Import Administration, International Trade Administration, Department of Commerce.
The Department of Commerce (the Department) has determined, pursuant to section 751(b) of the Tariff Act of 1930, as amended (the Act), that Produits Forestiers Arbec Inc. (Arbec) is the successor-in-interest to Uniforêt Inc. (Uniforêt) and, as a result, should be accorded the same treatment previously accorded to Uniforêt in regard to the antidumping order on certain softwood lumber products from Canada as of the date of publication of this notice in the Federal Register.
October 13, 2005.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Saliha Loucif or Constance Handley, at (202) 482-1779 or (202) 482-0631, respectively; AD/CVD Operations, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street & Constitution Avenue, NW, Washington, DC 20230.End Further Info End Preamble Start Supplemental Information
On June 29, 2005, Uniforêt requested that the Department initiate and conduct an expedited changed circumstances review, in accordance with section 751(b) of the Act and sections 351.216(b) and 351.221(c)(3) of the Department's regulations, to confirm that Arbec is the successor-in-interest to Uniforêt. On August 26, 2005, the Department initiated this review and simultaneously issued its preliminary results that Arbec is the successor-in-interest to Uniforêt and should receive Uniforêt's cash deposit rate of 11.54 percent. See Notice of Initiation and Preliminary Results of Antidumping Duty Changed Circumstances Review: Certain Softwood Lumber Products from Canada, 70 FR 50299 (August 26, 2005) (Preliminary Results). This rate reflects the “all others” rate from the investigation as modified in the Notice of Determination Under Section 129 of the Uruguay Round Agreements Act: Antidumping Measures on Certain Softwood Lumber Products From Canada, 70 FR 22636 (May 2, 2005).
In the Preliminary Results, we stated that interested parties could request a hearing or submit case briefs and/or written comments to the Department no later than 30 days after publication of the Preliminary Results notice in the Federal Register, and submit rebuttal briefs, limited to the issues raised in those case briefs, seven days subsequent to the due date of the case briefs. We did not receive any hearing requests, case or rebuttal briefs, or comments on the Preliminary Results.
Scope of the Order
The products covered by this order are softwood lumber, flooring and siding (softwood lumber products). Softwood lumber products include all products classified under headings 4407.1000, 4409.1010, 4409.1090, and 4409.1020, respectively, of the Harmonized Tariff Schedule of the United States (HTSUS), and any softwood lumber, flooring and siding described below. These softwood lumber products include:
(1) coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding six millimeters;
(2) coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed;
(3) other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or finger-jointed; and
(4) coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed.
Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise under review is dispositive.
Softwood lumber products excluded from the scope:
- trusses and truss kits, properly classified under HTSUS 4418.90
- I-joist beams
- assembled box spring frames
- pallets and pallet kits, properly classified under HTSUS 4415.20
- garage doors
- edge-glued wood, properly classified under HTSUS 4422.214.171.124 (formerly HTSUS 44126.96.36.199)
- properly classified complete door frames
- properly classified complete window frames
- properly classified furniture
Softwood lumber products excluded from the scope only if they meet certain requirements:
- Stringers (pallet components used for runners): if they have at least two notches on the side, positioned at equal distance from the center, to properly accommodate forklift blades, properly classified under HTSUS 44188.8.131.52 (formerly HTSUS 44184.108.40.206)
- Box-spring frame kits: if they contain the following wooden pieces - two side rails, two end (or top) rails and varying numbers of slats. The side rails and the end rails should be radius-cut at both ends. The kits should be individually packaged, they should contain the exact number of wooden components needed to make a particular box-spring frame, with no further processing required. None of the components exceeds 1” in actual thickness or 83” in length.
- Radius-cut box-spring-frame components, not exceeding 1” in actual thickness or 83” in length, ready for assembly without further processing. The radius cuts must be present on both ends of the boards and must be substantial cuts so as to completely round one corner.
- Fence pickets requiring no further processing and properly classified under HTSUS 4421.90.70, 1” or less in actual thickness, up to 8” wide, 6' or less in length, and have finials or decorative cuttings that clearly identify them as fence pickets. In the case of dog-eared fence pickets, the corners of the boards should be cut off so as to remove pieces of wood in the shape of isosceles right angle triangles with sides measuring 3/4 inch or more. Start Printed Page 59722
- U.S. origin lumber shipped to Canada for minor processing and imported into the United States, is excluded from the scope of this order if the following conditions are met: 1) the processing occurring in Canada is limited to kiln-drying, planing to create smooth-to-size board, and sanding; and 2) if the importer establishes to U.S. Customs and Border Protections's (CBP) satisfaction that the lumber is of U.S. origin.
- Softwood lumber products contained in single family home packages or kits,1 regardless of tariff classification, are excluded from the scope of this order if the following criteria are met:
(A) The imported home package or kit constitutes a full package of the number of wooden pieces specified in the plan, design or blueprint necessary to produce a home of at least 700 square feet produced to a specified plan, design or blueprint;
(B) The package or kit must contain all necessary internal and external doors and windows, nails, screws, glue, subfloor, sheathing, beams, posts, connectors and if included in purchase contract decking, trim, drywall and roof shingles specified in the plan, design or blueprint;
(C) Prior to importation, the package or kit must be sold to a retailer of complete home packages or kits pursuant to a valid purchase contract referencing the particular home design plan or blueprint, and signed by a customer not affiliated with the importer;
(D) The whole package must be imported under a single consolidated entry when permitted by CBP, whether or not on a single or multiple trucks, rail cars or other vehicles, which shall be on the same day except when the home is over 2,000 square feet;
(E) The following documentation must be included with the entry documents:
- a copy of the appropriate home design, plan, or blueprint matching the entry;
- a purchase contract from a retailer of home kits or packages signed by a customer not affiliated with the importer;
- a listing of inventory of all parts of the package or kit being entered that conforms to the home design package being entered;
- in the case of multiple shipments on the same contract, all items listed immediately above which are included in the present shipment shall be identified as well.
We have determined that the excluded products listed above are outside the scope of this order, provided the specified conditions are met. Lumber products that CBP may classify as stringers, radius cut box-spring-frame components, and fence pickets, not conforming to the above requirements, as well as truss components, pallet components, and door and window frame parts, are covered under the scope of this order and may be classified under HTSUS subheadings 44220.127.116.11, 4418.104.22.168, and 4422.214.171.124. Due to changes in the 2002 HTSUS whereby subheading 44126.96.36.199 and 44188.8.131.52 were changed to 44184.108.40.206 and 44220.127.116.11, respectively, we are adding these subheadings as well.
In addition, this scope language has been further clarified to now specify that all softwood lumber products entered from Canada claiming non-subject status based on U.S. country of origin will be treated as non-subject U.S.-origin merchandise under the antidumping and countervailing duty orders, provided that these softwood lumber products meet the following condition: upon entry, the importer, exporter, Canadian processor and/or original U.S. producer establish to CBP's satisfaction that the softwood lumber entered and documented as U.S.-origin softwood lumber was first produced in the United States as a lumber product satisfying the physical parameters of the softwood lumber scope.2 The presumption of non-subject status can, however, be rebutted by evidence demonstrating that the merchandise was substantially transformed in Canada.
Final Results of Changed Circumstances Review
Based on the information provided by Arbec, and the fact that the Department did not receive any comments during the comment period following the preliminary results of this review, the Department hereby determines that Arbec is the successor-in-interest to Uniforêt for antidumping duty cash deposit purposes.
Instructions to U.S. Customs and Border Protection
Because both Arbec and Uniforêt are currently subject to the “all others” rate, there is no need to send instructions to CBP at this time. However, Uniforêt is currently participating in the second administrative review and will receive the “review-specific rate” once this review is completed. Thus, once the final results for the second administrative review are issued, the Department will instruct CBP to suspend liquidation of all shipments of the subject merchandise produced and exported by Arbec at the rate determined for Uniforêt.
This notice also serves as a reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.306. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
This notice is in accordance with sections 751(b) and 777(i)(1) of the Act, and section 351.216(e) of the Department's regulations.Start Signature
Dated: October 6, 2005.
Joseph A. Spetrini,
Acting Assistant Secretary for Import Administration.
1. To ensure administrability, we clarified the language of this exclusion to require an importer certification and to permit single or multiple entries on multiple days. We also instructed importers to retain and make available for inspection specific documentation in support of each entry.Back to Citation
2. See the scope clarification message (3034202), dated February 3, 2003, to CBP, regarding treatment of U.S.-origin lumber on file in the Central Records Unit, Room B-099 of the main Commerce Building.Back to Citation
[FR Doc. E5-5601 Filed 10-12-05; 8:45 am]
BILLING CODE 3510-DS-S