Skip to Content

Notice

Certain Cut-to-Length Carbon-Quality Steel Plate from Indonesia: Final Results of Expedited Sunset Review

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On January 3, 2005, the Department of Commerce (“the Department”) initiated a sunset review of the countervailing duty order (“CVD”) on certain cut-to-length carbon-quality steel plate from Indonesia (70 FR 75) pursuant to section 751(c) of the Tariff Act of 1930, as amended (“the Act”). See Initiation of Five-year (“Sunset”) Reviews, 70 FR 75 (January 3, 2005). On the basis of a notice of intent to participate and an adequate substantive response filed on behalf of the domestic interested parties and inadequate response from respondent interested parties (in this case, no response), the Department conducted an expedited sunset review of this CVD order pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(B). As a result of this sunset review, the Department finds that revocation of the CVD order would be likely to lead to continuation or recurrence of a countervailable subsidy at the level indicated in the “Final Results of Review” section of this notice.

EFFECTIVE DATE:

August 8, 2005.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Tipten Troidl or David Goldberger, AD/CVD Operations, Office 3, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street & Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-1767 or (202) 482-4136, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Start Printed Page 45693

Background

On January 3, 2005, the Department initiated a sunset review of the CVD order on certain cut-to-length carbon-quality steel plate from Indonesia pursuant to section 751(c) of the Act. See Initiation of Five-year (“Sunset”) Reviews, 70 FR 75 (January 3, 2005). The Department received a Notice of Intent to Participate from the following domestic interested parties: Nucor Corporation (“Nucor”), International Steel Group Inc. (“ISG”), IPSCO Steel Inc. (“IPSCO”), and United States Steel Corporation (“U.S. Steel”) (collectively, “domestic interested parties”) within the deadline specified in 19 CFR 351.218(d)(1)(i). The domestic interested parties claimed interested party status under section 771(9)(C) of the Act.

The Department received a complete substantive response collectively from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(I). However, the Department did not receive a substantive response from any government or respondent interested party to this proceeding. As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), the Department conducted an expedited review of this CVD order.

On May 3, 2005, the Department published in the Federal Register an Extension of Final Results, extending the final results until August 1, 2005. See Certain Cut-to-Length Carbon-Quality Steel Plate from France, India, Indonesia, Italy, Japan and Korea; Extension of Final Results of Expedited Sunset Reviews of the Antidumping and Countervailing Duty Order, May 3, 2005 (70 FR 22843) (“Extension of Final Results”).

Scope of the Order

The products covered by the countervailing duty order are certain hot-rolled carbon- quality steel: (1) universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a nominal or actual thickness of not less than 4 mm, which are cut-to-length (not in coils) and without patterns in relief), of iron or non-alloy-quality steel; and (2) flat- rolled products, hot-rolled, of a nominal or actual thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are cut-to-length (not in coils).

Steel products to be included in this scope are of rectangular, square, circular or other shape and of rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process (i.e., products which have been “worked after rolling”)--for example, products which have been beveled or rounded at the edges. Steel products that meet the noted physical characteristics that are painted, varnished or coated with plastic or other non-metallic substances are included within this scope. Also, specifically included in this scope are high strength, low alloy (HSLA) steels. HSLA steels are recognized as steels with micro- alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum.

Steel products to be included in this scope, regardless of Harmonized Tariff Schedule of the United States (“HTSUS”) definitions, are products in which: (1) Iron predominates, by weight, over each of the other contained elements, (2) the carbon content is two percent or less, by weight, and (3) none of the elements listed below is equal to or exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, or 1.50 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.41 percent of titanium, or 0.15 percent of vanadium, or 0.15 percent zirconium. All products that meet the written physical description, and in which the chemistry quantities do not equal or exceed any one of the levels listed above, are within the scope of these investigations unless otherwise specifically excluded. The following products are specifically excluded from these investigations: (1) products clad, plated, or coated with metal, whether or not painted, varnished or coated with plastic or other non-metallic substances; (2) SAE grades (formerly AISI grades) of series 2300 and above; (3) products made to ASTM A710 and A736 or their proprietary equivalents; (4) abrasion- resistant steels (i.e., USS AR 400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, A517 grade S, or their proprietary equivalents; (6) ball bearing steels; (7) tool steels; and (8) silicon manganese steel or silicon electric steel. The merchandise subject to the order is currently classifiable in the HTSUS under subheadings: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.40.3050, 7225.40.7000, 7225.50.6000, 7225.99.0090, 7226.91.5000, 7226.91.7000, 7226.91.8000, 7226.99.0000.

Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this order is dispositive.

Analysis of Comments Received

All issues raised in this review are addressed in the Issues and Decision Memorandum (“Decision Memorandum”) from Barbara E. Tillman, Acting Deputy Assistant Secretary for Import Administration, to Joseph A. Spetrini, Acting Assistant Secretary for Import Administration, dated August 1, 2005, which is hereby adopted by this notice. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendation in this public memorandum which is on file in the Central Records Unit, room B-099 of the main Commerce building. In addition, a complete version of the Decision Memorandum can be accessed directly on the Web at http://ia.ita.doc.gov/​frn. The paper copy and electronic version of the Decision Memorandum are identical in content.

Final Results of Review

The Department determines that revocation of the CVD order would be likely to lead to continuation or recurrence of a countervailable subsidy at the rates listed below:

Producers/ExportersNet Countervailable Subsidy (percent)
P.T. Krakatau Steel47.72
All Others15.90

Notification Regarding Administrative Protective Order

This notice serves as the only reminder to parties subject to administrative protective order (“APO”) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

We are issuing and publishing the results and notice in accordance with Start Printed Page 45694sections 751(c), 752, and 777(i)(1) of the Act.

Start Signature

Dated: August 1, 2005.

Joseph A. Spetrini,

Acting Assistant Secretary for Import Administration.

End Signature End Supplemental Information

[FR Doc. E5-4258 Filed 8-5-05; 8:45 am]

BILLING CODE 3510-DS-S