Cooper Tire & Rubber Company (Cooper) has determined that certain tires it manufactured during 2004 and 2005 do not comply with S6.5(f) of Federal Motor Vehicle Safety Standard (FMVSS) No. 119, “New pneumatic tires for vehicles other than passenger cars.” Pursuant to 49 U.S.C. 30118(d) and 30120(h), Cooper has petitioned for a determination that this noncompliance is inconsequential to motor vehicle safety and has filed an appropriate report pursuant to 49 CFR part 573, “Defect and Noncompliance Reports.” Notice of receipt of a petition was published, with a 30-day comment period, on July 29, 2005 in the Federal Register (70 FR 43935). NHTSA received no comments.
Cooper produced approximately 195 Power King brand tires during the period from May 15, 2005 through May 21, 2005 that do not comply with FMVSS No. 119, S6.5(f). S6.5(f) of FMVSS No. 119 requires that each tire shall be marked with “[t]he actual number of plies * * * in the sidewall and, if different, in the tread area.” The noncompliant tires were marked “tread 2 ply steel + 2 ply polyester; sidewall 2 ply polyester.” The correct marking should read “tread 1 ply nylon, 2 ply steel + 2 ply polyester; sidewall 2 ply polyester.”
Cooper believes that the noncompliance is inconsequential to motor vehicle safety and that no corrective action is warranted. Cooper states that “the incorrect number of tread plies on each tire does not present a safety-related defect. In addition to having the number of tread plies marked on the sidewall, the subject tires have an additional nylon tread ply.” Cooper states that the tires comply with all other requirements of FMVSS No. 119.
The Transportation Recall, Enhancement, Accountability, and Documentation (TREAD) Act (Pub. L. 106-414) required, among other things, that the agency initiate rulemaking to improve tire label information. In response, the agency published an Advance Notice of Proposed Rulemaking (ANPRM) in the Federal Register on December 1, 2000 (65 FR 75222).
The agency received more than 20 comments on the tire labeling information required by 49 CFR Sections 571.109 and 119, Part 567, Part 574, and Part 575. In addition, the agency conducted a series of focus groups, as required by the TREAD Act, to examine consumer perceptions and understanding of tire labeling. Few of the focus group participants had knowledge of tire labeling beyond the tire brand name, tire size, and tire pressure.
Based on the information obtained from comments to the ANPRM and the consumer focus groups, we have concluded that it is likely that few consumers have been influenced by the tire construction information (number of plies and cord material in the sidewall and tread plies) provided on the tire label when deciding to buy a motor vehicle or tire.
Therefore, the agency agrees with Cooper's statement that the incorrect markings in this case do not present a serious safety concern. There is no effect of the noncompliance on the operational safety of vehicles on which these tires are mounted. In the agency's judgment, the incorrect labeling of the tire construction information will have an inconsequential effect on motor vehicle safety because most consumers do not base tire purchases or vehicle Start Printed Page 53713operation parameters on the number of plies in the tire. In addition, the tires are certified to meet all the performance requirements of FMVSS No. 119 and all other informational markings as required by FMVSS No. 119 are present. Cooper has corrected the problem.
In consideration of the foregoing, NHTSA has decided that the petitioner has met its burden of persuasion that the noncompliance described is inconsequential to motor vehicle safety. Accordingly, Cooper's petition is granted and the petitioner is exempted from the obligation of providing notification of, and a remedy for, the noncompliance.
(Authority: 49 U.S.C. 30118, 30120; delegations of authority at CFR 1.50 and 501.8)Start Signature
Issued on: September 2, 2005.
Ronald L. Medford,
Senior Associate Administrator for Vehicle Safety.
1. This decision is limited to its specific facts. As some commenters on the ANPRM noted, the existence of steel in a tire's sidewall can be relevant to the manner in which it should be repaired or retreaded.Back to Citation
[FR Doc. 05-17906 Filed 9-8-05; 8:45 am]
BILLING CODE 4910-59-P