Skip to Content

Notice

Certain Cut-to-Length Carbon-Quality Steel Plate from the Republic of Korea: Notice of Partial Rescission of Countervailing Duty Administrative Review

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

EFFECTIVE DATE:

July 6, 2007.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Jolanta Lawska, AD/CVD Operations, Office 3, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-8362.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background:

On February 28, 2007, Nucor Corporation (petitioner) requested that the Department of Commerce (the Department) conduct an administrative review of the countervailing duty order on certain cut-to-length carbon-quality steel plate from Korea with respect to Dongkuk Steel Mill Company Ltd. (DSM), TC Steel, and Daewoo Ship Engineering Company (DSEC) for the period of January 1, 2006, through December 31, 2006.

On March 28, 2007, the Department initiated the review. See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 72 FR 14516 (March 28, 2007). On May 3, 2007, petitioner withdrew its request for a review of TC Steel pursuant to section 351.213(d)(1) of the Department's regulations.

Scope of Order

The products covered by this order are certain hot-rolled carbon-quality steel: (1) universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a nominal or actual thickness of not less than 4 mm, which are cut-to-length (not in coils) and without patterns in relief), of iron or non-alloy-quality steel; and (2) flat-rolled products, hot-rolled, of a nominal or actual thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are cut-to-length (not in coils). Steel products to be included in the scope of the order are of rectangular, square, circular or other shape and of rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process (i.e., products which have been “worked after rolling”)--for example, products which have been beveled or rounded at the edges. Steel products that meet the noted physical characteristics that are painted, varnished or coated with plastic or other non-metallic substances are included within this scope. Also, specifically included in the scope of the order are high strength, low alloy (HSLA) steels. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Steel products to be included in this scope, regardless of Harmonized Tariff Schedule of the United States (HTSUS) definitions, are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is two percent or less, by weight; and (3) none of the elements listed below is equal to or exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, or 1.50 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.41 percent of titanium, or 0.15 percent of vanadium, or 0.15 percent zirconium. All products that meet the written physical description, and in which the chemistry quantities do not equal or exceed any one of the levels listed above, are within the scope of this order unless otherwise specifically excluded. The following products are specifically excluded from the order: (1) products clad, plated, or coated with metal, whether or not painted, varnished or coated with plastic or other non-metallic substances; (2) SAE grades (formerly AISI grades) of series 2300 and above; (3) products made to ASTM A710 and A736 or their proprietary equivalents; (4) abrasion-resistant steels (i.e., USS AR 400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, A517 grade S, or their proprietary equivalents; (6) ball bearing steels; (7) tool steels; and (8) silicon manganese steel or silicon electric steel.

The merchandise subject to the order is currently classifiable under the HTSUS under subheadings: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.40.3050, 7225.40.7000, 7225.50.6000, 7225.99.0090, 7226.91.5000, 7226.91.7000, 7226.91.8000, 7226.99.0000.

Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise covered by the order is dispositive.

Partial Rescission of Review

If a party that requested a review withdraws the request within 90 days of the date of publication of the notice of initiation of the requested review, the Secretary will rescind the review, in whole or in part, pursuant to 19 CFR 351.213(d)(1). In this case, petitioner withdrew its request for an administrative review for TC Steel within 90 days from the date of initiation. No other interested party requested a review of TC Steel and we have received no comments regarding the petitioner's withdrawal of its request for a review. Therefore, consistent with 19 CFR 351.213(d)(1), we are rescinding Start Printed Page 36963this review of the countervailing duty order on certain cut-to-length carbon-quality steel plate from Korea in part with respect to TC Steel.

The Department intends to issue assessment instructions to U.S. Customs and Border Protection (CBP) 15 days after the publication of this notice. The Department will direct CBP to assess countervailing duties at the cash deposit rate in effect on the date of entry for entries during the period January 1, 2006, through December 31, 2006.

This notice is in accordance with section 777(i)(1) of the Tariff Act of 1930, as amended and 19 CFR 251.213(d)(4).

Start Signature

Dated: June 28, 2007.

Stephen J. Claeys,

Deputy Assistant Secretary for Import Administration.

End Signature End Supplemental Information

[FR Doc. E7-13135 Filed 7-5-07; 8:45 am]

BILLING CODE 3510-DS-S