Import Administration, International Trade Administration, Department of Commerce.
On August 1, 2011, the Department of Commerce (the Department) initiated a sunset review of the countervailing duty (CVD) order on certain lined paper products (CLPP) from India pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). See Initiation of Five-Year (“Sunset”) Review, 76 FR 45778 (August 1, 2011) (Initiation Notice). On the basis of a notice of intent to participate and an adequate substantive response filed on behalf of domestic interested parties and an inadequate response (in this case, no response) from respondent interested parties, the Department decided to conduct an expedited sunset review of this CVD order pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C). As a result of this review, the Department finds that revocation of the CVD order would be likely to lead to continuation or recurrence of a countervailable subsidy at the level indicated in the “Final Results of Review” section of this notice.
Effective Date: December 6, 2011.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
Eric Greynolds, AD/CVD Operations, Office 3, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street & Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-6071.
End Further Info
Start Supplemental Information
On August 1, 2011, the Department initiated a sunset review of the CVD order on LPP from India pursuant to section 751(c) of the Act. See Initiation Notice, 76 FR 45778 (August 1, 2011). The Department received a notice of intent to participate on behalf of the Association of American School Paper Suppliers (AASPS) and its individual members—MWV Consumer & Office Products (MWV), Norcom, Inc., and TopFlight, Inc. (collectively, petitioners), within the deadline specified in 19 CFR 351.218(d)(1)(i). The petitioners claimed interested party status under sections 771(9) (F) and 771(9)(C) of the Act, as an association of domestic producers of CLLP and domestic producers of CLPP, respectively.
The Department received a complete substantive response from the petitioners within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). However, the Department did not receive a substantive response from any respondent interested party to this proceeding. As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), the Department conducted an expedited review of this order.
Scope of the Order
The scope of this order includes certain lined paper products, typically school supplies,
composed of or including paper that incorporates straight horizontal and/or vertical lines on ten or more paper sheets,
including but not limited to such products as single- and multi-subject notebooks, composition books, wireless notebooks, looseleaf or glued filler paper, graph paper, and laboratory notebooks, and with the smaller dimension of the paper measuring 6 inches to 15 inches (inclusive) and the larger dimension of the paper measuring 83/4 inches to 15 inches (inclusive). Page dimensions are measured size (not advertised, stated, or “tear-out” size), and are measured as they appear in the product (i.e., stitched and folded pages in a notebook are measured by the size of the page as it appears in the notebook page, not the size of the unfolded paper). However, for measurement purposes, pages with tapered or rounded edges shall be measured at their longest and widest points. Subject lined paper products may be loose, packaged or bound using any binding method (other than case bound through the inclusion of binders board, a spine strip, and cover wrap). Subject merchandise may or may not contain any combination of a front cover, a rear cover, and/or backing of any composition, regardless of the inclusion of images or graphics on the cover, backing, or paper. Subject merchandise is within the scope of this order whether or not the lined paper and/or cover are hole punched, drilled, perforated, and/or reinforced. Subject merchandise may contain accessory or informational items including but not limited to pockets, tabs, dividers, closure devices, index cards, stencils, protractors, writing implements, reference materials such as mathematical tables, or printed items such as sticker sheets or miniature calendars, if such items are physically incorporated, included with, or attached to the product, cover and/or backing thereto.
Specifically excluded from the scope of this order are:
- Unlined copy machine paper;
- Writing pads with a backing (including but not limited to products commonly known as “tablets,” “note pads,” “legal pads,” and “quadrille Start Printed Page 76148pads”), provided that they do not have a front cover (whether permanent or removable). This exclusion does not apply to such writing pads if they consist of hole-punched or drilled filler paper;
- Three-ring or multiple-ring binders, or notebook organizers incorporating such a ring binder provided that they do not include subject paper;
- Index cards;
- Printed books and other books that are case bound through the inclusion of binders board, a spine strip, and cover wrap;
- Pictures and photographs;
- Desk and wall calendars and organizers (including but not limited to such products generally known as “office planners,” “time books,” and “appointment books”);
- Telephone logs;
- Address books;
- Columnar pads & tablets, with or without covers, primarily suited for the recording of written numerical business data;
- Lined business or office forms, including but not limited to: preprinted business forms, lined invoice pads and paper, mailing and address labels, manifests, and shipping log books;
- Lined continuous computer paper;
- Boxed or packaged writing stationery (including but not limited to products commonly known as “fine business paper,” “parchment paper,” and “letterhead”), whether or not containing a lined header or decorative lines; and
- Stenographic pads (steno pads), Gregg ruled,
measuring 6 inches by 9 inches.
Also excluded from the scope of this order are the following trademarked products:
- FlyTM lined paper products: A notebook, notebook organizer, loose or glued note paper, with papers that are printed with infrared reflective inks and readable only by a FlyTM pen-top computer. The product must bear the valid trademark FlyTM.
- ZwipesTM: A notebook or notebook organizer made with a blended polyolefin writing surface as the cover and pocket surfaces of the notebook, suitable for writing using a specially-developed permanent marker and erase system (known as a ZwipesTM pen). This system allows the marker portion to mark the writing surface with a permanent ink. The eraser portion of the marker dispenses a solvent capable of solubilizing the permanent ink allowing the ink to be removed. The product must bear the valid trademark ZwipesTM.
- FiveStar® AdvanceTM: A notebook or notebook organizer bound by a continuous spiral, or helical, wire and with plastic front and rear covers made of a blended polyolefin plastic material joined by 300 denier polyester, coated on the backside with PVC (poly vinyl chloride) coating, and extending the entire length of the spiral or helical wire. The polyolefin plastic covers are of specific thickness; front cover is 0.019 inches (within normal manufacturing tolerances) and rear cover is 0.028 inches (within normal manufacturing tolerances). Integral with the stitching that attaches the polyester spine covering, is captured both ends of a 1″ wide elastic fabric band. This band is located 23/8″ from the top of the front plastic cover and provides pen or pencil storage. Both ends of the spiral wire are cut and then bent backwards to overlap with the previous coil but specifically outside the coil diameter but inside the polyester covering. During construction, the polyester covering is sewn to the front and rear covers face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. The flexible polyester material forms a covering over the spiral wire to protect it and provide a comfortable grip on the product. The product must bear the valid trademarks FiveStar® AdvanceTM.
- FiveStar FlexTM: A notebook, a notebook organizer, or binder with plastic polyolefin front and rear covers joined by 300 denier polyester spine cover extending the entire length of the spine and bound by a 3-ring plastic fixture. The polyolefin plastic covers are of a specific thickness; front cover is 0.019 inches (within normal manufacturing tolerances) and rear cover is 0.028 inches (within normal manufacturing tolerances). During construction, the polyester covering is sewn to the front cover face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. During construction, the polyester cover is sewn to the back cover with the outside of the polyester spine cover to the inside back cover. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. Each ring within the fixture is comprised of a flexible strap portion that snaps into a stationary post which forms a closed binding ring. The ring fixture is riveted with six metal rivets and sewn to the back plastic cover and is specifically positioned on the outside back cover. The product must bear the valid trademark FiveStar FlexTM.
Currently, merchandise subject to this order is typically imported under headings 4810.22.5044, 4811.90.9050, 4820.10.2010, 4820.10.2020, 4820.10.2030, 4820.10.2040, 4820.10.2060, and 4820.10.4000 of the Harmonized Tariff Schedule of the United States (HTSUS). The tariff classifications are provided for convenience and customs purposes; however, the written description of the scope of the order is dispositive.
Analysis of Comments Received
All issues raised in this review are addressed in the Issues and Decision Memorandum (Decision Memorandum) from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Import Administration, dated concurrently with this notice, which is hereby adopted by this notice. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendation in this public memorandum which is on file electronically via Import Administration's Antidumping and Countervailing Duty Centralized Electronic Service System (IA ACCESS). Access to IA ACCESS is available in the Central Records Unit, room 7046, of the main Commerce building. In addition, a complete version of the Decision Memorandum can be accessed directly on the Web at http://ia.ita.doc.gov/frn. The electronic versions of the Decision Memorandum in IA ACCESS and on the Web are identical in content.
Final Results of Review
The Department determines that revocation of the countervailing duty order would be likely to lead to continuation or recurrence of a countervailable subsidy at the rates listed below:
Start Printed Page 76149
|All Other Producers/Exporters 8||9.89|
Notification Regarding Administrative Protective Order
This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
We are issuing and publishing these final results and notice in accordance with sections 751(c), 752, and 777(i)(1) of the Act.
End Supplemental Information
Dated: November 29, 2011.
Assistant Secretary for Import Administration.
[FR Doc. 2011-31290 Filed 12-5-11; 8:45 am]
BILLING CODE 3510-DS-P