Skip to Content

Notice

Noise Exposure Map Notice for Bolton Field Airport, Columbus, OH

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Aviation Administration, DOT.

ACTION:

Notice.

SUMMARY:

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the Columbus Port Authority for Bolton Field Airport under the provisions of 49 U.S.C. 47501 et. seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

EFFECTIVE DATE:

The effective date of the FAA's determination on the noise exposure maps is December 5, 2003.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Ernest P. Gubry, Federal Aviation Administration, Great Lakes Region, Detroit Airports District Office, DET ADO-605, 11677 South Wayne Road, Suite 107, Romulus, Michigan 48174, (734) 229-2905.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

This notice announces that the FAA finds Start Printed Page 74696that the noise exposure maps submitted for Bolton Field Airport are in compliance with applicable requirements of Part 150, effective December 5, 2003.

Under 49 U.S.C. section 47503 of the Aviation Safety and Noise Abatement Act (hereinafter referred to as “the Act”), an airport operator may submit to the FAA noise exposure maps which meet applicable regulations and which depict noncompatible land uses as of the date of submission of such maps, a description of projected aircraft operations, and the ways in which such operations will affect such maps. The Act requires such maps to be developed in consultation with interested and affected parties in the local community, government agencies, and persons using the airport.

An airport operator who has submitted noise exposure maps that are found by the FAA to be in compliance with the requirements of Federal Aviation Regulations (FAR) Part 150, promulgated pursuant to the Act, may submit a noise compatibility program for FAA approval which sets forth the measures the operator has taken or proposes for the reduction of existing noncompatible uses and for the prevention of the introduction of additional noncompatible uses.

The FAA has completed its review of the noise exposure maps and accompanying documentation submitted by the Columbus Airport Authority. The documentation that constitutes the “noise exposure maps” as defined in section 150.7 of part 150 includes: Exhibit 3 “Exhibit (2001) Noise Exposure Map” and Exhibit 6 “Future (2006) Noise Exposure Map” in the submission. The FAA has determined that these noise exposure maps and accompanying documentation for Bolton Field Airport are in compliance with applicable requirements. This determination is effective on December 5, 2003. The FAA's determination on an airport operator's noise exposure maps is limited to a finding that the maps were developed in accordance with the procedures contained in appendix A of FAR part 150. Such determination does not constitute approval of the applicant's data, information or plans, or a commitment to approve a noise compatibility program or to fund the implementation of that program.

If questions arise concerning the precise relationship of specific properties to noise exposure contours depicted on a noise exposure map submitted under section 47503 of the Act, it should be noted that the FAA is not involved in any way in determining the relative locations of specific properties with regard to the depicted noise contours, or in interpreting the noise exposure maps to resolve questions concerning, for example, which properties should be covered by the provisions of section 47506 of the Act. These functions are inseparable from the ultimate land use control and planning responsibilities of local government. These local responsibilities are not changed in any way under part 150 or through the FAA's review of noise exposure maps. Therefore, the responsibility for the detailed overlaying of noise exposure contours onto the map depicting properties on the surface rests exclusively with the airport operator, which submitted those maps, or with those public agencies and planning agencies with which consultation is required under section 47503 of the Act. The FAA has relied on the certification by the airport operator, under section 150.21 of FAR Part 150, that the statutorily required consultation has been accomplished.

Copies of the noise exposure maps and of the FAA's evaluation of the maps are available for examination at the following locations: Federal Aviation Administration, Detroit Airports District Office, 11677 South Wayne Road, Suite 107, Romulus, Michigan 48174; Bolton Field Airport, Airport Terminal Building, 2000 Norton Road, Columbus, Ohio 43228.

Questions may be directed to the individual named above under the heading, FOR FURTHER INFORMATION CONTACT.

Start Signature

Issued in Romulus, Michigan, December 5, 2003.

Winsome Lenfert,

Acting Manager, Detroit Airports District Office, FAA Great Lakes Region.

End Signature End Supplemental Information

[FR Doc. 03-31751 Filed 12-23-03; 8:45 am]

BILLING CODE 4910-13-M