Skip to Content

Notice

Agency Information Collection Activities; Submission for OMB Review; Comment Request; Forging Machines

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

ACTION:

Notice.

SUMMARY:

The Department of Labor (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored information collection request (ICR) titled, “Forging Machines,” to the Office of Management and Budget (OMB) for review and approval for continued use in accordance with the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. 3501 et seq.).

DATES:

Submit comments on or before November 28, 2011.

ADDRESSES:

A copy of this ICR with applicable supporting documentation; including a description of the likely respondents, proposed frequency of response, and estimated total burden may be obtained from the RegInfo.gov Web site, http://www.reginfo.gov/​public/​do/​PRAMain, on the day following publication of this notice or by contacting Michel Smyth by telephone at (202) 693-4129 (this is not a toll-free number) or sending an email to DOL_PRA_PUBLIC@dol.gov.

Submit comments about this request to the Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, Occupational Safety and Health Administration (OSHA), Office of Management and Budget, Room 10235, Washington, DC 20503, Telephone: (202) 395-6929/Fax: (202) 395-6881 (these are not toll-free numbers), email: OIRA_submission@omb.eop.gov.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Contact Michel Smyth by telephone at (202) 693-4129 (this is not a toll-free number) or by email at DOL_PRA_PUBLIC@dol.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Under regulations 29 CFR 1910.218, it is mandatory for covered employers to conduct and to document periodic inspections of forging machines, guards, and point-of-operation protection devices and to mark manually controlled valves and switches. These requirements reduce workers' risks of death or serious injury by ensuring that forging machines used by them are in safe operating condition and that the workers are able to identify manually operated valves and switches.

This information collection is subject to the PRA. A Federal agency generally cannot conduct or sponsor a collection of information, and the public is generally not required to respond to an information collection, unless it is approved by the OMB under the PRA and displays a currently valid OMB Control Number. In addition, notwithstanding any other provisions of law, no person shall generally be subject to penalty for failing to comply with a collection of information if the collection of information does not display a valid OMB Control Number. See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this information collection under OMB Control Number 1218-0228. The current OMB approval is scheduled to expire on October 31, 2011; however, it should be noted that existing information collection requirements submitted to the OMB receive a month-to-month extension while they undergo review. For additional information, see the related notice published in the Federal Register on May 24, 2011 (76 FR 30200).

Interested parties are encouraged to send comments to the OMB, Office of Information and Regulatory Affairs at the address shown in the ADDRESSES section within 30 days of publication of this notice in the Federal Register. In order to help ensure appropriate consideration, comments should reference OMB Control Number 1218-0228. The OMB is particularly interested in comments that:

  • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility;
  • Evaluate the accuracy of the agency's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used;
  • Enhance the quality, utility, and clarity of the information to be collected; and
  • Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses.

Agency: Occupational Safety and Health Administration (OSHA).

Title of Collection: Forging Machines.

OMB Control Number: 1218-0228.

Affected Public: Private Sector—businesses or other for-profits and not for profit institutions.

Total Estimated Number of Respondents: 27,700.

Total Estimated Number of Responses: 1,440,788.

Total Estimated Annual Burden Hours: 187,264.

Total Estimated Annual Other Costs Burden: $0.

Start Signature

Dated: October 24, 2011.

Michel Smyth,

Departmental Clearance Officer.

End Signature End Supplemental Information

[FR Doc. 2011-27904 Filed 10-27-11; 8:45 am]

BILLING CODE 4510-26-P