Import Administration, International Trade Administration, Department of Commerce.
On May 12, 2006, the Department of Commerce (the Department) published a notice of initiation and preliminary results of its changed circumstances review of the antidumping duty order on stainless steel sheet and strip in coils (SSSSC) from the Republic of Korea (Korea). See Notice of Initiation and Preliminary Results of Changed Circumstances Antidumping Duty Review: Stainless Steel Sheet and Strip in Coils from the Republic of Korea, 71 FR 27680 (May 12, 2006) (Preliminary Results). We have now completed that review. For these final results, as in the Preliminary Results, we determine that: 1) Hyundai Steel Company (Hyundai) is the successor-in-interest to INI Steel Company (INI), formerly Inchon Iron and Steel Co., Ltd. (Inchon), a respondent in the less-than-fair-value (LTFV) investigation; and 2) SSSSC produced and exported by Hyundai should be excluded from the antidumping duty order.
March 10, 2006Start Further Info
FOR FURTHER INFORMATION CONTACT:
Irina Itkin or Brianne Riker, AD/CVD Operations, Office 2, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone (202) 482-0656 and (202) 482-0629, respectively.End Further Info End Preamble Start Supplemental Information
On July 27, 1999, the Department published in the Federal Register (64 FR 40555) the antidumping duty order on SSSSC from Korea. Inchon was excluded from the order because its dumping margin was de minimis in the LTFV investigation. In 2001, INI requested that the Department conduct a changed circumstances review to confirm that INI was the successor-in-interest to Inchon. On June 28, 2002, the Department found that INI was the successor-in-interest to Inchon and that INI should be excluded from the antidumping duty order on SSSSC from Start Printed Page 37907Korea consistent with the exclusion determination for Inchon in the LTFV investigation. See Stainless Steel Sheet and Strip in Coils from the Republic of Korea: Notice of Final Results of Changed Circumstances Antidumping Duty Administrative Review, 67 FR 43583 (June 28, 2002).
On March 22, 2006, Hyundai submitted a written request that the Department conduct a changed circumstances review to confirm that Hyundai is the successor-in-interest to INI and that subject merchandise produced by this entity should not be subject to antidumping duties.
On May 12, 2006, the Department published a notice of initiation and preliminary results of its changed circumstances review of the antidumping duty order on SSSSC from Korea. See Preliminary Results. In that determination, we preliminarily found that Hyundai is the successor-in-interest to INI. Interested parties were invited to comment on the preliminary results. No party submitted comments.
Scope of Order
The products covered are certain stainless steel sheet and strip in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 millimeters in width and less than 4.75 millimeters in thickness, and that is annealed or otherwise heat treated and pickled or otherwise descaled. The subject sheet and strip may also be further processed (e.g., cold-rolled, polished, aluminized, coated, etc.) provided that it maintains the specific dimensions of sheet and strip following such processing.
The merchandise subject to this order is classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 7219.13.0031, 7219.13.0051, 7219.13.0071, 7219.1300.81,1 7219.14.0030, 7219.14.0065, 7219.14.0090, 7219.32.0005, 7219.32.0020, 7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0038, 7219.32.0042, 7219.32.0044, 7219.33.0005, 7219.33.0020, 7219.33.0025, 7219.33.0035, 7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0044, 7219.34.0005, 7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 7219.35.0005, 7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.90.0010, 7219.90.0020, 7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.12.1000, 7220.12.5000, 7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 7220.20.6005, 7220.20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 7220.20.7005, 7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 7220.20.8000, 7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 7220.90.0060, and 7220.90.0080. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise subject to the order is dispositive.
Excluded from the scope of this order are the following: 1) sheet and strip that is not annealed or otherwise heat treated and pickled or otherwise descaled; 2) sheet and strip that is cut to length; 3) plate (i.e., flat-rolled stainless steel products of a thickness of 4.75 millimeters or more); 4) flat wire (i.e., cold-rolled sections, with a prepared edge, rectangular in shape, of a width of not more than 9.5 millimeters); and 5) razor blade steel. Razor blade steel is a flat-rolled product of stainless steel, not further worked than cold-rolled (cold- reduced), in coils, of a width of not more than 23 millimeters and a thickness of 0.266 millimeters or less, containing, by weight, 12.5 to 14.5 percent chromium, and certified at the time of entry to be used in the manufacture of razor blades. See Chapter 72 of the HTSUS, “Additional U.S. Note” 1(d).
Flapper valve steel is also excluded from the scope. Flapper valve steel is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, 8 ksi, and a hardness (Hv) of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors.
Also excluded is a product referred to as suspension foil, a specialty steel product that is used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 millimeters, and with a mass of 225 kilograms or less. Roll marks may only be visible on one side, with no scratches of measurable depth. The material must exhibit residual stresses of two millimeter depth. The material must exhibit residual stresses of two millimeters maximum deflection, and flatness of 1.6 millimeters over 685 millimeters length.
Certain stainless steel foil for automotive catalytic converters is also excluded from the scope of this order. This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than one percent, manganese of no more than one percent, chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002 or greater than 0.05 percent, and total rare earth elements of more than 0.06 percent, with the balance iron.
Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope of this order. This ductile stainless steel strip contains, by weight, 26 to 30 percent chromium, and seven to 10 percent cobalt, with the remainder of iron, in widths 228.6 millimeters or less, and a thickness between 0.127 and 1.270 millimeters. It exhibits magnetic remanence between 9,000 and 12,000 gauss, and a coercivity of between 50 and 300 oersteds. This product is most commonly used in electronic sensors and is currently available under proprietary trade names such as “Arnokrome III.”2
Certain electrical resistance alloy steel is also excluded from the scope of this order. This product is defined as a non-magnetic stainless steel manufactured to American Society of Testing and Materials specification B344 and containing, by weight, 36 percent Start Printed Page 37908nickel, 18 percent chromium, and 46 percent iron, and is most notable for its resistance to high temperature corrosion. It has a melting point of 1,390 degrees Celsius and displays a creep rupture limit of four kilograms per square millimeter at 1,000 degrees Celsius. This steel is most commonly used in the production of heating ribbons for circuit breakers and industrial furnaces, and in rheostats for railway locomotives. The product is currently available under proprietary trade names such as “Gilphy 36.”3
Certain martensitic precipitation-hardenable stainless steel is also excluded from the scope of this order. This high-strength, ductile stainless steel product is designated under the Unified Numbering System as S45500-grade steel, and contains, by weight, 11 to 13 percent chromium, and seven to 10 percent nickel. Carbon, manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has copper, niobium, and titanium added to achieve aging, and will exhibit yield strengths as high as 1,700 Mpa and ultimate tensile strengths as high as 1,750 Mpa after aging, with elongation percentages of 3 percent or less in 50 millimeters. It is generally provided in thicknesses between 0.635 and 0.787 millimeters, and in widths of 25.4 millimeters. This product is most commonly used in the manufacture of television tubes and is currently available under proprietary trade names such as “Durphynox 17.”4
Finally, three specialty stainless steels typically used in certain industrial blades and surgical and medical instruments are also excluded from the scope of this order. These include stainless steel strip in coils used in the production of textile cutting tools (e.g., carpet knives).5 This steel is similar to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less, and includes between 0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. This steel is sold under proprietary names such as “GIN4 Mo.” The second excluded stainless steel strip in coils is similar to AISI 420-J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of no more than 0.025 percent, and sulfur of no more than 0.020 percent. This steel has a carbide density on average of 100 carbide particles per 100 square microns. An example of this product is “GIN5” steel. The third specialty steel has a chemical composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 percent, phosphorus of no more than 0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This product is supplied with a hardness of more than Hv 500 guaranteed after customer processing, and is supplied as, for example, “GIN6.”
Final Results of Review
Based on our analysis in the Preliminary Results, we find that Hyundai is the successor-in-interest to INI. Based on evidence on the record, we find that Hyundai's organizational structure, management, production facilities, supplier relationships, and customers have remained essentially unchanged since its name change from INI. Further, we find that Hyundai operates as the same business entity as INI. Because INI is excluded from the antidumping duty order on SSSSC from Korea, we will apply this determination retroactively and will instruct U.S. Customs and Border Protection to liquidate, without regard to antidumping duties, all unliquidated entries of subject merchandise produced and exported by Hyundai, and entered, or withdrawn from warehouse, for consumption on or after March 10, 2006, the date of INI's name change to Hyundai, in accordance with past precedent. See Stainless Steel Wire Rod from Italy: Notice of Final Results of Changed Circumstances Antidumping Duty Review, 71 FR 24643 (Apr. 26, 2006); Certain Hot-Rolled Lead and Bismuth Carbon Steel Products from the United Kingdom: Final Results of Changed-Circumstances Antidumping and Countervailing Duty Administrative Reviews, 64 FR 66880 (Nov. 30, 1999).
This notice also serves as a final reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 352.305(a)(3). Timely notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
This determination and notice are issued and published in accordance with sections 751(b)(1) and 777(i)(1) of the Tariff Act of 1930, as amended, and 19 CFR 351.216.Start Signature
Dated: June 27, 2006.
David M. Spooner,
Assistant Secretary for Import Administration.
1. Due to changes to the HTSUS numbers in 2001, 7219.13.0030, 7219.13.0050, 7219.13.0070, and 7219.13.0080 are now 7219.13.0031, 7219.13.0051, 7219.13.0071, and 7219.13.0081, respectively.Back to Citation
2. “Arnokrome III” is a trademark of the Arnold Engineering Company.Back to Citation
3. “Gilphy 36” is a trademark of Imphy, S.A.Back to Citation
4. “Durphynox 17” is a trademark of Imphy, S.A.Back to Citation
5. This list of uses is illustrative and provided for descriptive purposes only.Back to Citation
[FR Doc. E6-10387 Filed 6-30-06; 8:45 am]
BILLING CODE 3510-DS-S