Skip to Content


Petitions for Exemption; Dispositions of Petitions Issued

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Federal Aviation Administration (FAA), DOT.


Notice of dispositions of prior petitions.


Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains the dispositions of certain petitions previously received. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.

Start Further Info


Susan Boylon, (425-227-1152), Transport Airplane Directorate (ANM-113), Federal Aviation Administration, 1601 Lind Ave, SW., Renton, WA 98055-4056; or John Linsenmeyer (202-267-5174), Office of Rulemaking (ARM-1), Federal Aviation Administration, 800 Independence Avenue, SW., Washington, DC 20591.

This notice is published pursuant to 14 CFR 11.85 and 11.91.

Start Signature

Issued in Washington, DC, on July 26, 2004.

Anthony F. Fazio,

Director, Office of Rulemaking.

End Signature

Dispositions of Petitions

Docket No.: FAA-2004-17909.

Petitioner: The Boeing Company.

Section of 14 CFR Affected: 14 CFR 25.301, 25.303, 25.305 and 25.901(c). Start Printed Page 47206

Description of Relief Sought/Disposition: To permit type certification of the modifications to the thrust reverser type designs of Boeing Model 777 airplanes without a complete showing of compliance. These requirements relate to the structural strength, deformation and failure of the thrust reverser inner wall panels during a rejected takeoff related thrust reverser deployment at high engine power.

Time Limited Partial Grant of Exemption, 07/15/2004, Exemption No. 8329A.

End Further Info End Preamble

[FR Doc. 04-17690 Filed 8-3-04; 8:45 am]