Environmental Protection Agency (EPA).
Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document, which covers the period from August 29, 2011 to September 9, 2011, and provides the required notice and status report, consists of the PMNs and TMEs, both pending or expired, and the NOC to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
Comments identified by the specific PMN number or TME number, must be received on or before November 4, 2011.
Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2011-0784, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:
- Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
- Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
- Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
Instructions: EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov Web site is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index available Start Printed Page 61693at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.Start Further Info
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 564-8955; e-mail address: email@example.com.
For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.End Further Info End Preamble Start Supplemental Information
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments, remember to:
i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information and/or data that you used.
v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.
vi. Provide specific examples to illustrate your concerns and suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.
viii. Make sure to submit your comments by the comment period deadline identified.
II. Why is EPA taking this action?
EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. This status report, which covers the period from August 29, 2011 to September 9, 2011, consists of the PMNs and TMEs, both pending or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Reports
In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity.Start Printed Page 61694
|Case No.||Received date||Projected notice end date||Manufacturer/ importer||Use||Chemical|
|P-11-0609||8/30/2011||11/27/2011||Crison LLC||(S) Monomer to be polymerized, copolymerized for use in coatings; medical research||(S) Propenoic acid, 3-[ (2-hydroxy-1,1-dimethylethyl)amino]-2-methyl- .|
|P-11-0610||8/30/2011||11/27/2011||Crison LLC||(S) Monomer to be polymerized, copolymerized for use in coatings; medical research||(S) Propenoic acid, 3-[ [ 1,1-bis (hydroxymethyl) propyl] amino]-2-methyl-.|
|P-11-0611||8/30/2011||11/27/2011||Crison LLC||(S) Monomer to be polymerized, copolymerized for use in coatings; medical research||(S) Propenoic acid, 3-[ [ 2-hydroxy -1-bism(hydroxymethyl) ethyl] amino]-2-methyl-.|
|P-11-0612||8/29/2011||11/26/2011||Nanotech Industries, Inc||(S) Flooring; paints; top coating||(S) Carbamic acid, N,N'-(trimethyl-1,6-hexanediyl)bis-, ester with 1,2-propanediol (1:2) .|
|P-11-0613||8/30/2011||11/27/2011||CBI||(G) Biodiesel and crude fuel additive||(G) Vinyl polymer grafted alkyl methacrylate.|
|P-11-0614||8/30/2011||11/27/2011||CBI||(G) Biodiesel and crude fuel additive||(G) Vinyl polymer grafted poly methacrylate.|
|P-11-0615||8/31/2011||11/28/2011||Corsitech||(S) Rheology additive to drilling fluids||(G) C18 dimer reaction product.|
|P-11-0616||9/1/2011||11/29/2011||CBI||(S) Component for industrial & commercial coatings||(G) Alkyl silsesquioxanes.|
|P-11-0617||9/6/2011||12/4/2011||CBI||(G) Dyestuff||(G) Substituted xanthene derivative.|
|P-11-0618||9/6/2011||12/4/2011||CBI||(G) Dyestuff||(G) Substituted anthraquinone derivative.|
|P-11-0619||9/6/2011||12/4/2011||CBI||(G) Industrial cleaning solution component||(G) Amino acid, carboxyalkyl, alkylsulfonate, alkali salt.|
|P-11-0620||9/6/2011||12/4/2011||CBI||(G) Industrial cleaning solution component||(G) Amino acid, carboxyalkyl, alkylsulfonate, alkali salt.|
|P-11-0621||9/6/2011||12/4/2011||IGM Resins Inc||(G) Polymeric photoinitiator||(G) Piperazino based aminoalkylphenone.|
|P-11-0622||9/7/2011||12/5/2011||Henkel Corporation||(S) Component in cyanoacrylate adhesive formulations||(S) 4,5,6,7-tetrahydro-isobenzofuran-1,3-dione.|
|P-11-0623||9/7/2011||12/5/2011||Cytec Industries Inc||(G) Coating resin for increased impact resistance.||(G) Heteromonocycle, homopolymer, disubstituted carbomonocycle, substituted alkyl ester.|
|P-11-0624||9/9/2011||12/7/2011||Oleon Americas Inc||(G) Industrial base oil||(G) Fatty acids, polymers with bicarboxylic acid, polyol and substituted alkanoic acid.|
In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received by EPA during this period: The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity.
|Case No.||Received date||Projected notice end date||Manufacturer/importer||Use||Chemical|
|T-11-0015||9/7/2011||10/21/2011||Cytec industries inc||(G) Coating resin for increased impact resistance||(G) Heteromonocycle, homopolymer, disubstituted carbomonocycle, substituted alkyl ester.|
In Table III. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity.Start Printed Page 61695
|Case No.||Received date||Commencement notice end date||Chemical|
|P-00-0533||9/8/2011||9/7/2011||(S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with 2,2'-[1,4-butanediylbis(oxymethylene)]bis[oxirane], dihydro-3-(tetrapropenyl)-2,5-furandione and à-hydro-omega-hydroxypoly(oxy-1,2-ethanediyl)- compd. with 2-(dimethylamino)ethanol.|
|P-08-0063||8/31/2011||8/26/2011||(G) Polyamide based on alkanedioic acid, alkyl lactam and polyoxyalkylene.|
|P-08-0347||9/8/2011||8/16/2011||(G) Alkyl lactyl lactate.|
|P-11-0058||8/26/2011||8/23/2011||(G) Aromatic diol, diaryl carboxylate.|
|P-11-0123||9/7/2011||8/2/2011||(G) Hydroxyalkyl methacrylate, reaction product with cyclic ether and cyclic carbonic acid anhydride.|
|P-11-0146||9/8/2011||7/26/2011||(G) Styrene-acrylic copolymer.|
|P-11-0219||8/30/2011||8/19/2011||(G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.|
|P-11-0278||9/6/2011||8/10/2011||(G) Heteromonocycle, polymer with disubstituted carbomonocyle and alkylene glycol, alkyl acrylate blocked.|
|P-11-0300||9/8/2011||9/1/2011||(G) Aromatic polyester polyol.|
|P-11-0309||8/29/2011||8/16/2011||(G) Hexanedioic acid, polymer with polyether polyol, 1,1'-methylenebis[4-isocyanatobenzene] and dihydroxydialkyl ether.|
|P-11-0339||9/6/2011||8/26/2011||(S) Multi-wall carbon nanotube also known as—mwnt.|
|P-11-0356||8/31/2011||8/4/2011||(G) Alkoxysilyl polyether prepolymer.|
|P-11-0357||9/8/2011||8/18/2011||(G) Polycarbonate type urethane resin.|
|P-11-0366||9/6/2011||8/21/2011||(G) 1-propanone, 2-hydroxy-2-methyl-, 1-(4-alkylaryl) derivs.|
|P-11-0375||9/1/2011||8/18/2011||(G) Solvent free aromatic adhesive.|
|P-11-0376||9/8/2011||9/3/2011||(G) Aliphatic alcohol type polyester.|
|P-11-0394||9/2/2011||8/30/2011||(S) Amines, C36-alkylenedi-, polymers with 5,5'-oxybis[1,3-isobenzofurandione], reaction products with maleic anhydride.|
If you are interested in information that is not included in these tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.Start List of Subjects
List of Subjects
- Environmental protection
- Hazardous substances
- Notice of commencement
- Reporting and recordkeeping requirements
- Test marketing exemptions
Dated: September 27, 2011.
Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. 2011-25706 Filed 10-4-11; 8:45 am]
BILLING CODE 6560-50-P