Import Administration, International Trade Administration, Department of Commerce.
In response to a request from Taiga Building Products Ltd., the Department of Commerce is initiating a changed circumstances review of the antidumping duty order on Certain Softwood Lumber Products from Canada.
July 13, 2006.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Saliha Loucif or Constance Handley, AD/CVD Operations, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-1779 or (202) 482-0631, respectively.End Further Info End Preamble Start Supplemental Information
On May 22, 2002, the Department issued the antidumping duty order on Certain Softwood Lumber Products from Canada. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Certain Softwood Lumber Products From Canada, 67 FR 36067 (May 22, 2002). On June 14, 2006, Taiga Building Products Ltd. requested that the Department of Commerce (the Department) conduct a changed circumstances review, stating that it changed its name to Taiga Building Products Ltd. from Taiga Forest Products on January 6, 2006, and providing supporting documentation. In accordance with sections 351.216 and 351.221of the Department's regulations, the Department is initiating this review to confirm whether Taiga Building Products Ltd. is the successor-in-interest to Taiga Forest Products.
Scope of the Order
The products covered by this order are softwood lumber, flooring and siding (softwood lumber products). Softwood lumber products include all products classified under subheadings 4407.1000, 4409.1010, 4409.1090, and 4409.1020, respectively, of the Harmonized Tariff Schedule of the United States (HTSUS), and any softwood lumber, flooring and siding described below. These softwood lumber products include:
(1) Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding six millimeters;
(2) Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed;
(3) Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces (other than wood mouldings and wood dowel rods) whether or not planed, sanded or finger-jointed; and
(4) Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed.
Although the HTSUS subheadings are provided for convenience and U.S. Customs purposes, the written description of the merchandise subject to this order is dispositive.
As specifically stated in the Issues and Decision Memorandum accompanying the Notice of Final Determination of Sales at Less Than Fair Value: Certain Softwood Lumber Products from Canada, 67 FR 15539 (April 2, 2002) (see comment 53, item D, page 116, and comment 57, item B-7, page 126), available at www.ia.ita.doc.gov/frn, drilled and notched lumber and angle cut lumber are covered by the scope of this order.
The following softwood lumber products are excluded from the scope of Start Printed Page 39662this order provided they meet the specified requirements detailed below:
(1) Stringers (pallet components used for runners): if they have at least two notches on the side, positioned at equal distance from the center, to properly accommodate forklift blades, properly classified under HTSUS 4418.104.22.168.
(2) Box-spring frame kits: if they contain the following wooden pieces - two side rails, two end (or top) rails and varying numbers of slats. The side rails and the end rails should be radius-cut at both ends. The kits should be individually packaged, they should contain the exact number of wooden components needed to make a particular box spring frame, with no further processing required. None of the components exceeds 1” in actual thickness or 83” in length.
(3) Radius-cut box-spring-frame components, not exceeding 1” in actual thickness or 83” in length, ready for assembly without further processing. The radius cuts must be present on both ends of the boards and must be substantial cuts so as to completely round one corner.
(4) Fence pickets requiring no further processing and properly classified under HTSUS 4421.90.70, 1” or less in actual thickness, up to 8” wide, 6' or less in length, and have finials or decorative cuttings that clearly identify them as fence pickets. In the case of dog-eared fence pickets, the corners of the boards should be cut off so as to remove pieces of wood in the shape of isosceles right angle triangles with sides measuring 3/4 inch or more.
(5) U.S. origin lumber shipped to Canada for minor processing and imported into the United States, is excluded from the scope of this order if the following conditions are met: 1) the processing occurring in Canada is limited to kiln-drying, planing to create smooth-to-size board, and sanding, and 2) if the importer establishes to the satisfaction of CBP that the lumber is of U.S. origin.
(6) Softwood lumber products contained in single family home packages or kits1, regardless of tariff classification, are excluded from the scope of this order if the importer certifies to items 6 A, B, C, D, and requirement 6 E is met:
A. The imported home package or kit constitutes a full package of the number of wooden pieces specified in the plan, design or blueprint necessary to produce a home of at least 700 square feet produced to a specified plan, design or blueprint;
B. The package or kit must contain all necessary internal and external doors and windows, nails, screws, glue, sub floor, sheathing, beams, posts, connectors, and if included in the purchase contract, decking, trim, drywall and roof shingles specified in the plan, design or blueprint;
C. Prior to importation, the package or kit must be sold to a retailer of complete home packages or kits pursuant to a valid purchase contract referencing the particular home design plan or blueprint, and signed by a customer not affiliated with the importer;
D. Softwood lumber products entered as part of a single family home package or kit, whether in a single entry or multiple entries on multiple days, will be used solely for the construction of the single family home specified by the home design matching the entry.
E. For each entry, the following documentation must be retained by the importer and made available to CBP upon request:
i. A copy of the appropriate home design, plan, or blueprint matching the entry;
ii. A purchase contract from a retailer of home kits or packages signed by a customer not affiliated with the importer;
iii. A listing of inventory of all parts of the package or kit being entered that conforms to the home design package being entered;
iv. In the case of multiple shipments on the same contract, all items listed in E(iii) which are included in the present shipment shall be identified as well.
Lumber products that CBP may classify as stringers, radius cut box-spring-frame components, and fence pickets, not conforming to the above requirements, as well as truss components, pallet components, and door and window frame parts, are covered under the scope of this order and may be classified under HTSUS subheadings 4422.214.171.124, 44126.96.36.199, and 44188.8.131.52.
Finally, as clarified throughout the course of the investigation, the following products, previously identified as Group A, remain outside the scope of this order. They are:
1. Trusses and truss kits, properly classified under HTSUS 4418.90;
2. I-joist beams;
3. Assembled box spring frames;
4. Pallets and pallet kits, properly classified under HTSUS 4415.20;
5. Garage doors;
6. Edge-glued wood, properly classified under HTSUS 44184.108.40.206;
7. Properly classified complete door frames;
8. Properly classified complete window frames; and
9. Properly classified furniture.
In addition, this scope language was further clarified to specify that all softwood lumber products entered from Canada claiming non-subject status based on U.S. country of origin will be treated as non-subject U.S.-origin merchandise under the countervailing duty order, provided that these softwood lumber products meet the following condition: upon entry, the importer, exporter, Canadian processor and/or original U.S. producer establish to CBP's satisfaction that the softwood lumber entered and documented as U.S.-origin softwood lumber was first produced in the United States as a lumber product satisfying the physical parameters of the softwood lumber scope.2 The presumption of non-subject status can, however, be rebutted by evidence demonstrating that the merchandise was substantially transformed in Canada.
On March 3, 2006, the Department issued a scope ruling that any product entering under HTSUS 4409.10.05 which is continually shaped along its end and/or side edges which otherwise conforms to the written definition of the scope is within the scope of the order.3
Pursuant to section 751(b)(1) of the Tariff Act of 1930, as amended (the Act), the Department will conduct a changed circumstances review upon receipt of a request from an interested party for a review of an antidumping duty order which shows changed circumstances sufficient to warrant a review of the antidumping order. As indicated in the Background section, we have received information indicating that Taiga Forest Start Printed Page 39663Products has changed its name to Taiga Building Products Ltd. This constitutes changed circumstances warranting a review of the order. Therefore, in accordance with section 751(b)(1) of the Act, we are initiating a changed circumstances review based upon the information contained in Taiga Building Products Ltd.'s submission.
In making successor-in-interest determinations, the Department examines several factors including, but not limited to, changes in: (1) management; (2) production facilities; (3) supplier relationships; and (4) customer base. See, e.g., Polychloroprene Rubber from Japan: Final Results of Changed Circumstances Review, 67 FR 58 (January 2, 2002) (citing Brass Sheet and Strip from Canada: Notice of Final Results of Antidumping Duty Administrative Review, 57 FR 20460 (May 13, 1992)). While no single factor, or combination of factors, will necessarily prove dispositive, the Department will generally consider the new company to be the successor to its predecessor company if the resulting operations are essentially the same as the predecessor company. See, e.g., citing, Industrial Phosphoric Acid from Israel; Final Results of Changed Circumstances Review, 59 FR 6944, 6945 (February 14, 1994). Thus, if the evidence demonstrates that, with respect to the production and sale of the subject merchandise, the new company operates as the same business entity as its predecessor, the Department will assign the new company the cash-deposit rate of its predecessor.
In its June 14, 2006, submission, Taiga Building Products Ltd. argues that it changed its name to Taiga Building Products Ltd. from Taiga Forest Products, and that the company's ownership, senior management, operations, supplier/customer relationships, and facilities have not changed. As such, Taiga Building Products Ltd. is, for all intents and purposes, operating in the exact same manner as Taiga Forest Products. To support its claims, Taiga Building Products Ltd. submitted documentation, including: (1) a name change registration form; (2) a Certificate of Amalgamation issued by the Government of British Columbia; (3) a sample letter from Taiga Building Products Ltd. to its customers; and (4) Taiga Building Products Ltd.'s annual report to shareholders for the fiscal year ending March 31, 2006.
After the initiation of the review, the Department will issue a questionnaire requesting additional factual information for the review in accordance with 19 CFR 351.221(b)(2). The Department will publish in the Federal Register a notice of preliminary results of changed circumstances review which will set forth the factual and legal conclusions upon which our preliminary results are based, and a description of any action proposed based on those results in accordance with 19 CFR 351.221(b)(4) and 19 CFR 351.221(c)(3)(i). Pursuant to 19 CFR 351.221(b)(4)(ii), interested parties will have an opportunity to comment on the preliminary results of the review. The Department will issue its final results of review within 270 days after the date on which the changed circumstances review is initiated, in accordance with 19 CFR 351.216(e), and will publish these results in the Federal Register.
The current requirement for a cash deposit of estimated antidumping duties on all subject merchandise will continue unless and until it is modified pursuant to the final results of this changed circumstances review.
This notice is in accordance with section 751(b)(1) of the Act and 19 CFR 351.216 and 351.221 of the Department's regulations.Start Signature
Dated: July 7, 2006.
Joseph A. Spetrini,
Acting Assistant Secretary for Import Administration.
1. To ensure administrability, we clarified the language of exclusion number 6 to require an importer certification and to permit single or multiple entries on multiple days as well as instructing importers to retain and make available for inspection specific documentation in support of each entry.Back to Citation
2. See the scope clarification message (# 3034202), dated February 3, 2003, to CBP, regarding treatment of U.S. origin lumber on file in Room B-099 of the Central Records Unit (CRU) of the Main Commerce Building.Back to Citation
3. See Memorandum from Constance Handley, Program Manager, to Stephen J. Claeys, Deputy Assistant Secretary regarding Scope Request by the Petitioner Regarding Entries Made Under HTSUS 4409.10.05, dated March 3, 2006.Back to Citation
[FR Doc. E6-11059 Filed 7-12-03; 8:45 am]
BILLING CODE 3510-DS-S