Skip to Content

Notice

Certain New Chemicals; Receipt and Status Information

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 20, 2005 to February 18, 2005, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2005-0016 and the specific PMN number or TME number, must be received on or before April 13, 2005.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2005-0016. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.

Start Printed Page 12479

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket/​, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2005-0016. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2005-0016 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-20050016 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be Start Printed Page 12480disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 20, 2005 to February 18, 2005, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 89 Premanufacture Notices Received From: 01/20/05 to 02/18/05

Case No.Received DateProjected Notice End DateManufacturer/ImporterUseChemical
P-05-024601/21/0504/20/05CBI(G) Catalyst(G) Sodium salt of a sulfonic acid derivative
P-05-024701/21/0504/20/05CBI(G) Printing ink(G) 3-phenylimino-6-oxo-1,4-cyclohexadiene derivative
P-05-024801/21/0504/20/05CBI(G) Printing ink(G) 5-amino-4-nitrophenylazo-1-phenylpirazole derivative
P-05-024901/21/0504/20/05CBI(G) Additive, open, non-dispersive use(G) Allyl compounds, copolymers with unsaturated acids
P-05-025001/21/0504/20/05CBI(G) Additive, open, non-dispersive use(G) Allyl compounds, copolymers with unsaturated acids
P-05-025101/21/0504/20/05CBI(G) Semiconductor coating(G) Hydroxy aromatics, polymer with fluorinated aromatics
P-05-025201/24/0504/23/05Henkel Corporation(S) A component of adhesives for bonding, sealing, encapsulating and potting(S) 1,3-butadiene, homopolymer, hydroxy-terminated, bis[[[(isocyanatophenyl)methyl] phenyl]carbamate]
P-05-025301/24/0504/23/05Ashland Inc., Environmental Health and Safety(G) Adhesive, coating, ink(G) 2-propenoic acid, bis (alkyldiyliminocarbonyloxy-2,1-ethanediyl) ester
P-05-025401/24/0504/23/05Ashland Inc., Environmental Health and Safety(G) Adhesive, coating, ink(G) Alkanoic acid, bis (alkyldiyliminocarbonyloxy)]bis-, bis[6-oxo-6-[2-[1-oxo-2-propenyl] oxy] ethoxy] hexyl] ester
P-05-025501/24/0504/23/05Ashland Inc., Environmental Health and Safety(G) Adhesive, coating, ink(G) Dioxadiazaalkanoic acid, 2-[(1-oxo-2-propenyl) oxy]ethyl ester
P-05-025601/24/0504/23/05Ashland Inc., Environmental Health and Safety(G) Adhesive, coating, ink(G) Dioxadiazaalkanoic acid, bis[2-[(1-oxo-2-propenyl) oxy]ethyl] ester
Start Printed Page 12481
P-05-025701/24/0504/23/05Ashland Inc., Environmental Health and Safety(G) Adhesive, coating, ink(G) 2-propenoic acid, 2-[[[[[alkyl- [[[2-[(1-oxo-2-propenyl)oxy]alkoxy]carbonyl] amino] alkyl]methyl]amino]carbonyl]oxy] ethyl ester
P-05-025801/24/0504/23/05Ashland Inc., Environmental Health and Safety(G) Adhesive, coating, ink(G) Diisocyanato alkane homopolymer, 2-hydroxyethyl acrylate-blocked
P-05-025901/25/0504/24/05Henkel Corporation(S) A component of adhesive formulations for general industrial bonding applications(S) Tricyclodecanedimethanol, polymer with 2,4-diisocyanato-1-methylbenzne and .alpha.-hydro-.omega.-hydroxypoly(oxy-1,4-butanediyl), 2-hydroxyethyl acrylate-blocked
P-05-026001/25/0504/24/05CBI(S) Adhesion promoter for window sealant (at oem)(G) aminoalkoxpolysiloxane
P-05-026101/26/0504/25/05CBI(G) Reactant used in internal manufacture of polymers(G) Phenol-substituted amide
P-05-026201/26/0504/25/05CBI(S) Chemical intermediate(G) Halogenated alkene
P-05-026301/26/0504/25/05CBI(G) Functional coating polymer(G) Acrylic copolymer
P-05-026401/28/0504/27/05CBI(S) Resin for coatings applied by electrodeposition(G) Amine functional epoxy resin salted with organic acid
P-05-026501/28/0504/27/05CBI(S) Resin for coatings applied by electrodeposition(G) Amine functional epoxy resin salted with organic acid
P-05-026601/28/0504/27/05CBI(S) Resin for coatings applied by electrodeposition(G) Amine functional epoxy resin salted with organic acid
P-05-026701/28/0504/27/05Wacker Silicones a Division of Wacker Chemical Corporation(S) Crosslinker in elastomer products(G) Polydimethyl fluoroalkyl hydrogen siloxane
P-05-026801/28/0504/27/05Macdermid Incorporated(G) Photocure polymer, open non-dispersive use(G) Oxirane, methyl-, polymer with 1,3-diisocyanatomethylbenzene, alpha-hydro-omega-hydroxypoly[oxy(methyl-1,2-ethanediyl)] and oxirane, poly(alkyl)glycol acrylate-blocked
P-05-026901/31/0504/30/05CBI(G) softening of cellulose(G) Polyethanolamine diester with fatty acids dialkyl sulfate salts
P-05-027001/31/0504/30/05CBI(S) softening of cellulose(G) Polyethanolamine diester with fatty acids dialkyl sulfate salts
P-05-027101/31/0504/30/05CBI(S) softening of cellulose(G) Polyethanolamine diester with fatty acids dialkyl sulfate salts
P-05-027201/31/0504/30/05CBI(S) softening of cellulose(G) Polyethanolamine diester with fatty acids dialkyl sulfate salts
P-05-027302/01/0505/01/05Surface Specialties, Inc.(S) Dispersant for industrial coatings concentrates(G) Alkanolactone, polymer with substituted 2h-pyran-2-one, 2-(2-butoxyethoxy)ethyl ester, phosphate
P-05-027402/01/0505/01/05CBI(G) Open, non-dispersive (component of leather finishing system)(G) Polyester carbonate-based polyurethane-polyurea
P-05-027502/01/0505/01/05CBI(G) Ultra violet photoinitiator(G) Di(alkyl phenyl) iodonium hexafluoroantimonate
P-05-027602/01/0505/01/05CBI(G) Paint component(G) Rare earth salt of a carboxylic acid
P-05-027701/24/0504/23/05Global Matrechs, Inc(S) Flooring; top clear coating(G) Urethane containing polyamine
P-05-027801/24/0504/23/05Global Matrechs, Inc(S) Paints; top clear coatings(G) Urethane containing polyamine
P-05-027902/01/0505/01/05CBI(G) Panel laminating adhesive(G) Polyurethane polymer
P-05-028001/24/0504/23/05Global Matrechs, Inc(S) Paints; top clear coatings(G) Urethane containing polyamine
P-05-028102/02/0505/02/05Global Matrechs, Inc(S) Flooring; paints; top clear coatings(G) Aliphatic cyclocarbonate
P-05-028202/03/0505/03/05CBI(G) Polymerization aid(G) Bis(polyalkyl-alkoxy-polyheteroatom containing alkanoic acid) derivative
P-05-028302/03/0505/03/05CBI(G) Polymerization aid(G) Polyalkyl-alkoxy-polyheteroatom containing alkanoic acid
P-05-028402/03/0505/03/05CBI(G) Open, non-dispersive use(G) Styrene acrylate copolymer
P-05-028502/04/0505/04/05CBI(G) Fuel additive(G) Butanedioic acid, monopolyisobutylene derivatives., ethylene esters, compounds with alkanolamine (1:2)
Start Printed Page 12482
P-05-028602/04/0505/04/05CBI(S) Hydraulic fracturing additive(G) Aklyl phosphonate
P-05-028702/07/0505/07/05Applied Power Concepts, Inc.(G) A bioremediation material for chlorinated hydrocarbons.(S) Glycerides, tall-oil di-, mono [2-[2-[2-(2-hydroxy-1-oxopropoxy)-1-oxopropoxyl]-1-oxopropoxy]propanoates]
P-05-028802/07/0505/07/05Meadwestvaco Corporation - Specialty Chemicals Division(S) Rosin/acrylic support resin for printing inks(G) Tall oil modified aromatic acrylic polymer
P-05-028902/07/0505/07/05Meadwestvaco Corporation - Specialty Chemicals Division(S) Rosin/acrylic support resin for printing inks(G) Tall oil modified aromatic acrylic polymer, ammonium salt
P-05-029002/07/0505/07/05PPG Industries, Inc.(G) Component of an automotive refinish direct-gloss topcoat(G) Alkanediocic acid, polymer with 1,3,5-tris(substituted alkyl)-1,3,5-triazine-2,4,6(1h,3h,5h)-trione, alkanoate (ester) 3-substituted-2-(substituted alkyl)-2-alkanoate (ester)
P-05-029102/08/0505/08/05Lubrizol Metalworking Additives(S) Anti-corrosion additive for metalworking fluids(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 2-aminoethanol
P-05-029202/08/0505/08/05Lubrizol Metalworking Additives(S) Anti-corrosion additive for metalworking fluids(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 2-amino-2-methyl-1-propanol
P-05-029302/08/0505/08/05Lubrizol Metalworking Additives(S) Anti-corrosion additive for metalworking fluids(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 1-amino-2-propanol
P-05-029402/08/0505/08/05Lubrizol Metalworking Additives(S) Anti-corrosion additive for metalworking fluids(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 1,1′,1′′-nitrilotris[2-propanol]
P-05-029502/08/0505/08/05Lubrizol Metalworking Additives(S) Anti-corrosion additive for metalworking fluids(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 1,1′-iminobis[2-propanol]
P-05-029602/08/0505/08/05Lubrizol Metalworking Additives(S) Anti-corrosion additive for metalworking fluids(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 2-(2-aminoethoxy)ethanol
P-05-029702/08/0505/08/05CBI(S) Polyurethane coating; polyurethane adhesive(G) Aqueous polyurethane dispersion
P-05-029802/08/0505/08/05CBI(G) Open, non-dispersive use(G) Styrene acrylate copolymer
P-05-029902/09/0505/09/05Zeon Chemicals L.P.(S) Automotive timing belts; oilfield wellhead seals, blow-out preventers(G) Modified acrylonitrile-butadiene polymer
P-05-030002/02/0505/02/05Reference Metals Company Inc.(G) Niobium precursor(G) Niobium organic compound
P-05-030102/08/0505/08/05CBI(G) Hardener for epoxy resin(G) Trisphenol
P-05-030202/08/0505/08/05Mitsubishi Gas Chemical America, Inc.(S) Reactant to form ingredient for use in ultra violet cured paint(S) 1,3-dioxane-2-ethanol, 5-ethyl-5-(hydroxymethyl)-.beta.,.beta.-dimethyl-
P-05-030302/08/0505/08/05CBI(G) Resin for coatings(G) Alkanoic acid, 3-hydroxy-2-(hydroxyalkyl)-2-alkyl-, ion(1-), salts with bisphenol a-bisphenol a-epichlorohydrin polymer 2-alkyl-1-alkanol-1-[(2-hydroxyalkyl)thio]-2-alkanol-tdi reaction products
P-05-030402/08/0505/08/05Mitsubishi Gas Chemical America, Inc.(S) Monomer for production of polymers(S) 2,4,8,10-tetraoxaspiro[5.5]undecane-3,9-diethanol, .beta.,.beta.,.beta.',.beta.'-tetramethyl-
P-05-030502/09/0505/09/05CBI(S) Isolated chemical intermediate precursor for the manufacture of casrn 390748-76-2, tall-oil pitch, sapond., neutralized, sterol-low(S) Tall-oil pitch, sapond., sterol-low
P-05-030602/10/0505/10/05Custom Synthesis, LLC(S) Additive for industrial and metalworking lubricants(G) Mixed fatty acids and diacids polymer with polyol
Start Printed Page 12483
P-05-030702/10/0505/10/05Materia Inc.(S) Catalyst(S) Ruthenium, [1,3-bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene]dichloro(phenylmethylene) (tricyclohexylphosphine)-, (sp-5-41)-
P-05-030802/10/0505/10/05Meadwestvaco Corporation - Specialty Chemicals Division(S) Support resin for printing inks(S) 2-propenoic acid, polymer with ethenylbenzene and (1-methylethenyl)benzene, compound with 2-aminoethanol
P-05-030902/11/0505/11/05Kuraray America, Inc.(S) Inkjet ink(S) 1,3-butanediol, 3-methyl-
P-05-031002/14/0505/14/05CBI(S) Resin for rubber(G) Olefin modified hydrocarbon resin
P-05-031102/14/0505/14/05CBI(S) Resin for rubber(G) Olefin modified hydrocarbon resin
P-05-031202/14/0505/14/05CBI(S) Resin for rubber(G) Olefin modified hydrocarbon resin
P-05-031302/14/0505/14/05CBI(S) Resin for rubber(G) Olefin modified hydrocarbon resin
P-05-031402/14/0505/14/05CBI(S) Resin for rubber(G) Olefin modified hydrocarbon resin
P-05-031502/14/0505/14/05CBI(S) Resin for rubber(G) Olefin modified hydrocarbon resin
P-05-031602/11/0505/11/05CBI(G) Additive, open, non-dispersive use(S) Siloxanes and silicones, di-methyl, 3-hydroxypropyl me, me octyl, ethoxylated
P-05-031702/14/0505/14/05CBI(G) Scale inhibitor for subterranean oilfield brines such as calcium carbonate and barium sulphate.(G) Mono-methyl maleate/acrylic acid/hydroxypropyl methacrylate copolymer ammonium salt
P-05-031802/14/0505/14/05CBI(G) Scale inhibitor for subterranean oilfield brines such as calcium carbonate and barium sulphate.(G) Mono-methyl maleate/acrylic acid/hydroxypropyl methacrylate sodium salt
P-05-031902/14/0505/14/05CBI(G) Scale inhibitor for subterranean oilfield brines such as calcium carbonate and barium sulphate.(G) Mono-methyl maleate/acrylic acid/hydroxypropyl methacrylate/sodium -p-sulphophenylmethallyl ether copolymer ammonium salt
P-05-032002/14/0505/14/05CBI(G) Scale inhibitor for subterranean oilfield brines such as calcium carbonate and barium sulphate.(G) Mono-methyl maleate/acrylic acid/hydroxypropyl methacrylate/2-propenoic acid,2-methyl-2(phosphonooxy)ethyl ester/2-propenoic acid, 2-methyl-phosphinicobis(oxy-2,1-ethanediyl ester copolymer ammonium salt
P-05-032102/14/0505/14/05CBI(G) Scale inhibitor for subterranean oilfield brines such as calcium carbonate and barium sulphate.(G) Mono-methyl maleate/acrylic acid/hydroxypropyl methacrylate copolymer
P-05-032202/14/0505/14/05CBI(G) The polymer will be used as an additive in detergent formulations.(G) Polyoxyethyene tristyrylphenyl ether methacrylate/methacrylic acid copolymer
P-05-032302/15/0505/15/05Incorez Corporation(S) 2 part protective coating(S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with 2-[(3-aminopropyl)amino]ethanol, dimethyl carbonate, 1,6-hexanediol, 1,1′-methylenebis[4-isocyanatocyclohexane] and 2-oxepanone, compound with n,n-diethylethanamine
P-05-032402/15/0505/15/05CBI(G) Paint component(G) Rare earth salt of a carboxylic acid
P-05-032502/16/0505/16/05E.I. Du pont De Nemours and Company, Inc.(S) Extruded film; powder coatings; composite tapes and prepregs; molded parts; molded shapes for machining(G) Thermoplastic polyimide
P-05-032602/16/0505/16/05Bio Based Chemical, LLC(S) As a polyol in elastomer formulations; as a polyol in flexible slab block and molding formulations; as a polyol in rigid foam formulations; as a polyol in coatings formulations; as a polyol in binder formulations; as polyol in adhesive formulations; as a polyol in sealant formulations(S) Soybean oil, reaction products with ethaneperoxoic acid
P-05-032702/17/0505/17/05CBI(G) Pigment dispersion polymer(G) Amine salt of styrene acrylic polymer
P-05-032802/17/0505/17/05International Specialty Products(S) Intermediate in the production of styleze w-20 / styleze w-10(S) 3-methacryloylaminopropyl-lauryl- dimethyl-ammonium chloride
Start Printed Page 12484
P-05-032902/18/0505/18/05Clariant LSM (America) Inc.(S) Fungicide intermediate(G) Halogenated phenoxy aromatic
P-05-033002/17/0505/17/05CBI(S) Coating for the leather industry(G) Carboxylic acid and ketone-functional polyurethane polymer, 2-dimethylaminoethyl salt
P-05-033102/17/0505/17/05International Specialty Products(S) Thickening of strong acids (oilfield drilling, toilet bowl cleaners, automatic dishwashing liquids)(S) 1-dodecanaminium, n,n-dimethyl-n-[3-[(2-methyl-1-oxo-2-propenyl)amino]propyl]-, chloride, polymer with n-[3-(dimethylamino)propyl]-2-methyl-2-propenamide and 1-ethenyl-2-pyrrolidinone
P-05-033202/18/0505/18/05CBI(S) Screen inks; flexo inks; plastic coatings; electronics(G) Acrylic oligomer
P-05-033302/18/0505/18/05CBI(S) Adhesives; coatings(G) Urethane acrylate
P-05-033402/18/0505/18/05SPI Pharma, Inc.(S) Destructive use as a processing aid(S) Aluminum hydroxycarbonate

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 2 Test Marketing Exemption Notices Received From: 01/20/05 to 02/18/05

T-05-000102/07/0503/23/05PPG Industries, Inc.(G) Component of an automotive refinish direct-gloss topcoat(G) Alkanediocic acid, polymer with 1,3,5-tris(substituted alkyl)-1,3,5-triazine-2,4,6(1h,3h,5h)-trione, alkanoate (ester) 3-substituted-2-(substituted alkyl)-2-alkanoate (ester)
T-05-000202/18/0504/03/05Forbo Adhesives, LLC(G) Liquid polyurethane adhesive(G) Isocyanate functional urethane polymer

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 30 Notices of Commencement From: 01/20/05 to 02/18/05

Case No.Received DateCommencement Notice End DateChemical
P-02-016102/16/0501/06/05(G) Copolymer
P-02-023801/25/0512/19/04(S) Pentadecane, branched
P-02-023901/25/0512/19/04(S) Hexadecane, branched
P-03-027202/01/0512/29/04(G) Olefins
P-03-034201/26/0501/11/05(G) Funtional alcohol, polymer with tdi, 2-hydroxymethyl acrylate-blocked
P-03-035801/26/0512/20/04(S) 1-chloro-4-propoxy thioxanthone
P-03-047102/15/0501/24/05(G) Bis oxetanyl ether
P-04-009102/08/0501/10/05(S) Carbamodithioic acid, dipentyl-, compound with n-pentyl-1-pentanamine (1:1)
P-04-027602/03/0501/19/05(G) Isobutene-maleic anhydride copolymer sodium salt
P-04-034602/02/0501/21/05(G) Copolymer of phenol and aromatic hydrocarbon
P-04-034702/02/0501/21/05(G) Copolymer of phenol and aromatic hydrocarbon
P-04-049102/15/0501/27/05(G) 1,3-isobenzofurandione, polymer with 2,5-furandione, oxybis[propanol] and 1,2-propanediol, 1 (or 2)-(2-methoxymethylethoxy)-alkyl ester
P-04-053002/14/0501/13/05(G) Chloromethylketone
P-04-076001/27/0501/20/05(G) Acrylic polymer
P-04-078702/11/0501/31/05(G) Polyether carboxylate
P-04-079102/11/0501/31/05(G) Polyether phosphonate
P-04-079501/21/0512/16/04(G) Isocyanate terminated urethane polymer
P-04-081602/03/0501/28/05(G) Disubstituted furanone
P-04-083602/10/0502/01/05(G) Substituted naphthalenesulfonic acid substituted azo phenyl amino triazin amino substituted phenyl compound
P-04-088002/11/0501/26/05(G) Carbomonocyclic carboxylic salt
P-04-088502/11/0501/24/05(G) Poly ester polyol
P-04-093301/28/0501/09/05(S) Silane, ethenyltriethoxy-, reaction products with wollastonite (ca(sio3))
Start Printed Page 12485
P-04-093601/28/0501/19/05(S) Silane, (3-chloropropyl)trimethoxy-, reaction products with wollastonite (ca(sio3))
P-04-093702/02/0501/06/05(G) Silsesquioxanes
P-04-094002/09/0501/25/05(G) Alkyl amine nitrile
P-04-094801/28/0501/01/05(G) Siloxane coating
P-05-001302/07/0501/08/05(S) Ethane, 1-ethoxy-2-(2-methoxyethoxy)-
P-05-003602/11/0502/07/05(G) Alkyl methacrylate copolymer
P-05-004702/17/0502/11/05(G) Stabilized aluminum alcoholate
P-96-159002/16/0504/14/03(G) Polysiloxane epoxy acrylate copolymer
Start List of Subjects

List of Subjects

End List of Subjects Start Signature

Dated: March 8, 2005.

Pamela M. Moseley,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

End Signature End Supplemental Information

[FR Doc. 05-4955 Filed 3-11-05; 8:45 am]

BILLING CODE 6560-50-S