Import Administration, International Trade Administration, Department of Commerce.
After the Department of Commerce (the Department) initiated a review of the antidumping duty order on certain hot-rolled carbon steel flat products (HRS) from India covering the period December 1, 2004, through November 30, 2005 (the period of review or POR), the sole respondent, Essar Steel Ltd. (Essar), claimed it did not ship subject merchandise to the United States during the POR. The Department is now rescinding this review based on record evidence consistent with Essar's no shipments claim.
October 16, 2006.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Jeffrey Pedersen or Howard Smith, AD/CVD Operations, Office 4, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230, telephone: (202) 482-2769 or (202) 482-5193, respectively.End Further Info End Preamble Start Supplemental Information
On December 1, 2005, the Department published, in the Federal Register, a notice of the opportunity to request an administrative review of the antidumping duty order on HRS from India, covering the period December 1, 2004, through November 30, 2005. See Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity to Request Administrative Review, 70 FR 72109 (December 1, 2005). On December 30, 2005 and January 3, 2006, Nucor Corporation and U.S. Steel Corporation (collectively, petitioners), respectively, requested an administrative review of the above-referenced antidumping order with respect to Essar. On February 1, 2006, the Department initiated the requested administrative review. See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for Revocation in Part, 71 FR 5241 (February 1, 2006). On February 10, 2006, Essar submitted a letter to the Department in which it certified that it made no shipments of subject merchandise to the United States during the POR.
On July 14, 2006, the Department published notification of its intent to rescind the instant review in the Federal Register. See Certain Hot-Rolled Carbon Steel Flat Products From India: Notice of Intent to Rescind Administrative Review, 71 FR 40068 (July 14, 2006) (Intent to Rescind). The Department stated in that notice that it intended to rescind the instant administrative review of Essar because U.S. Customs and Border Protection (CBP) data supported the conclusion that there were no entries, exports, or sales of subject merchandise from Essar. The Department provided interested parties an opportunity to comment on the rescission and received no comments.
Scope of the Order
The products covered by the antidumping duty order are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with Start Printed Page 60690plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths, of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of the order.
Specifically included within the scope of the order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products to be included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: i) iron predominates, by weight, over each of the other contained elements; ii) the carbon content is 2 percent or less, by weight; and iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of the order unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of the order:
- Alloy HRS products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506).
- Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher.
- Ball bearing steels, as defined in the HTSUS.
- Tool steels, as defined in the HTSUS.
- Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
- ASTM specifications A710 and A736.
- USS abrasion-resistant steels (USS AR 400, USS AR 500).
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
The merchandise subject to the order is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7188.8.131.52, 7184.108.40.206, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7220.127.116.11, 718.104.22.168, and 722.214.171.124. Certain hot-rolled carbon steel flat products covered by the order, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7126.96.36.199, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7188.8.131.52, 7184.108.40.206, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise under review is dispositive.
Rescission of Administrative Review
In accordance with 19 CFR § 351.213(d)(3), the Department may rescind an administrative review, in whole or with respect to a particular exporter or producer, if the Department concludes that, during the period covered by the review, there were no entries, exports, or sales of the subject merchandise. Because Essar was the only company for which a review was requested and it did not have any sales or exports of subject merchandise to the United States during the POR, we are rescinding this review pursuant to 19 CFR § 351.213(d)(3). See, e.g., Certain Steel Concrete Reinforcing Bars From Turkey; Final Results, Rescission of Antidumping Duty Administrative Review in Part, and Determination not to Revoke in Part, 68 FR 53127 (September 9, 2003) (after finding no evidence of entries of subject merchandise from two companies that made “no shipments” claims, the Department stated that “consistent with our practice, we are rescinding our review for Diler and Ekinciler”). Although Essar did not have any sales or exports of subject merchandise to the United States during the POR, its subject merchandise may have entered the United States during the POR under CBP's antidumping case number for Essar by way of intermediaries (without Essar's knowledge). Within 15 days of publication of this notice, the Department will instruct CBP to liquidate such entries at the “all-others” rate in effect on the date of the entry. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003).
Administrative Protective Orders
This notice serves as a reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR § 351.305(a)(3). Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
This notice is published in accordance with section 751(a)(1) of the Tariff Act of 1930, as amended, and 19 CFR 351.213(d)(4).Start Signature
Dated: October 6, 2006.
Stephen J. Claeys,
Deputy Assistant Secretary for Import Administration.
[FR Doc. E6-17041 Filed 10-13-06; 8:45 am]
BILLING CODE 3510-DS-S