Skip to Content

Notice

Highway Safety Programs; Model Specifications for Devices To Measure Breath Alcohol

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble Start Printed Page 42237

AGENCY:

National Highway Traffic Safety Administration, DOT.

ACTION:

Notice.

SUMMARY:

This notice amends the Conforming Products List for instruments that conform to the Model Specifications for Evidential Breath Testing Devices (62 FR 62091).

EFFECTIVE DATE:

July 14, 2004.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Dr. James F. Frank, Office of Research and Technology, Behavioral Research Division (NTI-131), National Highway Traffic Safety Administration, 400 Seventh Street, SW., Washington, DC 20590; Telephone: (202) 366-5593.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

On November 5, 1973, the National Highway Traffic Safety Administration (NHTSA) published the Standards for Devices to Measure Breath Alcohol (38 FR 30459). A Qualified Products List of Evidential Breath Measurement Devices comprised of instruments that met this standard was first issued on November 21, 1974 (39 FR 41399).

On December 14, 1984 (49 FR 48854), NHTSA converted this standard to Model Specifications for Evidential Breath Testing Devices, and published a Conforming Products List (CPL) of instruments that were found to conform to the Model Specifications as Appendix D to that notice (49 FR 48864).

On September 17, 1993, NHTSA published a notice (58 FR 48705) to amend the Model Specifications. The notice changed the alcohol concentration levels at which instruments are evaluated, from 0.000, 0.050, 0.101, and 0.151 BAC, to 0.000, 0.020, 0.040, 0.080, and 0.160 BAC; added a test for the presence of acetone; and expanded the definition of alcohol to include other low molecular weight alcohols including methyl or isopropyl. On October 3, 2002, the most recent amendment to the Conforming Products List (CPL) was published (67 FR 62091), identifying those instruments found to conform with the Model Specifications.

Since the last publication of the CPL, two (2) instruments have been evaluated and found to meet the model specifications, as amended on September 17, 1993, for mobile and non-mobile use. In alphabetical order by company, they are: (1) The Alcotest 6510 manufactured by Draeger Safety, Inc., Durango, CO. This is a hand held device intended for use in stationary or roadside operation and is powered by an internal battery. It uses a fuel cell sensor. (2) The Alco-Sensor FST manufactured by Intoximeters, Inc, St. Louis, MO. This is a hand held device intended for use in stationary or roadside operation and is powered by an internal battery. It uses a fuel cell sensor. Finally, a technical correction has to be made in the name of one device on the CPL. The current CPL lists the “Intox EC/IR 2” manufactured by Intoximeters, Inc., St. Louis, MO, but the device should be listed as “Intox EC/IR II.”

The CPL has been amended to add the two instruments identified above to the list, and to make the one technical correction indicated.

In accordance with the foregoing, the CPL is therefore amended, as set forth below.

Conforming Products List of Evidential Breath Measurement Devices

Manufacturer and modelMobileNonmobile
Alcohol Countermeasure Systems Corp. Mississauga, Ontario, Canada:
Alert J3AD*XX
Alert J4X.ecXX
PBA3000CXX
BAC Systems, Inc., Ontario, Canada: Breath Analysis Computer*XX
CAMEC Ltd., North Shields, Tyne and Ware, England: IR Breath Analyzer*XX
CMI, Inc., Owensboro, KY:
Intoxilyzer Model:
200XX
200DXX
300XX
400XX
400PAXX
1400XX
4011*XX
4011A*XX
4011AS*XX
4011AS-A*XX
4011AS-AQ*XX
4011 AW*XX
4011A27-10100*XX
4011A27-10100 with filter*XX
5000XX
5000 (w/Cal. Vapor Re-Circ.)XX
5000 (w/3/8″ ID Hose option)XX
5000CDXX
5000CD/FG5XX
5000ENXX
5000 (CAL DOJ)XX
5000VAXX
8000XX
PAC 1200*XX
S-D2XX
S-D5XX
Start Printed Page 42238
Draeger Safety, Inc., Durango, CO:
Alcotest Model:
6510XX
7010*XX
7110*XX
7110 MKIIIXX
7110 MKIII-CXX
7410XX
7410 PlusXX
Breathalyzer Model:
900*XX
900A*XX
900BG*XX
7410XX
7410-IIXX
Gall's Inc., Lexington, KY: Alcohol Detection System—A.D.S. 500XX
Intoximeters, Inc., St. Louis, MO:
Photo Electric Intoximeter*X
GC Intoximeter MK II*XX
GC Intoximeter MK IV*XX
Auto Intoximeter*XX
Intoximeter Model:
3000*XX
3000 (rev B1)*XX
3000 (rev B2)*XX
3000 (rev B2A)*XX
3000 (rev B2A) w/FM option*XX
3000 (Fuel Cell)*XX
3000 D*XX
3000 DFC*XX
AlcomonitorX
Alcomonitor CCXX
Alco-Sensor IIIXX
Alco-Sensor III (Enhanced with Serial Numbers above 1,200,000)XX
Alco-Sensor IVXX
Alco-Sensor IV-XLXX
Alco-Sensor AZXX
Alco-Sensor FSTXX
RBT-AZXX
RBT IIIXX
RBT III-AXX
RBT IVXX
RBT IV with CEM (cell enhancement module)XX
Intox EC/IRXX
Intox EC/IR IIXX
Portable Intox EC/IRXX
Komyo Kitagawa, Kogyo, K.K.:
Alcolyzer DPA-2*XX
Breath Alcohol Meter PAM 101B*XX
Lifeloc Technologies, Inc., (formerly Lifeloc, Inc.), Wheat Ridge, CO:
PBA 3000BXX
PBA 3000-P*XX
PBA 3000CXX
Alcohol Data SensorXX
PhoenixXX
FC 10XX
FC 20XX
Lion Laboratories, Ltd., Cardiff, Wales, UK:
Alcolmeter Model:
300XX
400XX
SD-2*XX
EBA*XX
Intoxilyzer Model:
200XX
200DXX
1400XX
5000 CD/FG5XX
5000 ENXX
Luckey Laboratories, San Bernadino, CA:
Alco-Analyzer Model:
1000*X
Start Printed Page 42239
2000*X
National Draeger, Inc., Durango, CO:
Alcotest Model:
7010*XX
7110*XX
7110 MKIIIXX
7110 MKIII-CXX
7410XX
7410 PlusXX
Breathalyzer Model:
900*XX
900A*XX
900BG*XX
7410XX
7410-IIXX
National Patent Analytical Systems, Inc., Mansfield, OH:
BAC DataMaster (with or without the Delta-1 accessory)XX
BAC Verifier DataMaster (with or without the Delta-1 accessory)XX
DataMaster cdm (with or without the Delta-1 accessory)XX
Omicron Systems, Palo Alto, CA:
Intoxilyzer Model:
4011*XX
4011AW*XX
Plus 4 Engineering, Minturn, CO: 5000 Plus4*XX
Seres, Paris, France:
Alco MasterXX
AlcoproXX
Siemans-Allis, Cherry Hill, NJ:
Alcomat*XX
Alcomat F*XX
Smith and Wesson Electronics, Springfield, MA:
Breathalyzer Model:
900*XX
900A*XX
1000*XX
2000*XX
2000 (non-Humidity Sensor)*XX
Sound-Off, Inc., Hudsonville, MI:
AlcoDataXX
Seres Alco MasterXX
Seres AlcoproXX
Stephenson Corp.: Breathalyzer 900*XX
U.S. Alcohol Testing, Inc./Protection Devices, Inc., Rancho Cucamonga, CA:
Alco-Analyzer 1000X
Alco-Analyzer 2000X
Alco-Analyzer 2100XX
Verax Systems, Inc., Fairport, NY:
BAC Verifier*XX
BAC Verifier DatamasterXX
BAC Verifier Datamaster II*XX
*Instruments marked with an asterisk (*) meet the Model Specifications detailed in 49 FR 48854 (December 14, 1984) (i.e., instruments tested at 0.000, 0.050, 0.101, and 0.151 BAC). Instruments not marked with an asterisk meet the Model Specifications detailed in 58 FR 48705 (September 17, 1993), and were tested at BACs = 0.000, 0.020, 0.040, 0.080, and 0.160. All instruments that meet the Model Specifications currently in effect (dated September 17, 1993) also meet the Model Specifications for Screening Devices to Measure Alcohol in Bodily Fluids.
Start Signature

(23 U.S.C. 402; delegations of authority at 49 CFR 1.50 and 501.1)

Issued on: July 9, 2004.

Marilena Amoni,

Associate Administrator for Program Development and Delivery.

End Signature End Supplemental Information

[FR Doc. 04-15970 Filed 7-13-04; 8:45 am]

BILLING CODE 4910-59-P