymer of heteromonocycle and alkylheteromonocycle monoalkyl ether, sodium salt
P-03-065406/20/0309/17/03CBI(S) Adhesive raw material for lamination and heat sealing(G) Polyurethane - polyester elastomer
P-03-065506/16/0309/13/03Archer Daniels Midland Company(S) Reactive coalescer in architectural paint, coatings and stain; inks; color concentrates for paint coloring(S) Fatty acids, corn-oil, esters with propylene glycol
P-03-065606/24/0309/21/03Archer Daniels Midland Company(S) Reactive coalescer in architectural paint, coatings and stain; inks; color concentrates for paint coloring(S) Fatty acids, sunflower-oil, esters with propylene glycol
P-03-065706/24/0309/21/03Cognis Corporation(G) Low foaming wetting agent(S) Oxirane, methyl-, polymer with oxirane, mono C8-10 alkyl ethers, ethers with 1,2-decanediol(1:1)
P-03-065806/24/0309/21/03Cognis Corporation(G) Low foaming wetting agent(S) Poly(oxy-1,2-ethanediyl), .alpha.-undecyl-.omega.-hydroxy-, branched and linear, ethers with 1,2-decanediol
P-03-065906/24/0309/21/03Cognis Corporation(G) Low foaming wetting agent(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono C8-10-alkyl ethers, ethers with 1,2-dodecanediol (1:1)
P-03-066006/24/0309/21/03Cognis Corporation(G) Low foaming wetting agent(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono C6-12-alkyl ethers, ethers with 1,2-decanediol (1:1)
P-03-066106/23/0309/20/03Marubeni Specialty Chemicals, Inc.(S) Manufacture of integrated circuit chips(G) Mixture of substituted thiobisphenol and alkyl oxirane and dimeric substance of reaction products of substituted thiobisphenol and alkyl oxirane.
P-03-066206/24/0309/21/03Essential Industries(S) Raw material for wood coatings(G) Aliphatic polyurethane dispersion
P-03-066306/25/0309/22/03CBI(G) A component of ultraviolet coating agent(G) Aliphatic epoxyacrylate
P-03-066406/27/0309/24/03CBI(G) Open, non-dispersive (resin)(G) Urethane acrylate resin
P-03-066507/01/0309/28/03CBI(G) An open non-dispersive use(G) Alkyd resin
P-03-066607/01/0309/28/03BASF Corporation(G) Intermediate in the production of pigments(G) Distillation residue from glycol production.
P-03-066707/01/0309/28/03CBI(G) Open, non-dispersive(G) Urea dimethoxyethanal resin
P-03-066807/02/0309/29/03CBI(G) Acrylic pressure sensitive adhesive(G) Acrylic solution polymer
Start Printed Page 46628
P-03-066907/07/0310/04/03CBI(S) Binders for fibrous materials(G) Modified acrylic acid-maleic acid copolymer
P-03-067007/07/0310/04/03CBI(G) Coatings and inks(G) Polyether polyester aminoacrylate
P-03-067107/07/0310/04/03CBI(G) Coatings and inks(G) Polyether polyester aminoacrylate
P-03-067207/07/0310/04/03Omnova Solutions, Inc.(S) Surfactant for aqueous floor polish; surfactant, flow, level, and wetting additive for aqueous coating formulations; surfactant, flow, and wetting additive for hard surface cleaners(S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,2-trifluoroethoxy)methyl]oxetane, ether with 2,2-dimethyl-1,3-propanediol (2:1), bis(hydrogen sulfate), diammonium salt
P-03-067307/07/0310/04/03Omnova solutions, Inc.(S) Surfactant for aqueous floor polish; surfactant, flow, level, and wetting additive for aqueous coating formulations; surfactant, flow, and wetting additive for hard surface cleaners(S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,3,3,3-pentafluoropropoxy)methyl]oxetane, ether with 2,2-dimethyl-1,3-propanediol (2:1), bis(hydrogen sulfate), diammonium salt
P-03-067407/08/0310/05/03Lubrizol metalworking additives(S) Lubricant, metalworking fluid(G) Polyolefin ester, amine salt
P-03-067507/08/0310/05/03Sasol North America Inc.(S) Surfactant used in formulation of deicing fluids(S) Fatty acids, C16-18 and C18-unsaturated, esters with polyethylene glycol mono-me ether
P-03-067607/10/0310/07/03CIBA Specialty Chemicals Corporation, Textile Effects(S) For oil, water, and soil repellent finish of fabrics of all fibers(G) Alkyl polyurethane polymer with substituted fluoroalkene telomer reaction products and substituted alkyl and cycloalkyl isocyanates reaction products
P-03-067707/10/0310/07/03CIBA Specialty Chemicals Corporation, Textile Effects(S) For oil, water, and soil repellant finish of fabrics of all fibers(G) Substituted alkyl acid alkyl ester polymers with substituted fluoroalkene telomer reaction products
P-03-067807/10/0310/07/03Eastman Chemical Company(G) Coating vehicle(G) Styrene-acrylic copolymer
P-03-067907/10/0310/07/03Atofina Chemicals, Inc.(S) Additive for hot melt adhesive(G) Olefin acrylate copolymer
P-03-068007/11/0310/08/03CBI(G) Raw material(G) Fatty acid ester
P-03-068107/11/0310/08/03CBI(G) Photographic Chemical(G) Disubstituted aniline
P-03-068207/11/0310/08/03CBI(G) Ultraviolet/electron beam curing agent (all categories)(G) Acid functional acrylate
P-03-068307/11/0310/08/03CBI(G) Coatings, adhesives and printing plates(G) Polybutadiene acrylate
P-03-068407/11/0310/08/03CBI(G) Coatings, adhesives and printing plates(G) Polybutadiene acrylate
P-03-068507/11/0310/08/03CBI(G) Raw material(G) Fatty acid ester
P-03-070807/11/0310/08/03The Dow Chemical Company(S) Surfactant for waterborne epoxy dispersions(G) Polyetherester monoepoxide
P-03-070907/11/0310/08/03The Dow Chemical Company(S) Surfactant for waterborne epoxy dispersions(G) Polyetherester monoepoxide
P-03-071007/11/0310/08/03The Dow Chemical Company(S) Surfactant for waterborne epoxy dispersions(G) Polyetherester monoepoxide
P-03-071107/11/0310/08/03The Dow Chemical Company(S) Surfactant for waterborne epoxy dispersions(G) Polyetherester monoepoxide
P-03-071207/11/0310/08/03The Dow Chemical Company(S) Surfactant for waterborne epoxy dispersions(G) Polyetherester monoepoxide
P-03-071307/11/0310/08/03The Dow Chemical Company(S) Surfactant for waterborne epoxy dispersions(G) Polyetherester monopoxide
P-03-073806/25/0309/22/03CBI(G) Plastic additive(G) Silicate

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:Start Printed Page 46629

II. 54 Notices of Commencement From: 06/03/03 to 07/11/03

Case No.Received DateCommencement/Import DateChemical
06/09/0306/02/03(G) Polyurethane-silicone
P-00-028107/08/0306/24/03(G) Alkarylsulfonic acid, sodium salts
P-01-024506/11/0304/25/03(G) Mixture of oxygenated hydrocarbons
P-01-057306/24/0306/12/03(G) Aromatic phenolic polymer
P-01-070806/17/0306/13/03(G) Polyalkoxylated aromatic amine
P-01-082906/10/0305/20/03(S) 17-oxabicyclo[14.1.0]heptadec-8-ene; 9,18-dioxatricyclo [15.1.0.08,10] octadecane
P-02-014106/16/0305/15/03(G) Polyalkenylbenzene sulfonate
P-02-015206/25/0305/21/03(G) N-substituted-2-methyl-2-propenamide, polymer with 2-propenamide and 2-propenoic acid, sodium salt
P-02-024606/30/0306/18/03(G) Acrylic polyol
P-02-028507/01/0306/10/03(S) Silane, trimethoxy[3-oriranylmethoxy]propyl-, reaction products with wollastonite (ca(sio3)
P-02-029907/08/0304/25/03(S) 2-propenoic acid, polymer with ethyl 2-propenoate, potassium salt
P-02-030606/05/0304/16/03(S) 1-propanone, 1-[4-[(4-benzoylphenyl)thio]phenyl]-2-methyl-2-[(4-methylphenyl)sulfonyl]-
P-02-038206/16/0305/15/03(G) Alkylbenzene sulfonate
P-02-052906/20/0305/20/03(G) Diglyceride fatty acid, acetylated
P-02-053007/02/0306/23/03(G) Alpha-amino ketone
P-02-074506/03/0305/21/03(G) Aqueous solution of iminodisuccinic acid ammonium salt
P-02-082307/08/0306/26/03(G) Tertiary amine carboxylic acid salt
P-02-082507/08/0306/26/03(G) Tertiary amine
P-02-093706/16/0306/05/03(G) Alkanone oxime
P-02-108406/06/0306/02/03(S) Siloxanes and silicones, ethoxy pr, ethoxy vinyl, ethoxy-terminated, hydrolysis products with aluminum hydroxide
P-03-000106/09/0306/02/03(G) Substituted triazine derivatives
P-03-013907/03/0306/14/03(G) Tricyclic acetal
P-03-015107/03/0306/12/03(G) Benzendisulfonic acid, substituted anthraquinone derivative, ammonium sodium salt
P-03-015406/10/0305/15/03(S) 1,2-benzenedicarboxylic acid, mixed esters with benzyl alc., cyclohexanol, 2-ethyl-1-hexanol, fumaric acid and propylene glycol
P-03-018007/01/0306/11/03(S) Cytidine, 2'-deoxy-, monohydrochloride
P-03-018307/01/0306/05/03(G) Methyl styrene acrylonitrile copolymer
P-03-018407/01/0306/05/03(G) Methyl styrene acrylonitrile copolymer
P-03-018507/01/0306/05/03(G) Butadiene styrene polymer
P-03-023506/12/0305/25/03(G) 2-propenoic acid, 2-methyl-, methyl ester, polymer with alkyl 2-methyl-2-propenoate and alkyl 2-propenoate and ethenylbenzene
P-03-024606/24/0306/18/03(S) Poly(oxy-1,2-ethanediyl), alpha-hydro-.omega.-hydroxy-, ether with 2,2'-[oxybis(methylene)]bis[2-(hydroxymethyl)-1,3-propanediol] (6:1)
P-03-024807/01/0306/19/03(G) Glycerol fatty acid ester
P-03-025107/08/0306/17/03(S) Fatty acids, C18-unsaturated, dimers, polymers with ethylenediamine, 7-oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclol[4.1.0]heptane-3-carboxylate, piperazine, polypropylene glycol diamine and sebacic acid
P-03-025306/30/0306/22/03(G) Acrylic polyol
P-03-027506/03/0305/08/03(G) Substituted hydroxyethylcellulose ethers
P-03-028607/08/0306/25/03(G) Methoxycyclodiene
P-03-029506/16/0306/11/03(G) Modified hydroxyfunctional acrylic copolymer
P-03-029706/25/0306/13/03(G) Modified polyolefin
P-03-030007/01/0306/24/03(G) Halogenated phosphate
P-03-030906/23/0305/28/03(G) Acrylate ester
P-03-031806/30/0306/10/03(G) Urethane acrylate polymer, compounds with amine
P-03-032706/23/0306/10/03(S) 1,2-cyclohexanedicarboxylic acid, dinonyl ester, branched and linear
P-03-033207/11/0306/18/03(G) Heterocyclic sulfide ester
P-03-033306/11/0305/19/03(G) Amine salt
P-03-033506/16/0306/04/03(G) Acrylate and urethane modified polyether
P-03-035907/02/0306/20/03(G) Modified epoxy acrylate
P-03-036006/11/0305/27/03(G) Polyester polyurethane dispersion
P-03-038807/03/0306/18/03(G) Fatty acid amides
P-03-039107/02/0306/23/03(G) Amine salt of polyurethane resin
P-03-039306/20/0306/16/03(G) Aliphatic polyamine
P-03-039607/03/0306/10/03(G) Metal complexes of substituted benensulfulfonic acid derivatives
P-03-040607/03/0306/11/03(G) Potassium sodium salt of substituted thiazolesulfonic acid
P-92-144906/04/0304/14/03(G) Disubstituted veeta-naphthol
P-97-010806/16/0305/29/03(S) Phenol 2,4,6-tris 3-(dimethylaminopropylaminomethyl)phenol
P-98-107707/02/0303/24/03(G) Substituted polystyrene
P-98-120807/10/0304/28/03(G) Polyalkyl-substituted-heteromonocycle
Start List of Subjects Start Printed Page 46630

List of Subjects

End List of Subjects Start Signature

Dated: July 31, 2003.

Sandra R. Wilkins,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

End Signature End Supplemental Information

[FR Doc. 03-20016 Filed 8-5-03; 8:45 am]

BILLING CODE 6560-50-S