Skip to Content

Notice

Draft Regulatory Guide; Issuance, Availability

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

The Nuclear Regulatory Commission (NRC) has issued for public comment a proposed revision of a guide in its Regulatory Guide Series. Regulatory Guides are developed to describe and make available to the public such information as methods acceptable to the NRC staff for implementing specific parts of the NRC's regulations, techniques used by the staff in evaluating specific problems or postulated accidents, and data needed by the staff in its review of applications for permits and licenses.

The draft guide is temporarily identified by its task number, DG-1129, which should be mentioned in all correspondence concerning this draft guide. The proposed Revision 3 of Regulatory Guide 1.75, Draft Regulatory Guide DG-1129, “Criteria for Independence of Electrical Safety Systems,” is being developed to describe a method that is acceptable to the NRC staff for complying with the NRC's regulations with respect to the physical independence requirements of the circuits and electric equipment that compose or are associated with safety systems. The guide proposes to endorse the Institute of Electrical and Electronics Engineers standard IEEE Std. 384-1992, “Standard Criteria for Independence of Class 1E Equipment and Circuits.”

This draft guide has not received complete staff approval and does not represent an official NRC staff position.

Comments may be accompanied by relevant information or supporting data. Written comments may be submitted by mail to the Rules and Directives Branch, Office of Administration, U.S. Nuclear Regulatory Commission, Washington, DC 20555; or they may be hand-delivered to the Rules and Directives Branch, Office of Administration, at 11555 Rockville Pike, Rockville, MD. Copies of comments received may be examined at the NRC Public Document Room, 11555 Rockville Pike, Rockville, MD. Comments will be most helpful if received by March 12, 2004.

You may also provide comments via the NRC's interactive rulemaking Web site through the NRC Home page (http://www@nrc.gov). This site provides the ability to upload comments as files (any format) if your Web browser supports that function. For information about the interactive rulemaking web site, contact Ms. Carol Gallagher, (301) 415-5905; e-mail CAG@NRC.GOV. For technical information about Draft Regulatory Guide DG-1079, contact Mr. S.K. Aggarwal at (301) 415-6005, (e-mail SKA@NRC.GOV).

Although a deadline is given for comments on these draft guides, comments and suggestions in connection with items for inclusion in guides currently being developed or improvements in all published guides are encouraged at any time.

Regulatory guides are available for inspection at the NRC's Public Document Room, 11555 Rockville Pike, Rockville, MD; the PDR's mailing address is USNRC PDR, Washington, DC 20555; telephone (301) 415-4737 or (800) 397-42056; fax (301) 415-3548; e-mail PDR@NRC.GOV. Requests for single copies of draft or final regulatory guides (which may be reproduced) or for placement on an automatic distribution list for single copies of future draft guides in specific divisions should be made in writing to the U.S. Nuclear Regulatory Commission, Washington, DC 20555, Attention: Reproduction and Distribution Services Section, or by fax to (301) 415-2289; e-mail DISTRIBUTION@NRC.GOV. Telephone requests cannot be accommodated. Regulatory guides are not copyrighted, and NRC approval is not required to reproduce them. (5 U.S.C. 552(a))

Start Signature

Dated at Rockville, Maryland, this 12th day of December 2003.

For the Nuclear Regulatory Commission.

Michael Mayfield,

Director, Division of Engineering Technology, Office of Nuclear Regulatory Research.

End Signature End Preamble

[FR Doc. 04-788 Filed 1-13-04; 8:45 am]

BILLING CODE 7590-01-P