Skip to Content

Notice

Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

In accordance with Section 223 of the Trade Act of 1974, as amended (19 U.S.C. 2273) the Department of Labor herein presents summaries of determinations regarding eligibility to apply for trade adjustment assistance for workers (TA-W) number and alternative trade adjustment assistance (ATAA) by (TA-W) number issued during the period of March 5 through March 9, 2007.

In order for an affirmative determination to be made for workers of a primary firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(a) of the Act must be met.

I. Section (a)(2)(A) all of the following must be satisfied:

A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

B. The sales or production, or both, of such firm or subdivision have decreased absolutely; and

C. Increased imports of articles like or directly competitive with articles produced by such firm or subdivision have contributed importantly to such workers' separation or threat of separation and to the decline in sales or production of such firm or subdivision; or

II. Section (a)(2)(B) both of the following must be satisfied:

A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

B. There has been a shift in production by such workers' firm or subdivision to a foreign country of articles like or directly competitive with articles which are produced by such firm or subdivision; and

C. One of the following must be satisfied:

1. The country to which the workers' firm has shifted production of the articles is a party to a free trade agreement with the United States;

2. The country to which the workers' firm has shifted production of the articles to a beneficiary country under the Andean Trade Preference Act, African Growth and Opportunity Act, or the Caribbean Basin Economic Recovery Act; or

3. There has been or is likely to be an increase in imports of articles that are like or directly competitive with articles which are or were produced by such firm or subdivision.

Also, in order for an affirmative determination to be made for secondarily affected workers of a firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(b) of the Act must be met.

(1) Significant number or proportion of the workers in the workers' firm or an appropriate subdivision of the firm have become totally or partially separated, or are threatened to become totally or partially separated;

(2) The workers' firm (or subdivision) is a supplier or downstream producer to a firm (or subdivision) that employed a group of workers who received a certification of eligibility to apply for trade adjustment assistance benefits and such supply or production is related to the article that was the basis for such certification; and

(3) either—

(A) The workers' firm is a supplier and the component parts it supplied for the firm (or subdivision) described in paragraph (2) accounted for at least 20 percent of the production or sales of the workers' firm; or

(B) A loss or business by the workers' firm with the firm (or subdivision) described in paragraph (2) contributed importantly to the workers' separation or threat of separation.

In order for the Division of Trade Adjustment Assistance to issue a certification of eligibility to apply for Alternative Trade Adjustment Assistance (ATAA) for older workers, the group eligibility requirements of Section 246(a)(3)(A)(ii) of the Trade Act must be met.

1. Whether a significant number of workers in the workers' firm are 50 years of age or older.

2. Whether the workers in the workers' firm possess skills that are not easily transferable.

3. The competitive conditions within the workers' industry (i.e., conditions within the industry are adverse).

Affirmative Determinations for Worker Adjustment Assistance

The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) of the Trade Act have been met.

TA-W-61,037; Flint Group North America Corporation, Flint Group Pigments Division, Holland, MI: February 27, 2006.

The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) of the Trade Act have been met.

TA-W-60,899; CCL Label St. Louis, Case Report Forms Dept., Aerotek, St. Charles, MO: January 30, 2006.

TA-W-60,928; Florence Design Group, Florence, AL: February 6, 2006.

TA-W-60,853; Artistree, Graham and Associates, Kernersville, NC: January 29, 2006.

The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) of the Trade Act have been met.

None.

The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) of the Trade Act have been met.

None.

Affirmative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-60,772; Harve Bernard Ltd, Bernard and Morton Co., Inc., Clifton, NJ: January 12, 2006. Start Printed Page 13528

TA-W-60,898; Thyssen Krupp Crankshafts Company, LLC, Danville Machining Div. Manpower, Imac, Kelly, Danville, IL: January 8, 2006.

TA-W-60,921; Weyerhaeuser Company, I Level Veneer Technology Division, Springfield, OR: February 1, 2006.

TA-W-60,923; Novtex Corporation, Adams, MA: February 7, 2006.

TA-W-60,955; Red Lion Manufacturing, Inc., JFC Staffing & Sesame/Personnel, Hallam, PA: February 2, 2006.

TA-W-60,980; WestPoint Home, Manpower Staffing, Bed Products, Abbeville, AL: February 14, 2006.

TA-W-60,983; United States Ceramic Tile Company, Lauffen International, Inc., East Sparta, OH: November 6, 2006.

TA-W-60,682; Meridian Automotive Systems, Plant 5, Kentwood, MI: December 21, 2005.

TA-W-60,807; NothelferGilman, Inc., Gilman Engineering and Manufacturing, Janesville, WI: January 22, 2007.

TA-W-60,851; Mastercraft Fabrics, LLC, Joan Fabrics Corporation, Cramerton, NC: January 29, 2007.

TA-W-60,856; Amery Technical Products, Inc., Lint Roller Division, Amery, WI: January 25, 2006.

TA-W-60,914; Martnrea Industries, Reed City Tool & Die Division, Reed City, MI: March 2, 2007.

The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-60,873; CML Innovative Technologies, Inc., Hackensack, NJ: January 19, 2006.

TA-W-60,992; Kimberly-Clark/Ballard Medical Products, Aerotek, SOS, Strategic Staffing, Draper, UT: March 11, 2007.

TA-W-60,952; Scovill Fasteners, Inc., Etcon Staffing, Clarkesville, GA: February 2, 2006.

TA-W-61,007; Venture Lighting International, Solon Division, Solon, OH: January 24, 2006.

TA-W-61,040; Imperial World Inc., dba World Pacific, Westmont, IL: February 7, 2006.

The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-60,816; Cooper Standard Automotive, Body and Chassis Div., Doubletree Personnel, Mega, Goldsboro, NC: January 23, 2006.

TA-W-60,872; Silberline Manufacturing Co., Inc., Corporation Division, Tamaqua, PA: January 22, 2006.

The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

None.

Negative Determinations for Alternative Trade Adjustment Assistance

In the following cases, it has been determined that the requirements of 246(a)(3)(A)(ii) have not been met for the reasons specified.

The Department has determined that criterion (1) of Section 246 has not been met. Workers at the firm are 50 years of age or older.

TA-W-60,899; CCL Label St. Louis, Case Report Forms Dept., Aerotek, St. Charles, MO.

TA-W-60,928; Florence Design Group, Florence, AL.

The Department has determined that criterion (2) of Section 246 has not been met. Workers at the firm possess skills that are easily transferable.

TA-W-60,853; Artistree, Graham and Associates, Kernersville, NC.

TA-W-61,037; Flint Group North America Corporation, Flint Group Pigments Division, Holland, MI.

The Department has determined that criterion (3) of Section 246 has not been met. Competition conditions within the workers' industry are not adverse.

None.

Negative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

In the following cases, the investigation revealed that the eligibility criteria for worker adjustment assistance have not been met for the reasons specified.

Because the workers of the firm are not eligible to apply for TAA, the workers cannot be certified eligible for ATAA.

The investigation revealed that criteria (a)(2)(A)(I.A.) and (a)(2)(B)(II.A.) (employment decline) have not been met.

TA-W-60,911; Truth Hardware, West Hazleton, PA.

TA-W-60,957; Douglas Quikut, Stamping Department, Walnut Ridge, AR.

TA-W-60,987; Stant Manufacturing Company, Manufacturing Division, Connersville, IN.

The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

None.

The investigation revealed that criteria (a)(2)(A)(I.C.) (increased imports) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

TA-W-60,548; Alan White Company, Sulligent, AL.

TA-W-60,757; Alan White Company, Shannon, MS.

TA-W-60,934; Golden Manufacturing Co., Marietta, MS.

TA-W-60,954; Congoleum Corporation, A Subsidiary of American Biltrite, Trainer, PA.

TA-W-60,738; Georgia Pacific LLC, A Subsidiary of Koch Industries, Crossett Paper Operations, Crossett, AR.

TA-W-60,811; George Weston Bakeries, Inc., Bayshore, NY.

TA-W-60,925; Westinghouse Electric, New Britain Operations Division, New Britain, CT.

The investigation revealed that the predominate cause of worker separations is unrelated to criteria (a)(2)(A)(I.C.) (increased imports) and (a)(2)(B)(II.C) (shift in production to a foreign country under a free trade agreement or a beneficiary country under a preferential trade agreement, or there has been or is likely to be an increase in imports).

None.

The workers' firm does not produce an article as required for certification under Section 222 of the Trade Act of 1974.

TA-W-60,104; International Business Machines (IBM), Division 35, San Jose, CA.

TA-W-60,969; RM International, Portland, OR.

The investigation revealed that criteria of Section 222(b)(2) has not been met. The workers' firm (or subdivision) is not a supplier to or a downstream producer for a firm whose workers were certified eligible to apply for TAA.

None.

I hereby certify that the aforementioned determinations were issued during the period of March 5 through March 9, 2007. Copies of these determinations are available for inspection in Room C-5311, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210 during normal business hours or will be mailed to persons who write to the above address.

Start Signature
Start Printed Page 13529

Dated: March 14, 2007.

Ralph DiBattista,

Director, Division of Trade Adjustment Assistance.

End Signature End Preamble

[FR Doc. E7-5236 Filed 3-21-07; 8:45 am]

BILLING CODE 4510-FN-P