Skip to Content

Notice

Certain Hot-Rolled Carbon Steel Flat Products from Thailand: Rescission of Antidumping Duty Administrative Review

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of Rescission of Antidumping Duty Administrative Review.

EFFECTIVE DATE:

April 7, 2004.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Ann Barnett-Dahl or Helen Kramer at (202) 482-3833 or (202) 482-0405, respectively; Antidumping and Countervailing Duty Enforcement Group III, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, N.W., Washington, DC 20230.

End Further Info

SUMMARY:

On December 24, 2003, in response to requests made by Nucor Corporation (“Nucor”) and U.S. Steel Corporation (“U.S. Steel”), the Department of Commerce (the Department) published in the Federal Register (68 FR 74550-02) a notice announcing the initiation of an administrative review of the antidumping duty order on certain hot-rolled carbon steel flat products from Thailand. The review period is November 1, 2002 October 31, 2003. This review has now been rescinded because Nucor and U.S. Steel have withdrawn their requests for review.

Scope of the Review

For purposes of this review, the products covered are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths, of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this review.

Specifically included within the scope of this review are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.

Steel products to be included in the scope of this review, regardless of Start Printed Page 18350definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: i) iron predominates, by weight, over each of the other contained elements; ii) the carbon content is 2 percent or less, by weight; and iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

1.80 percent of manganese, or

2.25 percent of silicon, or

1.00 percent of copper, or

0.50 percent of aluminum, or

1.25 percent of chromium, or

0.30 percent of cobalt, or

0.40 percent of lead, or

1.25 percent of nickel, or

0.30 percent of tungsten, or

0.10 percent of molybdenum, or

0.10 percent of niobium, or

0.15 percent of vanadium, or

0.15 percent of zirconium.

All products that meet the physical and chemical description provided above are within the scope of this review unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this review:

  • Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506).
  • Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher.
  • Ball bearing steels, as defined in the HTSUS.
  • Tool steels, as defined in the HTSUS.
  • Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
  • ASTM specifications A710 and A736.
  • USS abrasion-resistant steels (USS AR 400, USS AR 500).
  • All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
  • Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.

The merchandise subject to this review is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, and 7211.19.75.90. Certain hot-rolled carbon steel flat products covered by this review, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and CBP purposes, the written description of the merchandise under review is dispositive.

Background

On November 26, 2003, Nucor, and on November 28, 2003, U.S. Steel (Petitioners) requested an administrative review of the antidumping duty order on certain hot-rolled carbon steel flat products from Thailand. On December 24, 2003, the Department published in the Federal Register (68 FR 74550-02) Notice of Initiation of Antidumping and Countervailing Duty Administrative Review. On March 19, 2003, both Nucor and U.S. Steel withdrew their requests for review. The applicable regulation, 19 CFR 351.213(d)(1), states that if a party that requested an administrative review withdraws the request within 90 days of the publication of the notice of initiation of the requested review, the Secretary will rescind the review. Given that Nucor and U.S. Steel were the only parties to request the administrative review, and their withdrawal requests are timely, we are rescinding this review of the antidumping duty order on certain hot-rolled carbon steel flat products from Thailand covering the period November 1, 2002 to October 31, 2003.

This notice is issued and published in accordance with section 777(i) of the Act and 19 CFR 351.213(d)(4).

Start Signature

Dated: March 31, 2004.

Jeffery A. May,

Acting Assistant Secretary for Import Administration.

End Signature End Preamble

[FR Doc. 04-7874 Filed 4-6-04; 8:45 am]

BILLING CODE 3510-DS-S