This PDF is the current document as it appeared on Public Inspection on 01/20/2012 at 08:45 am.
The Commission hereby gives notice of the scheduling of the final phase of countervailing duty investigation No. 701-TA-480 (Final) under section 705(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b)) (the Act) and the final phase of antidumping investigation No. 731-TA-1188 (Final) under section 735(b) of the Act (19 U.S.C. 1673d(b)) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of subsidized and less-than-fair-value imports from China of high pressure steel cylinders, provided for in subheading 7311.00.00 of the Harmonized Tariff Schedule of the United States.
For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A through E (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).
Effective Date: December 15, 2011.
FOR FURTHER INFORMATION CONTACT:
Edward Petronzio (202) 205-3176, Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on (202) 205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at (202) 205-2000. General information concerning the Commission may also be obtained by accessing its Internet server (http://www.usitc.gov). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at http://edis.usitc.gov.
Background.—The final phase of these investigations is being scheduled as a result of affirmative preliminary determinations by the Department of Commerce that certain benefits which constitute subsidies within the meaning of section 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in China of high pressure steel cylinders, and that such products are being sold in the United States at less than fair value within the meaning of section 733 of the Act (19 U.S.C. 1673b). These investigations were requested in a petition filed on May 11, 2011, by Norris Cylinder Company, Longview, Texas.
Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations.
Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to section 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.
Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on April 17, 2012, and a public version will be issued thereafter, pursuant to section 207.22 of the Commission's rules.
Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on May 1, 2012, at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before April 25, 2012. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference to be held at 9:30 a.m. on April 27, 2012, at the U.S. International Trade Commission Building. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.
Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.23 of the Commission's rules; the deadline for filing is April 24, 2012. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of section 207.25 of the Commission's rules. The deadline for filing posthearing briefs is May 8, 2012; witness testimony must be filed no later than three days before the hearing. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before May 8, 2012. On May 23, 2012, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before May 25, 2012, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission's rules. All written submissions must conform with the provisions of section 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission's rules. Please be aware that the Commission's rules with respect to electronic filing have been amended. The amendments took effect on November 7, 2011. See 76 FR 61937 (Oct. 6, 2011) and the newly revised Commission's Handbook on E-Filing, available on the Commission's Web site at http://edis.usitc.gov.
Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.
In accordance with sections 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.
By order of the Commission.
Issued: January 17, 2012.
James R. Holbein,
Secretary to the Commission.
1. For purposes of these investigations, the Department of Commerce has defined the subject merchandise as Seamless steel cylinders designed for storage or transport of compressed or liquefied gas (“high pressure steel cylinders”). High pressure steel cylinders are fabricated of chrome alloy steel including, but not limited to, chromium-molybdenum steel or chromium magnesium steel, and have permanently impressed into the steel, either before or after importation, the symbol of a U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration (“DOT”) approved high pressure steel cylinder manufacturer, as well as an approved DOT type marking of DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T, or DOT-E (followed by a specific exemption number) in accordance with the requirements of sections 178.36 through 178.68 of Title 49 of the Code of Federal Regulations, or any subsequent amendments thereof. High pressure steel cylinders covered by the investigation have a water capacity up to 450 liters, and a gas capacity ranging from 8 to 702 cubic feet, regardless of corresponding service pressure levels and regardless of physical dimensions, finish or coatings. Excluded from the scope of the investigation are high pressure steel cylinders manufactured to UN-ISO-9809-1 and 2 specifications and permanently impressed with ISO or UN symbols. Also excluded from the investigation are acetylene cylinders, with or without internal porous mass, and permanently impressed with 8A or 8AL in accordance with DOT regulations.Back to Citation
[FR Doc. 2012-1162 Filed 1-20-12; 8:45 am]
BILLING CODE 7020-02-P