Food and Drug Administration, HHS.
The Food and Drug Administration (FDA) is announcing that a proposed collection of information has been submitted to the Office of Management and Budget Start Printed Page 1170(OMB) for review and clearance under the Paperwork Reduction Act of 1995.
Fax written comments on the collection of information by February 7, 2011.
To ensure that comments on the information collection are received, OMB recommends that written comments be faxed to the Office of Information and Regulatory Affairs, OMB, Attn: FDA Desk Officer, FAX: 202-395-7285, or e-mailed to firstname.lastname@example.org. All comments should be identified with the OMB control number 0910-0553. Also include the FDA docket number found in brackets in the heading of this document.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Daniel Gittleson, Office of Information Management, Food and Drug Administration, 1350 Piccard Dr., PI50-400B, Rockville, MD 20850, 301-796-5156, e-mail: Daniel.Gittleson@fda.hhs.gov.End Further Info End Preamble Start Supplemental Information
In compliance with 44 U.S.C. 3507, FDA has submitted the following proposed collection of information to OMB for review and clearance.
Medical Devices: Recommended Glossary and Educational Outreach to Support Use of Symbols on Labels and in Labeling of In Vitro Diagnostic Devices Intended for Professional Use—(OMB Control Number 0910-0553)—Extension
Section 502 of the Federal Food, Drug, and Cosmetic Act (the FD&C Act) (21 U.S.C. 352), among other things, establishes requirements for the label or labeling of a medical device so that it is not misbranded. Section 351 of the Public Health Service Act (the PHS Act) (42 U.S.C. 262) establishes requirements that manufacturers of biological products must submit a license application for FDA review and approval prior to marketing a biological product for introduction into interstate commerce.
In the Federal Register of November 30, 2004 (69 FR 69606), FDA published a notice of availability of the guidance entitled “Use of Symbols on Labels and in Labeling of In Vitro Diagnostic Devices Intended for Professional Use.” The guidance document provides guidance for the voluntary use of selected symbols in place of text in labeling. It provides the labeling guidance required for: (1) In vitro diagnostic devices (IVDs), intended for professional use under 21 CFR 809.10, FDA's labeling requirements for IVDs; and (2) FDA's labeling requirements for biologics, including IVDs under 21 CFR parts 610 and 660. Under section 502(c) of the FD&C Act, a drug or device is misbranded, “* * *If any word, statement, or other information required by or under authority of this Act to appear on the label or labeling is not prominently placed thereon with such conspicuousness (as compared with other words, statements, designs, or devices, in the labeling) and in such terms as to render it likely to be read and understood by the ordinary individual under customary conditions of purchase and use.”
The guidance document recommends that a glossary of terms accompany each IVD to define the symbols used on that device's labels and/or labeling. Furthermore, the guidance recommends an educational outreach effort to enhance the understanding of newly introduced symbols. Both the glossary and educational outreach information will help to ensure that IVD users will have enough general familiarity with the symbols used, as well as provide a quick reference for available materials, thereby further ensuring that such labeling satisfies the labeling requirements under section 502(c) of the FD&C Act and section 351 of the PHS Act.
The likely respondents for this collection of information are IVD manufacturers who plan to use the selected symbols in place of text on the labels and/or labeling of their IVDs.
The glossary activity is inclusive of both domestic and foreign IVD manufacturers. FDA receives submissions from approximately 689 IVD manufacturers annually. The number of hours per response for the glossary and educational outreach activities were derived from consultation with a trade association and FDA personnel. The 4-hour estimate for a glossary is based on the average time necessary for a manufacturer to modify the glossary for the specific symbols used in labels or labeling for the IVDs manufactured.
In the Federal Register of October 5, 2010 (75 FR 61494), FDA published a 60-day notice requesting public comment on the proposed collection of information. No comments were received.
FDA estimates the burden of this collection of information as follows:
|Section 502 of the FD&C Act/Section 351 of the PHS Act||Number of respondents||Annual frequency per response||Total annual responses||Hours per response||Total hours|
|1 There are no capital costs or operating and maintenance costs associated with this collection of information.|
Dated: January 3, 2011.
Acting Assistant Commissioner for Policy.
[FR Doc. 2011-74 Filed 1-6-11; 8:45 am]
BILLING CODE 4160-01-P