Import Administration, International Trade Administration, Department of Commerce.
In response to requests from petitioners, the Department of Commerce (“the Department”) has conducted an administrative review of the antidumping duty order on certain hot-rolled carbon steel flat products from India (“hot-rolled steel”) manufactured by Ispat Industries Limited (“Ispat”), JSW Steel Limited (“JSW”), and Tata Steel Limited (“Tata”). The period of review (“POR”) is December 1, 2009, through November 30, 2010. We determine that Ispat, JSW, and Tata had no entries of subject merchandise during the POR.
Effective Date: October 6, 2011.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Christopher Hargett or James Terpstra, AD/CVD Operations Office 3, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-4161 and (202) 482-3965, respectively.End Further Info End Preamble Start Supplemental Information
On June 2, 2011, the Department published in the Federal Register, the Preliminary Results  of this review.
The Department received no comments on the Preliminary Results.
Period of Review
The period covered by this review is December 1, 2009, through November 30, 2010.
Scope of the Order
The merchandise subject to the order is certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths, of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of the order.
Specifically included in the scope of the order are vacuum-degassed, fully stabilized (commonly referred to as interstitial-free (“IF”)) steels, high-strength low-alloy (“HSLA”) steels, and the substrate for motor lamination steels. IF steels are recognized as low-carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (“HTSUS”), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of the order unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of the order:
- Alloy hot-rolled carbon steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (“ASTM”) specifications A543, A387, A514, A517, A506).
- Society of Automotive Engineers (“SAE”)/American Iron & Steel Institute (“AISI”) grades of series 2300 and higher.
- Ball bearings steels, as defined in the HTSUS.
- Tool steels, as defined in the HTSUS.
- Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
- ASTM specifications A710 and A736.
- United States Steel (“USS”) Abrasion-resistant steels (USS AR 400, USS AR 500).
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
The merchandise subject to the order is currently classifiable in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 718.104.22.168, 722.214.171.124, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7126.96.36.199, 7188.8.131.52, and 7184.108.40.206. Certain hot-rolled carbon steel covered by the order, including: Vacuum-degassed fully stabilized; high-strength low-alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7220.127.116.11, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 718.104.22.168, 722.214.171.124, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, Start Printed Page 620407226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise subject to the order is dispositive.
Analysis of Comments Received
The Department received no comments regarding the Preliminary Results of this review.
Final Results of Review
We continue to determine that Ispat, JSW, and Tata had no reviewable entries of subject merchandise during the POR.
The Department intends to issue appropriate assessment instructions directly to U.S. Customs and Border Protection (“CBP”) 15 days after the publication of the final results of this review.
Since the implementation of the 1997 regulations, our practice concerning no-shipment respondents has been to rescind the administrative review if the respondent certifies that it had no shipments and we have confirmed through our examination of CBP data that there were no shipments of subject merchandise during the POR. As a result, in such circumstances, we normally instruct CBP to liquidate any entries from the no-shipment company at the deposit rate in effect on the date of entry. In our May 6, 2003, “automatic assessment” clarification, we explained that, where respondents in an administrative review demonstrate that they had no knowledge of sales through resellers to the United States, we would instruct CBP to liquidate such entries at the all-others rate applicable to the proceeding.
Based on Ispat, JSW, and Tata's assertions of no shipments and confirmation of those claims by examination of CBP data, we continue to determine that Ispat, JSW, and Tata had no sales to the United States during the POR.
Because “as entered” liquidation instructions do not alleviate the concerns which the May 2003 clarification was intended to address, we continue to find it appropriate in this case to instruct CBP to liquidate any existing entries of merchandise produced by Ispat, JSW, or Tata and exported by other parties at the all-others rate. In addition, the Department affirms its previous position in the Preliminary Results that it is more consistent with the May 2003 clarification not to rescind the review in part under these circumstances but, rather, to complete the review of Ispat, JSW, and Tata and issue appropriate instructions to CBP consistent with these final results.
Cash Deposit Requirements
The following deposit rates will be effective upon publication of the final results of this administrative review for all shipments of hot-rolled carbon steel flat products from India entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Tariff Act of 1930, as amended (“the Act”): (1) For Ispat, JSW, Tata, and for previously reviewed or investigated companies not listed above, the cash deposit rate will continue to be the company-specific rate published for the most recent final results in which that manufacturer or exporter participated; (2) if the exporter is not a firm covered in this review, a prior review, or the original less-than-fair-value (“LTFV”) investigation, but the Department examined the manufacturer in one of those proceedings, then the cash deposit rate will be the rate established for the most recently completed segment of this proceeding for the manufacturer of the merchandise; and (3) if neither the exporter nor the manufacturer is a firm covered in this or any previous review or the LTFV investigation conducted by the Department, the cash deposit rate will be 23.87 percent, the all-others rate established in the LTFV investigation. These cash deposit requirements, when imposed, shall remain in effect until further notice.
Notification to Importers
This notice serves as a reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping and countervailing duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping and countervailing duties occurred and the subsequent assessment of double antidumping and countervailing duties.
Notification to Interested Parties
This notice serves as the only reminder to parties subject to administrative protective order (“APO”) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
These final results of review are issued and published in accordance with sections 751(a)(1) and 777(i) of the Act.Start Signature
Dated: September 30, 2011.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
1. The petitioners are the United States Steel Corporation Steel and Nucor Corporation (collectively “petitioners”).Back to Citation
2. See Certain Hot-Rolled Carbon Steel Flat Products From India: Notice of Preliminary Results of 2009-2010 Antidumping Duty Administrative Review, 76 FR 31938 (June 2, 2011) (“Preliminary Results”).Back to Citation
3. See Antidumping Duties; Countervailing Duties: Final Rule, 62 FR 27296, 27393 (May 19, 1997).Back to Citation
4. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954, 23954 (May 6, 2003) (Assessment Policy Notice).Back to Citation
5. See Preliminary Results, 76 FR at 31939.Back to Citation
6. See, e.g., Magnesium Metal From the Russian Federation: Final Results of Antidumping Duty Administrative Review, 75 FR 56989, 56989-90 (September 17, 2010).Back to Citation
7. See Preliminary Results, 76 FR at 31939-40.Back to Citation
[FR Doc. 2011-25937 Filed 10-5-11; 8:45 am]
BILLING CODE 3510-DS-P