This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
Import Administration, International Trade Administration, Department of Commerce.
May 11, 2004.
Notice of initiation of changed circumstances review.
In accordance with 19 CFR 351.216(b) (2003), the Coalition for Fair Lumber Imports Executive Committee, the petitioner in this case, filed a request for a changed circumstances review of the antidumping duty order on certain softwood lumber products from Canada, as described below. In response to this request, the Department of Commerce (the Department) is initiating a changed circumstances review of the antidumping order on certain softwood lumber from Canada.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Amber Musser or Constance Handley, at (202) 482-1777 or (202) 482-0631, respectively; Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230.End Further Info End Preamble Start Supplemental Information
As a result of the antidumping duty order issued following the completion of the less-than-fair-value investigation of certain softwood lumber products from Canada, imports of softwood lumber from Canfor Corporation (Canfor) and Slocan Forest Products (Slocan), which were both respondents, received company-specific cash-deposit rates (see Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Order: Certain Softwood Lumber Products from Canada, 67 FR 36068 (May 22, 2002)). Both companies are participating as separate companies in the ongoing first administrative review of this order, which covers the period May 22, 2002, through April 30, 2003. The petitioner has provided the Department of Commerce (the Department) with information indicating that as of April 1, 2004, Canfor and Slocan completed the merger of their lumber operations. As a result, the petitioner is requesting that the Department initiate a changed circumstances review to establish a new cash-deposit rate for the merged entity. Id.
Scope of the Order
The products covered by this order are softwood lumber, flooring and siding (softwood lumber products). Softwood lumber products include all products classified under headings 4407.1000, 4409.1010, 4409.1090, and 4409.1020, respectively, of the Harmonized Tariff Schedule of the United States (HTSUS), and any softwood lumber, flooring and siding described below. These softwood lumber products include:
(1) Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or Start Printed Page 26073not planed, sanded or finger-jointed, of a thickness exceeding six millimeters;
(2) Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed;
(3) Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or finger-jointed; and
(4) Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed.
Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise under investigation is dispositive. Preliminary scope exclusions and clarifications were published in three separate Federal Register notices.
Softwood lumber products excluded from the scope:
- Trusses and truss kits, properly classified under HTSUS 4418.90.
- I-joist beams.
- Assembled box spring frames.
- Pallets and pallet kits, properly classified under HTSUS 4415.20.
- Garage doors.
- Edge-glued wood, properly classified under HTSUS 44126.96.36.199 (formerly HTSUS 44188.8.131.52).
- Properly classified complete door frames.
- Properly classified complete window frames.
- Properly classified furniture.
Softwood lumber products excluded from the scope only if they meet certain requirements:
- Stringers (pallet components used for runners): if they have at least two notches on the side, positioned at equal distance from the center, to properly accommodate forklift blades, properly classified under HTSUS 44184.108.40.206 (formerly HTSUS 44220.127.116.11).
- Box-spring frame kits: if they contain the following wooden pieces—two side rails, two end (or top) rails and varying numbers of slats. The side rails and the end rails should be radius-cut at both ends. The kits should be individually packaged, they should contain the exact number of wooden components needed to make a particular box spring frame, with no further processing required. None of the components exceeds 1″ in actual thickness or 83″ in length.
- Radius-cut box-spring-frame components, not exceeding 1” in actual thickness or 83″ in length, ready for assembly without further processing. The radius cuts must be present on both ends of the boards and must be substantial cuts so as to completely round one corner. $ Fence pickets requiring no further processing and properly classified under HTSUS 4421.90.70, 1″ or less in actual thickness, up to 8″ wide, 6″ or less in length, and have finials or decorative cuttings that clearly identify them as fence pickets. In the case of dog-eared fence pickets, the corners of the boards should be cut off so as to remove pieces of wood in the shape of isosceles right angle triangles with sides measuring 3/4 inch or more.
- U.S. origin lumber shipped to Canada for minor processing and imported into the United States, is excluded from the scope of this order if the following conditions are met: (1) the processing occurring in Canada is limited to kiln-drying, planing to create smooth-to-size board, and sanding, and (2) if the importer establishes to U.S. Customs and Border Protection's (CBP) satisfaction that the lumber is of U.S. origin.
- Softwood lumber products contained in single family home packages or kits, regardless of tariff classification, are excluded from the scope of the orders if the following criteria are met:
1. The imported home package or kit constitutes a full package of the number of wooden pieces specified in the plan, design or blueprint necessary to produce a home of at least 700 square feet produced to a specified plan, design or blueprint;
2. The package or kit must contain all necessary internal and external doors and windows, nails, screws, glue, subfloor, sheathing, beams, posts, connectors and if included in purchase contract decking, trim, drywall and roof shingles specified in the plan, design or blueprint;
3. Prior to importation, the package or kit must be sold to a retailer of complete home packages or kits pursuant to a valid purchase contract referencing the particular home design plan or blueprint, and signed by a customer not affiliated with the importer;
4. The whole package must be imported under a single consolidated entry when permitted by CBP, whether or not on a single or multiple trucks, rail cars or other vehicles, which shall be on the same day except when the home is over 2,000 square feet;
5. The following documentation must be included with the entry documents:
- A copy of the appropriate home design, plan, or blueprint matching the entry;
- A purchase contract from a retailer of home kits or packages signed by a customer not affiliated with the importer;
- A listing of inventory of all parts of the package or kit being entered that conforms to the home design package being entered;
- In the case of multiple shipments on the same contract, all items listed immediately above which are included in the present shipment shall be identified as well.
We have determined that the excluded products listed above are outside the scope of this order provided the specified conditions are met. Lumber products that CBP may classify as stringers, radius cut box-spring-frame components, and fence pickets, not conforming to the above requirements, as well as truss components, pallet components, and door and window frame parts, are covered under the scope of this order and may be classified under HTSUS subheadings 4418.104.22.168, 4422.214.171.124, and 44126.96.36.199. Due to changes in the 2002 HTSUS whereby subheading 44188.8.131.52 and 44184.108.40.206 were changed to 44220.127.116.11 and 4418.104.22.168, respectively, we are adding these subheadings as well.
In addition, this scope language has been further clarified to now specify that all softwood lumber products entered from Canada claiming non-subject status based on U.S. country of origin will be treated as non-subject U.S.-origin merchandise under the countervailing duty order, provided that these softwood lumber products meet the following condition: upon entry, the importer, exporter, Canadian processor and/or original U.S. producer establish to CBP's satisfaction that the softwood lumber entered and documented as U.S.-origin softwood lumber was first produced in the United States as a lumber product satisfying the physical parameters of the softwood lumber Start Printed Page 26074scope. The presumption of non-subject status can, however, be rebutted by evidence demonstrating that the merchandise was substantially transformed in Canada.
Initiation of Changed Circumstances Review
Pursuant to section 751(b)(1) of the Tariff Act of 1930, as amended (the Act), the Department will conduct a changed circumstances review upon receipt of information concerning, or a request from an interested party for a review of, an antidumping duty order which shows changed circumstances sufficient to warrant a review of the order. The petitioner contends that, now that Slocan and Canfor are no longer separate companies, they should have a combined cash-deposit rate. In accordance with 19 CFR 351.216(d), the Department finds there is sufficient information to warrant initiating a changed circumstances review. Therefore, pursuant to section 751(b)(1) of the Act and 19 CFR 351.216(d), we are initiating a changed circumstances administrative review to determine the facts surrounding the merger and what cash-deposit rate should be applied to entries produced and exported by the merged entity.
The Department will publish in the Federal Register a notice of preliminary results of changed circumstances antidumping duty administrative review in accordance with 19 CFR 351.221(b)(4) and 351.221(c)(3)(i), which will set forth the Department's preliminary factual and legal conclusions. Pursuant to 19 CFR 351.221(b)(4)(ii) interested parties will have an opportunity to comment on the preliminary results. The Department will issue its final results of review in accordance with the time limits set forth in 19 CFR 351.216(e).
This notice is in accordance with section 751(b)(1) of the Act.Start Signature
Dated: May 4, 2004.
James J. Jochum,
Assistant Secretary for Import Administration.
1. See letter from the petitioner to the Department, dated April 22, 2004.Back to Citation
2. To ensure administrability, we clarified the language of this exclusion to require an importer certification and to permit single or multiple entries on multiple days as well as instructing importers to retain and make available for inspection specific documentation in support of each entry.Back to Citation
3. See the scope clarification message (3034202), dated February 3, 2003, to CBP, regarding treatment of U.S.-origin lumber on file in the Central Records Unit, Room B-099 of the main Commerce Building.Back to Citation
[FR Doc. E4-1073 Filed 5-10-04; 8:45 am]
BILLING CODE 3510-DS-P