The Centers for Disease Control and Prevention (CDC) publishes a list of information collection requests under review by the Office of Management and Budget (OMB) in compliance with the Paperwork Reduction Act (44 U.S.C. Chapter 35). To request a copy of these requests, call the CDC Reports Clearance Officer at (404) 639-5960 or send an e-mail to firstname.lastname@example.org. Send written comments to CDC Desk Officer, Office of Management and Budget, Washington, DC 20503 or by fax to (202) 395-5806. Written comments should be received within 30 days of this notice.
Respiratory Protective Devices—42 CFR part 84—Regulation 0920-0109- Extension—National Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control and Prevention (CDC).
Background and Brief Description
This data collection was formerly named Respiratory Protective Devices 30 CFR part 11 but in 1995, the respirator standard was moved to 42 CFR part 84. The regulatory authority for the National Institute for Occupational Safety and Health (NIOSH) certification program for respiratory protective devices is found in the Mine Safety and Health Amendments Act of 1977 (30 U.S.C. 577a, 651 et seq., and 657(g)) and the Occupational Safety and Health Act of 1970 (30 U.S.C. 3, 5, 7, 811, 842(h), 844). These regulations have as their basis the performance tests and criteria for approval of respirators used by millions of American construction workers, miners, painters, asbestos removal workers, fabric mill workers, and fire fighters. Regulations of the Environmental Protection Agency (EPA) and the Nuclear Regulatory Commission (NRC) also require the use of NIOSH-approved respirators. These regulations also establish methods for respirator manufacturers to submit respirators for testing under the regulation and have them certified as NIOSH-approved if they meet the criteria given in the above regulation. NIOSH, in accordance with 42 CFR Part 84: (1) Issues certificates of approval for respirators which have met specified construction, performance, and protection requirements; (2) establishes procedures and requirements to be met in filing applications for approval; (3) specifies minimum requirements and methods to be employed by NIOSH and by applicants in conducting inspections, examinations, and tests to determine effectiveness of respirators; (4) establishes a schedule of fees to be charged applicants for testing and certification, and (5) establishes approval labeling requirements. Information is collected from those who request services under 42 CFR part 84 in order to properly establish the scope and intent of request. Information collected from requests for respirator approval functions includes contact information and information about factors likely to affect respirator performance and use. Such information includes, but is not necessarily limited to, respirator design, manufacturing methods and materials, quality assurance plans and procedures, and user instruction and draft labels, as specified in the regulation.
The main instrument for data collection for respirator approval functions is the SAF, Standard Application for the Approval of Respirators, currently Version 7. A replacement instrument, SAF V.8, which collects the same information is available for applicants without the requisite software environment for V.7. Respirator manufacturers are the respondents (estimated to average 75 each year over the years 2011-2013) and upon completion of the SAF their requests for approval are evaluated. Although there is no cost to respondents to submit an application other than their time to participate, respondents requesting respirator approval are required to submit fees for necessary testing as specified in 42 CFR 84.20-22, 84.66, 84.258 and 84.1102. In calendar year 2010 $395,564.00 was accepted. Applicants are required to provide test data that shows that the respirator is capable of meeting the specified requirements in 42 CFR part 84. The requirement for submitted test data is likely to be satisfied by standard testing performed by the manufacturer, and no extra burden is expected.
42 CFR part 84 approvals offer corroboration that approved respirators are produced to certain quality standards. Although 42 CFR part 84 Subpart E prescribes certain quality standards, it is not expected that requiring approved quality standards will impose an additional cost burden over similarly effective quality standards that are not approved under 42 CFR Part 84. Manufacturers with current approvals are subject to site audits by the Institute or its agents. There is no fee associated with audits. Audits may occur periodically or as a result of a reported issue. An average of 61 site audits were conducted annually over the calendar years 2008-2010, and this rate is expected to continue.
There are no costs to the respondents other than their time. The total estimated annual burden hours are 138,840.Start Printed Page 28788
|Form||Number of respondents||Number of responses per respondent||Avg. burden per response (in hrs)||Total burden (in hrs)|
|Standard Application for the Approval of Respirators||75||8||229||137,400|
Dated: May 11, 2011.
Carol E. Walker,
Acting Reports Clearance Officer, Centers for Disease Control and Prevention.
[FR Doc. 2011-12170 Filed 5-17-11; 8:45 am]
BILLING CODE 4163-18-P