Skip to Content


Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble Start Printed Page 8030


Economic Development Administration, Department of Commerce.


Notice and Opportunity for Public Comment.

Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the

firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm's workers, or threat thereof, and to a decrease in sales or production of each petitioning firm.

List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment

[January 1, 2008 through January 31, 2008]

FirmAddressDate accepted for filingProducts
Master Solutions, IncPO Box 4444, 20 Wolfbridge Road, Carlisle, PA 170131/2/2008Material handling systems; automatic truck loading systems; and specialty trailer manufacturing.
Advanced Cast Products, Inc18700 Mill Street, Meadville, PA 163351/3/2008Manufactures ductile iron parts for a variety of industries.
The William L. Bonnell Company, Inc25 Bonnel Street, Newman, GA 302631/3/2008
John J. Steuby Company6002 N. Lindbergh, Hazelwood, MO 630421/4/2008
Century Specialty Windows, Inc#1 Flair Road, US Highway 72, Lumberton, NC 283581/7/2008The company manufactures and markets decorative specialty windows, clear and decorative glass inserts and window operating hardware to domestic markets.
TGZ Acquisition Company, LLC dba JACE2 Pin Oak Lane, Suite 200, Cherry Hill, NJ 080031/8/2008Manufactures, sells, and rents Continuous Passive Motion (CPM) and electrotherapy devices.
Boyce Highlands, Inc14 Whitney Road, Concord, NH 033011/8/2008Custom-made solid wooden moldings, both finished & unfinished.
Steel Parts Manufacturing801 Berryman Pike, Tipton, IN 460721/8/2008Parts of clutches and similar stamped steel transmission components for the automotive industry.
Sierra Midwest, Inc3100 S. Santa Fe Street, Chanute, KS 667201/10/2008Single, double and multi-sided printed circuit boards.
AFC Stamping & Production, Inc4900 Webster St, Dayton, OH 454141/14/2008Metal stampings for the motor vehicle, appliance, medical device and other industries.
Century Industries, Inc2300 E 145th St, Little Rock, AR 72206-58091/14/2008Folding attic stairways.
AFC Stamping & Production, Inc4900 Webster St, Dayton, OH 454141/14/2008Metal stampings for the motor vehicle, appliance, medical device and other industries.
Helton Inc8700 Manchester Highway, Morrison, TN 373571/16/2008The company produces, markets and distributes thermoformed plastic products and cast urethanes, mainly to OEM manufactures for parts and final assemblies.
Kitco, Inc520 N Enterprise Drive, Warrensburg, MO 640931/17/2008Fiberglass parts.
Schuetz Tool & Die, Inc807 Utah St, Hiawatha, KS 664341/18/2008Tools, Dies, and Parts.
LuSys Laboratories3716 Camel View Road, San Diego, CA 921301/24/2008One-Step Diagnostic Rapid Test—Manufacturing process: Manufacture test strip into plastic cassette, seal into a foil pouch, place 25 pouches into a commercial box, and ship to customer.
Parmelee Industries, Inc. dba U.S. Safety8101 Lenexa Drive, Lenexa, KS 662141/31/2008Eye and face protective gear.
Vinylex Corporation2636 Byington-Solway Road, Knoxville, TN 379311/31/2008Manufactures thermoplastics: Piping, siding, profile tubing (raw materials: PVC & EVA plastics).
Start Printed Page 8031

Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Office of Performance Evaluation, Room 7009, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA's final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance.

Start Signature

Dated: January 11, 2008.

William P. Kittredge,

Program Officer for TAA.

End Signature End Preamble

[FR Doc. 08-570 Filed 2-11-08; 8:45 am]