Environmental Protection Agency (EPA).
The EPA is proposing to approve revisions to the particulate matter (PM) and sulfur dioxide (SO2) emission requirements for Pfizer, Inc. (Pfizer). Pfizer operates a medicinal chemical manufacturing facility in Vigo County, Indiana. On October 7, 2004, Indiana submitted a request for PM and SO2 emission limit revisions as an amendment to its State Implementation Plan (SIP). Pfizer has removed five boilers from its facility. Indiana has requested the deletion of the site-specific PM and SO2 emission limits for all five removed boilers. A new boiler has replaced three of the removed boilers. It is subject to the applicable Start Printed Page 9574New Source Performance Standards. There will be no increase in PM or SO2 emissions as a result of the requested revisions.
Written comments must be received on or before March 30, 2005.
Submit comments, identified by Regional Material in EDocket (RME) ID No. R05-OAR-2004-IN-0007 by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. Agency Web site: http://docket.epa.gov/rmepub/index.jsp. RME, EPA's electronic public docket and comment system, is EPA's preferred method for receiving comments. Once in the system, select “quick search,” then key in the appropriate RME Docket identification number. Follow the on-line instructions for submitting comments.
Fax: (312) 886-5824.
Mail: You may send written comments to:
John Mooney, Chief, Criteria Pollutant Section, (AR-18J), U.S. Environmental Protection Agency, 77 West Jackson Boulevard, Chicago, Illinois 60604.
Hand delivery: Deliver your comments to: John Mooney, Chief, Criteria Pollutant Section (AR-18J), U.S. Environmental Protection Agency, Region 5, 77 West Jackson Boulevard, 18th floor, Chicago, Illinois 60604.
Such deliveries are only accepted during the Regional Office's normal hours of operation. The Regional Office's official hours of business are Monday through Friday, 8:30 a.m. to 4:30 p.m. excluding Federal holidays.
Instructions: Direct your comments to RME ID No. R05-OAR-2004-IN-0007. EPA's policy is that all comments received will be included in the public docket without change, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through RME, regulations.gov, or e-mail. The EPA RME Web site and the federal regulations.gov website are “anonymous access” systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through RME or regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional instructions on submitting comments, go to Section I of the SUPPLEMENTARY INFORMATION section of this document.
Docket: All documents in the electronic docket are listed in the RME index at http://www.epa.gov/rmepub/index.jsp. Although listed in the index, some information is not publicly available, i.e., CBI or other information whose disclosure is restricted by statute. Publicly available docket materials are available either electronically in RME or in hard copy at Environmental Protection Agency, Region 5, Air and Radiation Division, 77 West Jackson Boulevard, Chicago, Illinois 60604. Please telephone Matt Rau at (312) 886-6524 before visiting the Region 5 Office.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Matt Rau, Environmental Engineer, Criteria Pollutant Section, Air Programs Branch (AR-18J), USEPA, Region 5, 77 West Jackson Boulevard, Chicago, Illinois 60604, (312) 886-6524. Rau.firstname.lastname@example.org.End Further Info End Preamble Start Supplemental Information
I. General Information.
A. Does This Action Apply to me?
B. What Should I Consider as I Prepare my Comments for EPA?
II. What Action is EPA Taking Today?
III. Where can I Find More Information About This Proposal and the Corresponding Direct Final Rule?
I. General Information
A. Does This Action Apply to Me?
This action applies to a single source, Pfizer, Incorporated in Vigo County, IN.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit Confidential Business Information to EPA through RME, regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
2. Tips for Preparing Your Comments. When submitting comments, remember to:
a. Identify the rulemaking by docket number and other identifying information (subject heading, Federal Register date and page number).
b. Follow directions—The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.
c. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.
d. Describe any assumptions and provide any technical information and/or data that you used.
e. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.
f. Provide specific examples to illustrate your concerns, and suggest alternatives.
g. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.
h. Make sure to submit your comments by the comment period deadline identified.
II. What Action Is EPA Taking Today?
The EPA is proposing to approve revisions to the particulate matter and sulfur dioxide emission requirements for Pfizer. On October 7, 2004, Indiana submitted a request for PM and SO2 emissions limit revisions as an amendment to its SIP. Pfizer is replacing three boilers and removing two additional boilers. Indiana requested deleting the limits for all five boilers. The new boiler is subject to the new source performance standard limits for PM and SO2 emissions which are not being revised. The requested SIP revisions consist of the limit deletions only. There will be no increase in PM or SO2 emissions from the requested revisions. Pfizer operates a medicinal chemical manufacturing facility in Vigo County, Indiana.
III. Where Can I Find More Information About This Proposal and the Corresponding Direct Final Rule?
For additional information, see the Direct Final Rule which is located in the Rules section of this Federal Register. Start Printed Page 9575Copies of the request and the EPA's analysis are available electronically at RME or in hard copy at the above address. Please telephone Matt Rau at (312) 886-6524 before visiting the Region 5 Office.Start Signature
Dated: February 10, 2005.
Acting Regional Administrator, Region 5.
[FR Doc. 05-3676 Filed 2-25-05; 8:45 am]
BILLING CODE 6560-50-P