This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
Pursuant to Section 6(c) of the Educational, Scientific and Cultural Materials Importation Act of 1966 (Pub. L. 89-651, as amended by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for which the instruments shown below are intended to be used, are being manufactured in the United States.
Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before May 24, 2010. Address written comments to Statutory Import Programs Staff, Room 3720, U.S. Department of Commerce, Washington, D.C. 20230. Applications may be examined between 8:30 A.M. and 5:00 P.M. at the U.S. Department of Commerce in Room 3720.
Docket Number: 10-008. Applicant: Colorado State University, Department of Biomedical Sciences 200 Westlake St., Campus Delivery 1617, Fort Collins, CO 80523. Instrument: Electron Microscope. Manufacturer: JEOL, Ltd., Japan. Intended Use: This instrument will be used for the tomographic analysis of viruses. Justification for Duty-Free Entry: There are no instruments of the same general category as this instrument being produced in the United States. Application accepted by Commissioner of Customs: April 15, 2010.
Docket Number: 10-009. Applicant: University of Oregon, Purchasing & Contracting Services, 720 E. 13th Ave., Suite 302, Eugene, OR 97401-3753. Instrument: Electron Microscope Manufacturer: FEI Company, Czech Start Printed Page 23670Republic. Intended Use: This instrument will be used to study the size, shape and elemental compositions of nanoparticles to determine the effect on biological interactions at the nano scale. Justification for Duty-Free Entry: There are no instruments of the same general category as this instrument being produced in the United States. Application accepted by Commissioner of Customs: April 15, 2010.Start Signature
Dated: April 28, 2010.
Gregory W. Campbell,
Acting Director, IA Subsidies Enforcement Office.
[FR Doc. 2010-10487 Filed 5-3-10; 8:45 am]
BILLING CODE 3510-DS-S